Nice trolling motor, I’m running a 5.7 hemi on my kayak

@jakethroughthelens2512

3 жыл бұрын

That’s it? 🤣

Finally tested this out. Kayak Fishing supplies did a great job. Thanks again for the recommendation.

Sick setup :) Tight lines brother.

Man this came out great! Sweet rig bro so stoked I got be apart of this process! 👊🏻

@jakethroughthelens2512

3 жыл бұрын

Thanks man, appreciate it 🙌

Nice job brotha! Clean install. Now I know who to go to when I get my motorguide.

@jakethroughthelens2512

3 жыл бұрын

Yessir! Let me know when you’re ready

Sweet set up man

Dude this is awesome

That’s a Nice pulley set up for deploying the motor.

@jakethroughthelens2512

3 жыл бұрын

Yup works great! Thanks for watching

Thank you for this awesome video! ^_^

Placed an order with KFS, thanks for sharing the build.

@jakethroughthelens2512

3 жыл бұрын

Awesome, you’ll love it!

Sweet setup

@jakethroughthelens2512

3 жыл бұрын

Appreciate it!

It would be super-helpful to provide a link to the parts, like the thru-hull fittings or the part you used to allow the cord connected to the trolling motor to swivel... or at least what they are called. Having a hard time tracking them down.

Looking sweet!

@jakethroughthelens2512

3 жыл бұрын

Thanks Greg!

What size eye screw is that for the live-scope bracket? Also, what kit did you use for the mod of the release pedal line, inserts, knobs?

It's dirrty because I catch fish. Haha love it.

@jakethroughthelens2512

3 жыл бұрын

Lol yup 🤣👍

I stuck an Xi3 on the Bow of my Predator PDL last year. I am now addicted to that TM. However, mounting all that weight on the bow really affected the kayak's handling in adverse conditions. I am curious how the PA handles all that bow weight. Have you noticed changes in how it handles since the install?

Sick!

@jakethroughthelens2512

3 жыл бұрын

Thank you 🙌

Nice setup ,where can I buy clamp for raising the motor

Ehhh! I see you decided to go through with the bow mount motor. Nice setup, im going to need to make my lever and pulley release more efficient and clean like yours.

@jakethroughthelens2512

3 жыл бұрын

Yup! Loving it, let me know if you have any questions

this is a beautiful kayak and how its set up. But what is the part name for the cable coming out of the kayak floor for the trolling motor?

Slick!

@jakethroughthelens2512

3 жыл бұрын

Thanks bro 👊

Do you remove the trolling motor during transport or is it sturdy enough to leave it on without damaging the kayak?

Nice set up! What battery did you decide to go with?

Do you get water in the hull when you run the motor. I had mine out today and had some water in the hull at the end of the day.

Jake, how did they accomplish running the pull cable for the xi3 release lever?

Wow sweet rig how’s the 360 drive still a lot of problems what’s your experience

Nice video. Are you using it in saltwater too? I noticed on their site the saltwater version is coming in 2022. Curious if you are using yours in saltwater anyway and how it is holding up.

Is the hobie pro angler 14 with a 360 drive is it good in saltwater or is the Old Town 136 autopilot better

How did you secure Anderson connector bolts or just screws

Sweet setup. Do you leave the trolling motor attached and the battery on your kayak during transport? Also, can you leave your rods in the thru hull rod storage during transport? Thanks for the vid.

@jakethroughthelens2512

3 жыл бұрын

Thanks for watching! I don’t leave any of that in my kayak while transporting it. I have kept my rods in the hull storage a couple of times though without issue. Just make sure you strap them in with the little bungy cord. You could probably get away with leaving the battery in as well if you wanted to. I’m just paranoid I guess haha

What size wire are you running? And what are your Anderson connectors rated at? All I see is 50amp connectors

Hopefully there is a DIY with parts, instructions and tutorials of how to make the trolling motor pulley release and cables like how yours is set up

@jakethroughthelens2512

3 жыл бұрын

Good point, I’ll see what I can do!

@stuarts765

3 жыл бұрын

ever make video?

Man that is sick, but is there anyway that you can go into more detail on how they did the deployment pull rope system on releasing the motor? (On how they rigged it up and what they used and what mount is used to let the motor down)

@jakethroughthelens2512

3 жыл бұрын

Thanks yes I’ll try to do a more in depth video 👍

@steveparker7763

3 жыл бұрын

Garmin 0101278401 is on the shaft, and One Objective sells the through hull for the rope to deploy

How shallow can you go with that trolling motor setup?

Can you show how the cable is ran through the hull for the cord that locks and unlocks the pedal on the Xi3 please. Sick set up. I have pretty much same setup. Just trying to figure out how I can get my cable ran right.

@ronniecaldwell5944

2 жыл бұрын

Did you ever figure it out I’m looking to do the same

@stuarts765

2 жыл бұрын

@@ronniecaldwell5944 yeah buddy I sure did. I can't add pictures on here unfortunately

@stuarts765

2 жыл бұрын

@@ronniecaldwell5944 kzread.info/dash/bejne/eaugr9d-k7PZhLQ.html&ab_channel=Flukemaster this could help a bit

Where to get the pieces to pull the lever part?

Sick set up brother! How fast can that xi3 run your kayak?

@jakethroughthelens2512

3 жыл бұрын

Thanks man! It’s pretty quick the fastest I have hit is 5.0 mph. Runs about 4.7 on full power most of the time though

So on your ketch board you had two tourney tag holders one pouch and one clamped to the board. What is the one clamped to the board?

@jakethroughthelens2512

3 жыл бұрын

That one is sold by Ketch, you can find it on their website 👍

I think I’m gonna sell my PA12 One Objective Bow Mount and get a On The Water bow mount instead due to it being lifted an inch and a half allowing to install a pulley on the mount itself for the motor release instead of drilling. Also it comes with red/green lights already

Love it! Can this be used in saltwater?

@jakethroughthelens2512

3 жыл бұрын

The kayak yes, the motor is rated for freshwater but they sell saltwater versions 👍

@CurrentJAM

3 жыл бұрын

@@jakethroughthelens2512 thanks Jake. I ordered the saltwater version.

Subbed...

where did you get the clamp that was attached to the shaft of the trolling motor.

@jimdillard2180

2 жыл бұрын

following this question also

Do you know what piece they used to attach and hold in place the power pole connector to your boat?

@jakethroughthelens2512

3 жыл бұрын

Sorry not sure what you are referring to. I don’t have a power pole

Hey do you take on water when your full speed on your trolling motor?

@applegatefishing

2 жыл бұрын

I'm running the same setup, as long as the wind is 15 mph or less I'll get a little bit of water at full speed that comes up through my scupper holes. That is the only water I have seen, if you're going full speed into white capping waves you'll definitely get wet. I'll eventually post up some new videos with the setup on my channel as a lot of people have questions about it.

Lot of salty comments in here. 🤣 Awesome build man. I'll be doing mine as close to yours as possible. 👍👍

@jakethroughthelens2512

3 жыл бұрын

Lol for real. To each their own. You’ll love it 👊

Who makes the free swinging bracket that the pull handle is mounted to?

@jakethroughthelens2512

3 жыл бұрын

I believe it is intended to be used for Panoptix, so Garmin.

Hello.. What is the price of that set up, as is of July/August 2021?...Regards..

What did they use to hook to your pedal to release the trolling motor? What are specific parts?

@steveparker7763

3 жыл бұрын

Garmin 0101278401 is on the shaft, and One Objective sells the through hull for the rope to deploy

Daddy’s back👅👀👀

at 3:09 where to get that?

Keep us informed if you have any problems with cracking around that front handle from all that weight.

@jakethroughthelens2512

3 жыл бұрын

No issues yet but I will keep you all posted 👍

Would you please be able to tell me the name of that pulley mounting plate? Thanks!

@jakethroughthelens2512

3 жыл бұрын

Sorry I’m not sure I think it was custom from the shop. Let me see if I can find out from them 👍

@steveparker7763

3 жыл бұрын

Garmin 0101278401 is on the shaft, and One Objective sells the through hull for the rope to deploy

@BrianParkerson

3 жыл бұрын

@@steveparker7763 Thank you!!!! I've been looking for the right clamp to attach my deploy rope and I think I finally found it... sincere thanks for sharing! 👍

@ronniecaldwell5944

2 жыл бұрын

@@BrianParkerson can you share the info with me Brian I’m also looking for it.

Very nice, who rig this?

@jakethroughthelens2512

3 жыл бұрын

Thank you! Kayakfishingsupplies.com rigged it for me. All their contact information is in the description 👍

How tf do u steer it

And what are you doing for nav lights?

@jakethroughthelens2512

3 жыл бұрын

Nothing currently, need to get that figured out though!

@texas-linemangaming731

3 жыл бұрын

Yak power lights are awesome

Is this a $8K kayak?

What’s the price ??!

@jakethroughthelens2512

3 жыл бұрын

The motor with GPS pinpoint is $1,250 I believe. You also have the cost of the battery, whatever mount you choose, and other miscellaneous parts depending on what kayak your have. If you give kayak fishing supplies a call they should be able to get you a price for what you want to do

@saounyang

3 жыл бұрын

@@jakethroughthelens2512 BPS/Cabelas has an exclusive 52lb thrust with pinpoint for $999 but You would have to cut the shaft down since it’s 54 inches

Nice $20000 canoe !!!

Why not buy a small boat? It would be cheaper and roomier

I love $10,000 kayaks 😂

@jakethroughthelens2512

3 жыл бұрын

Me too 😍

I don’t understand why people buy a kayak and put a motor on it. Kayak paddles, exercise, solitude…all things to consider. Next week I’m buying a glider and putting an engine in it. Oh, wait,… that’s an airplane.