Send your device in for repair 👉 www.joesge.com/pages/repair-s...
Are you a repair ninja? Buy the parts here 👉 www.joesge.com/collections/sp...
Purchase tools 🧰 used in this repair here 👇
Thin Pry tool 👉 www.joesge.com/products/elect...
Cold Press Glue 👉 www.joesge.com/products/elect...
Steps to fix your device.
1. Heat up the edge of the housing with a heat gun or hairdryer at 150°C moving continuously around the edge of the ear bud for around 10-20 seconds
2. Use a thin metal pry tool to gently pry in the gap between the two plastic shell pieces.
3. Work your way around the plastic housing prying them apart and using more heat when needed.
4. When there is a nice gap in the housing, you should be able to carefully pull them apart with your fingers.
5. Remove the adhesive that covers the ribbon cable connection for the outside housing piece then lift the ribbon out of it's connector. You may need to use some heat.
6. Pry the battery up and out of the housing.
7.
8.
9.
10.
11.
12. Get back to jamming out 🎵
Hello repair ninjas 🥷 As a way to help out with the increasing demand for videos of specific repairs, we have created a membership for our channel that allows you to request 1 custom repair video per month. The video you request will be put at the top of our queue and will be uploaded as quickly as possible. The video can also be started with a shout-out if you would like that. As always, thanks for checking out our repair dojo 🥷
Join Here 👉 bit.ly/3rMJJkW
Follow us on our social media for more repair content:
Instagram 📸 - / joesge
Facebook - / joesge
Feel free to reach out to our support team with any questions your brain has developed during the watching or pre-gaming of this video:
www.JoesGE.com 📲
Support@JoesGE.com 📩
360.362.1722 📞 (Text or Call)