This man is very knowledgeable and his videos are very helpful! Keep up the good work sir.

I'm very much a DIY person and this video is excellent for this type of machine, if i hadn't of seen this tutorial I would have taken the machine out, disconnected all the pipes and put it on it's side.. so simple to tackle the pump problem from the front. Great vid ! Thanks.

Very clear as always. A very good example for those attempting short instruction videos which are often hopeless!

@How-to-repair

Ай бұрын

Hi thanks a lot for your comment and I'm glad it helped. It would be really helpful for me to get my video shared and help us fight appliance waste! Please remember to subscribe to our channel, as that really helps us 😇 Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/ Thanks, Paul 👍

Excellent tutorial!! Really helpful! I was about to throw out my Bosch and buy a Miele until I viewed this!! You’ve saved me a small fortune!

Thanks for this!! We were getting an F-18 error on our Constructa washing machine. Your instructions (draining the machine, and manually cleaning the filthy and blocked pump) totally did the trick. :)

Thanks for a clear description of 'how to do it' & fault find on my Bosch washing machine.

@How-to-repair

Жыл бұрын

No probs Thank you for leaving a comment this is for you kzread.infoe432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍

Thxxx! Very clear, was 100% our issue. Without your perfect step by step we would have been at a loss. You saved us loads of cash! I do not understand why manufacturers cannot find a simple filter mechanism to prevent sticks etc to reach the drain pump

@How-to-repair

2 жыл бұрын

Glad it helped you please remember to subscribe as that's what's keeps this channel going. Thanks 👍

Thanks for helping me do this myself to find the tiny twig that I think had prevented pump from draining the machine.

@How-to-repair

2 ай бұрын

Hi thanks a lot for your comment and I'm glad it helped. It would be really helpful for me to get my video shared and help us fight appliance waste! Please remember to subscribe to our channel, as that really helps us 😇 Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/ Thanks, Paul 👍

You Sir are a God sent! Thank you so much for your service to save us some dollars and make us feel accomplished! Now I am waiting to see if I have removed all blockages.

@rudolfrudykudritzki

2 ай бұрын

BOSCH WFT7930/02 TypeD5393B000 Fyi, I managed to reduce the diameter of the drain hose leading to the Siphon drum. Now it works but the drainage is slow.

Thank you for your detailed instructions. My blockage was in the drain pipe connection to the s-bend. Check that first before taking your machine apart. Although i don't regret doing the maintenance and cleaning the machine pipes.

Really helpful. In my case it was just a pendant and a cocktail stick stuck in the impeller but the video helped me understand the draining process and what to check on the impeller. Bosch 1400 Express - 22+ years and still going!

@How-to-repair

Жыл бұрын

Yeah, those were the days when manufacturers used to care about the quality of the machines that they produced @pjskyboy please remember to subscribe to our channel as that really helps us kzread.infoe432SAb2g08 Thanks, Paul 👍

I thought it was the 73 cents, 1 p and half a balloon in the filter that stopped my Bosch Maxx7 draining, but no, I needed your excellent tutorial to remove the pump where I found that 10 swiss cents is there perfect diameter to block the draining tube. It's all gone back together well, no leaks as yet! I've bought you a beer 😁

Love your tutorials. You've already helped me repair my dishwasher. 🤞 I can fix the washing machine too

@How-to-repair

11 ай бұрын

Awesome! Thank you! Your next move will be cookers lol

Thanks for the help. My Bosch washing machine coming up with E18 error. Normal fixes weren't working. Came here, took the pump apart, and there was a whole sock sitting in the waste pipe!!! Just running a wash now, fingers crossed clearing it has worked!

@How-to-repair

Жыл бұрын

Glad it helped @4025SaM please remember to subscribe to our channel as that really helps us kzread.infoe432SAb2g08 Thanks, Paul 👍

Thank yo so much for your video. Very detailed and saved me calling the technician ($$$). I don't know how but a small face cloth made its way and blocked my washing machine and with your help I did the job myself

Gracias por transmitir sus conocimientos, buena pedagogía en sus clases, muy amena e instructiva su explicación.

Extremely great explanation in precise detail. Thank you. U dun good.

great tutorial! , great coach! plaesure to watch and to listen , and then to repeat it byself!

Ace very useful Video. Thanks

Thank you so much. Just cleaned our machine and the pump was just as filled with goo. Running the first program now. Hope your fix worked :) Cheers mate

@How-to-repair

2 жыл бұрын

Glad it helped Thank you For leaving a comment this is for you kzread.infoe432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍

Thank you. Sorted my problem……broken impeller exactly as in the video

@How-to-repair

Жыл бұрын

Glad it helped glad we could help you Marcus Adams this is for you kzread.infoe432SAb2g08 please remember to subscribe as that's what keeps this channel going. Thanks 👍

Thanks buddy. You saved me probably a 100 or more Euro. Fantastic instructionsn

Your videos are great! Thanks a lot!!

Hey :-) Your video is my favorite, you show and explain it very well. I`m trying to fix my Siemens Q700, but what surprised me are the strange screws under the machine, mine doesn't have them in the front. Well, I struggle with them.

@How-to-repair

2 жыл бұрын

Thanks 👍 for watching and please remember to subscribe to the Channel as that's what keeps us going in able to make the video for you

Paul please show a steam oven how it works and how to repair please please please

Good job!! Thank you. Greetings fron Spain 🇪🇸 👍🏻👍🏻

@How-to-repair

Жыл бұрын

Thank you too! Thank you for leaving a comment, I would love you to leave your opinion on our poll about manufactures building in obsolescence to appliances. kzread.infoUgkxygHomnUySd_bYjaJBdEHPO6T4dYo9Ahm and this is for you kzread.infoe432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍

I have a serie 4 Vario perfect and there is access to the pump from underneath. Can I dropped the pump by removing the single screw holding the pump so I can disconnect the waste stand pipe without removing the front cover? The only problem with the machine is a blocked waste pipe.

Hi thanks this really helped but I have a couple of bits left but not sure where they come from

@How-to-repair

10 ай бұрын

You should always lay out screws and components that you take off in order and keep them organised. Then this would not happen when you reassemble the machine. @davidclark1222 please remember to subscribe to our channel as that really helps us kzread.infoe432SAb2g08 Thanks, Paul 👍

Most unusual jubilee clip hold the black sump hose to drum, is this reusable.

Im having trouble with my comfort not being taken while machine is on pls can u give me any suggestions to what to do thankx

Great video. I did all that, installed 2 brand new Bosch original pumps but still not draining, even when the pump is connected to outside 220v ac supply, All pumps run with no or little amount of water in the barrel. With water visible in the barrel the pumps will not drain/propeller not rotating only oscillating back and forth, making a strange low noise. The propeller tries to turn but isn’t strong enough. Any ideas.?

@How-to-repair

2 ай бұрын

Hi, I will need the full model number of the identification plate and the details of your problem. Please use our contact us page and make sure you fill out the request for what your problem is. A video shoot of the problem would be perfect as well. We will get back to you within 24 hours, normally. www.how-to-repair.com/help/contact-us/ Please remember to subscribe to our channel, as that's what keeps this channel going. Thanks 👍

Hi I open the circular little door on the bottom, lots of water came out with some fabrics as well… now it’s clean and the filter rotates fine , I also checked the hose (blow into it) and it looks like that it’s not blocked… But the machine still doesn’t drain the water… My washing machine is very clean and have no mold and so on also…

@dwqdwwdwqdqwd2950

Жыл бұрын

maybe the plumbing is blocked, outside the machine. But since it was a month ago, was it resolved?

Nice explanation Sri. Can you upload LG washing machine video and rational oven. How to maintain and service. Thank you.

@How-to-repair

5 ай бұрын

A while ago on KZread, you ask me a question about your LG washer. I just thought I’d let you know that I have now made a complete playlist to assist you in any repairs that you ever have. If it helps, you don’t forget to share it with your friends who may also own an LG. kzread.info/dash/bejne/qWmYvJaJmpuwlNI.html

We have similar problem, cleared F 18 blockage, checked sump even, no blockage, but now at end of wash, it fails to flush drum of water, however when i turn machine off and select " empty " option the machine emptied, so im wondering is the fault due to the valve that keeps the water in the drum not operating during final flush of wash.not sure if a new Pump will resolve it.

How important is the pump motor plastic water cover? I followed your instructions and came to a small issue. The new motor makes the power connection in the front whereas my old one connected in the rear. There is now way the old one can fit. Do I really need it?

Do you service Tumble Dryers too Paul? You do an excellent job. Thanks for sharing.

@How-to-repair

2 жыл бұрын

Yes I do! here are some i have done kzread.infosearch?query=tumble%20dryer

Me he suscrito, saludos

thankyou!

Do u know is there meant to be a small hole on the left wherebthe drainage cap is,because there is on mine and it was not draining as I pushed this hole it worked again ,like the size of a penny was there I think

How do I turn the buzzer of on my Bosch varioperfect washing machine

WFT7930/02 FD 7506 00041. I reduced the diameter of the drain hose that leads to the syphon/vacuum caseand it works. it boils down that the pumps(genuine/brand new from the box) are not able to pump the water from the vaccum/sump line. does not make sense.

@How-to-repair

2 ай бұрын

if you use the contact us page on the website, I'll be happy to try and assist you.

Thank you for your video. I fixed my machine but i can't seem to put the ring with the spring back on the door seal. You made it look simple just using a screwdriver but when I try to put it on it doesn't fit back on. Any ideas?

@How-to-repair

Жыл бұрын

Andrea Rossi try having a look for a Specific video on your make in our KZread channel. this is for you kzread.infoe432SAb2g08 please remember to subscribe as that's what keeps this channel going. Thanks 👍

Sir. Stella vid. BUT, the pump was running..... now and then. When tested with a meter it was 220 ohms. Should be between 100 and 200 ohms. New pump. Bobs ya Uncle.

@How-to-repair

7 ай бұрын

Glad it helped you

hi thanks for the info, my Series 8 was blocked and I followed your instructions only to find a small sock and a small piece of material in the rubber connection pipe, how do I stop this from happening

@How-to-repair

Жыл бұрын

over loaded machine or put soaks in a pillow case, Thank you for leaving a comment, I would love you to leave your opinion on our poll about manufactures building in obsolescence to appliances. kzread.infoUgkxygHomnUySd_bYjaJBdEHPO6T4dYo9Ahm and this is for you kzread.infoe432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍

Great video thanks. I have a Bosch series 8 WAW325H0GB/20. there was a leak and after removing the back panel i could see a piece of metal has pierced the sump hose. I have put a small clamp on it for now but need to order a new hose and not sure how different it is to remove the front panel. The slight difference is its all in one piece on the front. Any ideas where on Bosch replacement parts I can get the number or is it worth just phoning them. I'm more concerned where this metal has come from its about 10cm long 2mm thick, spring or pipe re informing support. Any help I would really be grateful thank you.

@How-to-repair

Ай бұрын

Hi mate, I've created an FAQ page for you. You can find the sump hose spare part that you are looking for on this page. Here is the link: www.how-to-repair.com/faqs/bosch-waw325h0gb-20-washing-machine-pierced-sump-hose-replacement/ 😇 Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/ Please remember to subscribe to our channel, as that's what keeps this channel going. Thanks, Paul 👍

@pogmista

Ай бұрын

@How-to-repair Thank you so much Paul for helping me out with the link for spare parts and all your videos. I have subscribed and shared your good videos to my friends.

@How-to-repair

Ай бұрын

Thank you very much mate. Have a great day!

Hi. My pump has those 2 pipes for the hoses, and it has a smaller pipe not connected to anything. My mum says it could be a vent (a breather). when I poured bleach into the drain hose (from the end that is outside of the washing machine) to clean it, the bleach spilled out from bottom of the machine, from that corner, where the pump is. Could it be from that empty pipe? Or from where? On the next washing cycle, the machine didn't leak anything. btw the bleach worked perfectly for the soft stains inside the hose. I believe it was a foam that stayed there for years.

@prozdrowotny

2 жыл бұрын

my numbers from the door are: WAK24260PL/06

The machine spinning step is not working rest washing is done. It is a Bosch 7 kg machine. What can be the solution?

Very Good!

The drain pump will not unscrew more than 90 degrees, even with multiple twists and turns, WD40, and a wrench. What next? If I turn the machine on its back, will that help get the drain pump to unscrew, if something is blocking it?

@tompem

Жыл бұрын

You should remove the black inlet hose on the left (as you look at it). It most likely has an object in it that is preventing the screw cap from turning. There is a good video on it.

Hi could you help? I have a Bosch Maxx 6 washing machine (WAB28162GB). The machine won't drain water. I have taken off the front cap and there is no drain pipe? Do you know how I drain it?

@How-to-repair

Жыл бұрын

put a tray uder and go slow Thank you for leaving a comment, I would love you to leave your opinion on our poll about manufactures building in obsolescence to appliances. kzread.infoUgkxygHomnUySd_bYjaJBdEHPO6T4dYo9Ahm and this is for you kzread.infoe432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍

Found 5 coins just ahead of the pump

After resolving the F:18 problem-the fault code never came back. Our Bosch has now just stopped going into the rinse cycle and remains in a constant 'wash' cycle for infinity. Also, ( after manually draining the water out) it will neither or separately 'spin' 'drain' or 'rinse'. The rinse cycle had initially before this made some rough machine noises but never filled with water and assuming it detected the drum already had a quantity of water still remaining. The pump impeller appears to be okay. The question is what to do next?

@sidstewart7399

Жыл бұрын

Hi mine does the same. Did you ever get this resolved?

@patrickokeeffe6998

Жыл бұрын

We have similar problem, cleared F 18 blockage, checked sump even, no blockage, but now at end of wash, it fails to flush drum of water, however when i turn machine off and select " empty " option the machine emptied, so im wondering is the fault due to the valve that keeps the water in the drum

@binkky01

Жыл бұрын

hi did you find the fault my bosch doing the same thanks

@guineagirl5078

5 ай бұрын

Mine went like this. And I ended up buying a new one. I had to manually turn knob to rinse and spin. It went very noisy like an aeroplanes taking off. Had Bosch Serie 4 as a new one and it is brilliant. Old Bosch was 17 years old

Since when has Sammy the bull been fixing washing machines?

Thank you.

@How-to-repair

Жыл бұрын

glad we could help you FrnkPol this is for you kzread.infoe432SAb2g08 please remember to subscribe as that's what keeps this channel going. Thanks 👍

my plug won't turn ??

@gordonwong8852

Жыл бұрын

Mine neither

shall i call a technician to help me with it, i am afraid to do it by myself

@How-to-repair

2 жыл бұрын

It is worth taking the time to learn even if you get someone to assist you please remember to subscribe as that's is was keeps this channel going. Thanks 👍