I just add a drop of hot glue to cover the glass breaker so when I need it I can rub the glue off.

@hvacbudget8600

Жыл бұрын

Great idea!

@haymaker299

Жыл бұрын

Great tip, thanks

@lawrencehubbard2985

Жыл бұрын

That is what I am going to do with it I have been thinking about what to do with without destroying the tool

I have one of these and its awesome. I use it camping and backpacking. The screwdriver kind of sucks but i dont need a drive while hiking. And if i lose it camping it's not my 120 dollar Wave Awesome tool for the money.

I just got mine from Amazon, and I’m so excited, I really wanted a leatherman but I couldn’t see spending so much, I tried eBay used, and the lowest I could score was around $80/$90 - this thing on the other hand seems really nice. I think I might get one for my father for Father’s Day. My only con was no spring pliers. And maybe they changed the design, my glass breaker is very smooth, doesn’t snag on my clothes or cut my hands/arm.

@hvacbudget8600

Жыл бұрын

Sounds great!

Really enjoy your content sir.. keep up the good work

@hvacbudget8600

Жыл бұрын

Thank you!

The file scraping on the body reminded me of the old Charge tti that i had, same problem, very different price category.

@hvacbudget8600

Жыл бұрын

Very interesting! I guess when a design gets copied even issues can be copied as well!

I put on roller bearings on my pliers , it opens up like butter now ! 👍

@hvacbudget8600

Жыл бұрын

Great idea!

@johndudley5761

Жыл бұрын

@@hvacbudget8600 thank-you very much 👍

If anyone has issues with the outer tools being stiff, likely it's a QC issue where either they used too large of a washer or the detent hole isn't drilled deep enough. I've seen both issues. I'd be curious to see if the brass washers you can get for the Leatherman wave would fit these. I feel it would be a good cheap upgrade.

@hvacbudget8600

Жыл бұрын

Excellent idea!

Sir, you're killing me! I'm so tempted to buy the Bibury 22 in 1. I think its the most appealing of any of the tools yet in the foreign plier based tool. It feels very strange and against the grain for me because it isn't a plier based Leatherman tool. The Signal is great. Don't own one but its nice for camping and outdoor activities. I still would prefer the Wave out of the three. The Wave is a "Gold Standard". Its a tool that includes something for everyone. You put my head in a vise, lol!

@hvacbudget8600

Жыл бұрын

LoL! It's definitely interesting what some of these companies are make!

@theoriginalchefboyoboy6025

Жыл бұрын

Dude, I used to buy multi-tools like my wife buys shoes - you can't just have one pair. Bust open a shoebox and indulge yourself...

How is the actual steel on it compared to Leatherman?

We really would like to know your views on the Pardelanti multitool. We found both the small & large quite interesting & functional but your reviews will clear a few things for us. Cheers mate. Warm greetings from Australia.

@hvacbudget8600

Жыл бұрын

Could you give me more info on those multi tools? All I can find is a Damascus knife from that company. Is there a website I could see it on. Always love to find new multi tools!! You guys over there may have a multi tool I can't get but would love to test. The Walther 150 multi tool. It doesn't look high quality but it looks very unique! I'll keep looking for it on ebay.

@unfi6798

Жыл бұрын

@@hvacbudget8600 Apology mate but couldn't find it either. Did went back to the shop but even they don't have any info on that multitool. It doesn't even say where it was made from or a maker's mark. I assume it's a local generic but with a fancy sheath that sounds Italian. Anyway had it for a couple of months & it is still rocking. So far all my contruction buddies were quite impressed with its performances. Cheers mate.

@hvacbudget8600

Жыл бұрын

@@unfi6798 No problem! Glad it's working well!

I like the billybury 👍

The inside tools are almost unusable because of the "hammer". I broke my Gerber Legend 800, replaced it with one of these tools, I miss all the tools being on the outside and the spring loaded pliers.

@hvacbudget8600

Жыл бұрын

The hammer does seem to be obstructive.

Can you teach me about the file ? One side is very diamond looking ‘ and one side is cross hatch looking” what situations would I use for each side?

@hvacbudget8600

Жыл бұрын

Some people use the diamond file for sharpening fishing hooks or knife blades in a pinch. It can also be used on glass and harder metals. The other side can be used on softer metals and materials.

@salgonzalez908

Жыл бұрын

@@hvacbudget8600 thank you for awesome video and super fast reply.

Used the back of the saw at a 45 degree angle to scrape the Ferrell rod. No sparks! Am I doing something wrong? Cheers.

@hvacbudget8600

9 күн бұрын

@JayDubbya This may sound like a dumb question but I'm assuming the black coating is scaped off the rod? Obviously it probably is. I'll have to look at mine and see which implement I used I can't remember.

@JayDubbya

9 күн бұрын

@@hvacbudget8600 never used one before. Working now. Thanks!

I like the Leatherman Signal it is a very nice-looking tool I may buy one at tax time

@hvacbudget8600

Жыл бұрын

It is a compact but very capable tool!

Wish the bilbury one had centerdrive screwdriver on it then would be spot on

@hvacbudget8600

Жыл бұрын

Agreed!

@chrisdyck6524

Жыл бұрын

Bibury 19-1 Multitool 🤷‍♂️👍

Anyone found replacements for ferro rod for the bibury?

@hvacbudget8600

2 ай бұрын

Not yet.

Can the bibury hold a 1/4 hex shaft?

@hvacbudget8600

Жыл бұрын

Sort of. The hammer head can fit 1/4 bits on it so a 1/4 adapter would fit into the notch partway. It might wobble because it's a shallow space for even a bit

If it's sitting in your pocket, no one would pull it the way you demonstrated. They'd pick it up from the sides to pull out of their pocket. The only negatives for me are the weight and the combo knife blade. I'd rather have a complete, plain edge.

@stevemazzilli4006

Жыл бұрын

why do they do a combo blade? frustrating

Some more negatives: The whistle is pretty awful. I don't know if it's still the case but back in December I couldn't find any way to buy a replacement ferro rod. Also no replacement wire cutters were available. Apart from that it's a great tool. Comparing it to my Leatherman and Gerber tools I think that the quality is really close. I've got no complaints about the tools, the construction or the functionality.

@hvacbudget8600

Жыл бұрын

Good points!

@jayyy4491

Жыл бұрын

Figure out anything for those issues yet)

I ordered one

@hvacbudget8600

4 ай бұрын

Nice!

9.6 ounces = 272,15 gram - 0:52

😀😀cool

@hvacbudget8600

Жыл бұрын

Thanks!

I cannot find this anywhere

@hvacbudget8600

Жыл бұрын

If you click under the video in the description and hit more. There should be an Amazon link that brings it up.

No 1/4” driver is a deal breaker for me!

Not available on Amazon as of June 2023

@hvacbudget8600

Жыл бұрын

Which one? I just checked and all three links work for me.

@MikeBaxterABC

Жыл бұрын

@@hvacbudget8600 Ill check (maybe I messed up) and report back after my dinner :)

There isn’t an “x” in especially