Mind folks. Green Bosch is diy grade and Blue Bosch is professional but the batteries are not compatible.

Thank you so much for this video upload. Looking to put up some curtain poles but never used a power drill before. I was looking at the Bosch on Amazon UK but couldn't decide between the Bosch Easy Impact @£71.51 and the PSB 1800 @£77.90. After seeing it's demonstration here, I'm sold! Thank you.❤

No test necessary. Just take a Bosch.

love Bosch and it walked all over the B&D. great review

Had the b&d drill for 5 years served me well but always got frustrated with the chuck and struggled to drill through proper brick . Upgraded to a makita and its life changing 🙌

It was such a relief to find this video, because today when drilling drainage holes in plant pots, with my cordless Black & Decker, the drill bits kept going loose and falling out. Yes, I found a way round the problem was to stop drilling every few seconds to retighten the loosened chuck screw. But this didn't always work. I have been trying to find out today, to no avail until now, if it was ME who was doing something wrong to cause the loosening drill bits problem. I LOVE my MINI BLACK & DECKER HANDHELD CORDLESS VACUUM though. I've had it a few years now and it's a GREAT powerful vacuum upper of bits.

@MachineryNation

6 ай бұрын

Glad it was helpful 👍🏼

@asrr62

Ай бұрын

You know you can change the part off from the drill and put another one right. Chuck right.

Great video James! Really enjoy how there is the cross compatibility between Bosch and other brands for batteries. Can’t wait to see more

@MachineryNation

Жыл бұрын

Thank you Garrett, yes an exciting year ahead 👍🏼

Enjoyed the video a looooot mate!!!!

Hi James Nice little test I haven't used a black & decker for years think there's a few proper old ones in the shed🤣 Thanks again

@MachineryNation

Жыл бұрын

Yeah it does seem a bit of a ‘yesteryear’ brand. Thanks Darren 👍🏼

Been shopping around for a decent drill and have already settled on this bosch model and glad to see in this video it is performing well. £77.90 on amazon right now and £20.99 for a 70 piece drill and screwdriver bit set

@asrr62

Ай бұрын

I just don't like the angle of that Bosch, it looks stupid. Here in America we buy dewalt 😄

Whats the difference between the PSB 1800 li-2 and the easyimpact 18v-40? Cheers 🤙

James great video. I think you should have put them in Hammer mode for the longer screws. Just asking. Because a lot of impacts have Hammer mode on them. Have a good one tell Susan I said hi. 👍

@MachineryNation

Жыл бұрын

Thanks Dirt 👍🏼 I don’t think hammer mode is the same on drills as it is impact, but I will give it a go 👍🏼

@dirtriderkx500

Жыл бұрын

@@MachineryNation thank you again. Great video. 🍻

@thepewplace1370

Жыл бұрын

Don't use hammer mode on drills for fasteners: it will greatly increase the likelihood you strip out the head of the screw, and it also wastes energy that could otherwise be driving the screw in faster. Hammer mode in drills is completely different from the impact mechanism in impact drivers. Hammer drills move the bit towards and away from the material about 30k to 40k times per minute, in essence trying to mimic a jackhammer. The chuck assembly rides a series of small metal ramps that move it a mm or so forward and backward. It should be used for masonry applications only, with a carbide tipped masonry bit. Impact drivers, by contrast, do not use a direct drive (ie the electric motor is not connected to the bit via gears), but rather a hammer and anvil, with a spring, to transfer the electric motors energy, via rotational impacts of the hammer mass against the anvil, to turn to the fastener in the same way an impact wrench does lugnuts. They can be extremely fast due to no reduction gearing, but in high torque applications, a drill will often be faster. Impact drivers are not good for masonry drilling, although many masonry drill bit manufacturers will say their bits can be used in an impact driver at certain speeds, it's a poor attempt at a hammer drill, which is already a poor attempt at a rotary hammer.

Can you do more brands too please

Don't use drill that much for work, just a bit of trellis fitting, fence repairs and bolting fence spurs. Got a great deal on a Bosch Pro GSB-18V-55, GDX-18V-200, With a quick charger and two 5Ah batteries. Not top of the line but does everything I need! Wouldn't waste my money on anything BlacknDecker!

@keithroberts5611

Жыл бұрын

I used to own a B@D it brock after 15 months, Only ever used it half a dozen times never again!! Useless!!!

@VikingOlberg-NymoenOfNorway

Жыл бұрын

Your drill is pro grade man. Im a Milwaukee guy myself but I miss Bosch' comfort. Speed isnt everything

Nice video mate! I was expecting the Bosch to win, although at the price point, I wasn't sure by how much (B&D tools are so bad these days I figured it was pretty well guaranteed). What I was not expecting was how much better the entry-level Bosch tool *sounded*, compared to the B&D. The B&D sounded like it was struggling with the simplest tasks, whereas the Bosch sounded like a much higher grade of tool. The motor, the hammer action, the slowing under load, etc. The interchangeable batteries are a nice benefit too! If I were getting into a new platform of tools today, Bosch's high end stuff would definitely be on my list (although it'd be hard not to go with Hilti).

Will the drill bit be blunter after the B&D test? Did you use a new bit for both on the wood test?

@davexilly

8 ай бұрын

Answers are pretty obvious if you watch the video

On the B and D you set the clutch too low. Set it on Drill. You can take those screws out.

bosch hit B&D with a knock out punch in this one :)

I love my Milwaukee M12 fuel. Bosch should bring their green tools to the United States.

It has a Black+decker tool and I am very satisfied they do a great job

Decided not to join a Gymn, going to get the Drills great 👍 workout . Good laugh 😂.

@MachineryNation

Жыл бұрын

Hahaha thank you 😂😂

A best seller is a best seller for a reason 😅

Bro didn't tighten the chuck enough, but you can really tell on the screw test. Funbles multiple times on B&D but had them ready for Bosch😂

@MachineryNation

5 ай бұрын

Are you ok “Bro”? Need a hug? Perhaps B&D can send you some tissues…

@Grant849

5 ай бұрын

@@MachineryNation you can hug the chuck a little more and stop acting like a babbling knucklehead

@ifierceleonlee6776

3 ай бұрын

​@MachineryNation didn't do a good job, rushed it, probably bieng paid by bosch. Thumps down

@ifierceleonlee6776

3 ай бұрын

Hes moaning now because you called him out for his mistakes lol

@MachineryNation

3 ай бұрын

@@ifierceleonlee6776 wow, are you still at school or something? This video was not paid and is 100% what happened.

Excellent video James i use to have a 18v Bosch really good till i had it nicked, good saying that jesus wept mind so would you with nails in your hands 😂

@MachineryNation

Жыл бұрын

It’s a surprising little drill, looking forward to testing against others 👍🏼

@ljjonesy

9 ай бұрын

Still waiting... @@MachineryNation

James have you tried Flex Brand tools yet? I'm slowly moving to Flex. I've been a Milwaukee fan for years. I'm switching brands because I'm getting tired of fixing the trigger on all of M18 volt drill and drivers.

@MachineryNation

Жыл бұрын

I have but we can not get the 24v over here only the 18v red posh stuff that comes in a £1000 per drill 🙄 hopefully the 24v will be in the UK soon 🤗

@thepewplace1370

Жыл бұрын

Flex is super impressive, it's unfortunate they aren't selling their stuff in the UK. Hopefully they expand their lineup to include many more tools, and offer that lineup worldwide. As an aside, which M18 stuff have you had trigger issues with? Most of my tools at work are M18 and I've not had any trigger failures (I've only had to warranty one 2600 series M18 hammer drill in the last few years and it was a chip failure).

Surprised the B&D lasted those first 8 minutes

@MachineryNation

Жыл бұрын

😂😂 I shouldn’t laugh but it was rather disappointing

this guy absolutely a bosch user

@MachineryNation

7 ай бұрын

Defo not a Bosch user…. I use Red and Black tools 👍🏼

Black n Decker ain’t what they used to be. I gave up on them years ago. A good idea having a battery platform that can be used on other brands

@MachineryNation

Жыл бұрын

Yeah, it’s been a long time coming so I’m pleased it is coming to something and others are jumping on board 👍🏼

⚠ Bosch is at the advantage of the screws put in by Black + Decker!

But consider the Bosch is about twice the price.

Black&decker use to be a good brand on power tools int their beginning but for some reason they went down hiĺll

@timbert4672

Жыл бұрын

Aye, I remember their hover mowers were insanely powerful and never seemed to break back in the day. I'm told that what happened is B&D started allowing other firms to produce tools under the B&D name and these were of infirior quality to their own products, I'm not sure if this is 100% true but it was told to me when I was eyeing up a portable air conditioner by Black and Decker and got warned away, though based on the reviews I later went and looked at, it would seem there was some truth in what thie person told me.

@santinho212

Жыл бұрын

@@timbert4672 makes sense

@thepewplace1370

Жыл бұрын

Stanley, Black and Decker mega Corp has gutted many old school US brands, including Stanley, Craftsman, Porter Cable, and Black and Decker, dumping all their money and effort into Dewalt, which still falls short in many categories of its main competitors: Milwaukee, Makita, and Flex. It's really annoying, and they prey on homeowners/DIY guys who aren't in the tool world enough to know that these classic US brands have been turned into cheap Chinese junk.

@santinho212

Жыл бұрын

@@thepewplace1370 thank you for your input

Argos UK as a real deal on a Cordless variable speed drill with all extras + a 100 piece bit set for metal and wood, stone, and concrete,And two rechargeable batteries the drill as light for hard to see places, A lot cheaper than the the high end drill costing 3 times as much, At £68 pounds a Bargain The name is Giuld!!! Pass it on !! 😀🇬🇧👍

@JayTheDodo

9 ай бұрын

I don't know if that's such a great deal, as you get what you pay for. Also with the Bosch, that battery system can be used with many different tools e.g. Impact, Jigsaw, MultiTool and so on. If you're a keen DIYer or have a project you want doing, sometimes it's best to not always go for the cheapest deal.

Put it against dewalt

@MachineryNation

Жыл бұрын

They are owned by Black & Decker so probably the same outcome 😂😂😂

@masefarmer6970

Жыл бұрын

Yeah but dewalt are better 🤣

@owenmills3517

Ай бұрын

Not really a fair test, dewalt are a premium brand. These are solely made for DIY

The Black & Decker had the power to screw in the long screws. The Bosh had to be switched. When he switched the Black & Decker the clutch was set to limit the power instead of leaving it on Drill mode as it was when screwing them in. That showed the Black & Decker to be better!

@louisd95714

6 ай бұрын

You are dreaming!

@helenday5031

6 ай бұрын

What on earth is the "clutch" on a drill? I'm afraid I don't understand your explanation?

Both were not designed to drill brick

I mean you could at least compare drills of the same price range, the Bosch cost over double the price of the B&D.

What were u doin with the orange drill mate just give it up. And that bosch is trash look at the angle of the motor.

Don't waste your money on brushed motors. They're old news like really really old news. Brushless are way more powerful and use less power. Also don't waste your money on junk like B&D. Just wait longer and get a Makita, Bosch and co.

Tat and Decker these days. Better off with almost any other brand

I am sorry It is not Inaccurate test Because you are using Milwaukee Drill bits Not the ones that supplied with the actual Drills What is Bosh And Black and Decker

@MachineryNation

Жыл бұрын

None were supplied with either. It is accurate as they are both using the same bit. No matter what we do someone has an issue 😂😂 in other tests when we use the supplied accessories rather than equal tooling, people have moaned, which I agree with. In this test everything was equal 👍🏼 unless I am missing something here?

@DJC995

Жыл бұрын

@@MachineryNationIf Bits had come with the drills they wood of melted on the first hole🤣🤣

He is advertising, it is obvious that he gets paid from Bosch

@MachineryNation

7 ай бұрын

Nope, never been paid by Bosch. They have never even replied to my emails 😂 the Black and Decker was just sh!t 👍🏼

@Grant849

5 ай бұрын

​@@MachineryNationjust like your video, cheers

Must be desperate for views spamming all across reddit lmfao 😂😂

@MachineryNation

Жыл бұрын

“Captain, we’ve caught one. They have come across from Reddit and commented on our video. What shall we do? Throw it back? Feed it to the dogs? Or can I keep him as a pet? Pleeeeaaaasseee….” 😂😂😂

@thepewplace1370

Жыл бұрын

Imagine that: a KZread promoting themselves... What shall we do with them my lord? To the rack? Or the guillotine? Bruh. What a bad take. Of course he's promoting himself. Why shouldn't he? He puts time and effort (and no small amount of his own money) into making them. He wants viewership and success. Why don't you want him to have that?

@Jb305903

Жыл бұрын

@@thepewplace1370 Did mom help you type that all out ?

@thepewplace1370

Жыл бұрын

@@Jb305903 is that supposed to be an insult? 'Mom musta rote dat for ya' What, because I'm not too stupid to use punctuation? Or because it was a series of coherent sentences using reason and logic? Before you bother, this reply took about 30 seconds while I'm shitter browsing.

@Jb305903

Жыл бұрын

@@thepewplace1370 You ok? Seem a little stressed. Maybe go shoot some of those cute guns for stress relief :)

Take the clutch off mate, this video is so frustrating to watch

@MachineryNation

3 ай бұрын

The clutch is not on mate! It was frustrating for me too!

U using b&d slowly ,