Thank you. Because of your joy and enthusiasm for rc crawlers i boughts my trx-4. And this was by far the best decision i made this whole year. Meet Crawler-People, go Crawling, get some fresh air and sun, watch your videos, work on the car...perfect.

@TheNamesArif

3 жыл бұрын

RC crawler doesn't look fun when you watch them but it's a lot more fun when you actually play

I have used several of Boom Racing's products while building my SMT 10, and have been very impressed and pleased with the quality of everything I have used !

@RCReviewChannel

4 жыл бұрын

Quality and attention to detail stood out. It's obvious they take pride in their work.

it would be nice if when you will present some pieces you could give them a closer look

These are absolutely incredible I'm going to need them for my TRX 6 I'm really digging the flat black and bronze that you have

I recently scored some Probuild beadlocks for my SCX10.3, you are definitely right about the quality... Other than maybe cost (the joys of living in Canada, amiright?), I can't imagine a reason to run any other wheels on my rig at this point.

Great review & can't wait to see them. Pre-ordered a set from Asiatees (4 choices you mentioned) but wish they would have offered the full menu of options as on the Boom Racing web site, but that may come eventually.

Wow these are impressive. I ordered aftermarket wheels for my trx4 sport kit last year, waited weeks for them to arrive then realized the included offset wouldn't work with the portals, so had to wait another few weeks for wider hub adapters to arrive.. These wheels would have been perfect

Very cool its on the list for the near future

@RCReviewChannel

4 жыл бұрын

good to hear.

Great video about beadlock rims. I myself still use the classic RC4WD :)

Those are sweet! May have found my new wheels lol. Thanks for the review. Another company you might like is Team KNK wheels. I have a set on my gen 8 they are really nice quality aluminum and, easy to use. Aswell,they come with some options to widen them and, hub spacers.

U can also try their Hustler tires..value for money with dual stage foams included..

I've been waiting on these Dee. Just a little bit of past experience...you always want the front wider not the rear. You can steer the front through an obstacle not the rear...plus , if you're "comping" it's easier to get a narrower rear end through a gate than a fat one.

@discusdog

4 жыл бұрын

The problem with uneven offsets comes like as you said gates and when tire placement is critical you have to really know the truck to get the wider rear to track where you want it to.Like pulling a trailer a little bit

Great job

Might have to check these out. They'd be cool on a drift car!

@RCReviewChannel

4 жыл бұрын

Oh for sure. That deep dish on a Skyline GTR would work.

Ugggh. I just spent 100$ on beadlocks ... These look soo good . color and all. And the offset thing is a game changer

@RCReviewChannel

4 жыл бұрын

I know! Next time. Even the tools they supply are next level.

Any suggestion on what hub to order I see you can get hub seats we custom building these anywhere from 1.5 mm all the way to more than 6 mm probably going to put them on a Capra

I'm not sure why everyone likes vanquish wheels, I just got my first set not long ago and it's the only wheel brand I've had that doesn't hold a tire. I guess they look nice. These look worth trying, I like the custom build thing they have, I checked out the site.

Anyone know if the hub bolt pattern (xt6) is compatible with slw hubs?

Can you put 1.9 brass interal counterweight on the hex hub adopter??? Since it is 6 holes.. 🤔

Sleeping on boomracing. Should look into the bxr01. Thanks for this. Been waiting to see these wheels

@RCReviewChannel

4 жыл бұрын

That is coming!! We couldn't afford it before and it wasn't in our crawler performance sweet spot. But we've done a few scalers now and that can rightfully join the squad.

@brianmoreno3

4 жыл бұрын

RC Review yeah! Its quite pricey. Glad you guys are doing good and can’t wait to see it on here.

How about the other wheels they offer like the Kraits?

Hi does anyone know which beadlocks fit a Traxxas Slash?

Can someone please help sort something out, I have an axial 6x6 with the stock mw19 Beadlock tires and I have trx4 bronco canyon trail tires also. I’m wondering which I should seal/unvent for trails/water and which I should keep vented for max crawling and dry runs. I know nothing about beadlocks

What wheels do you recommend for the beach. I don't want to spend 100 then end up having to buy new hardware for the wheels because they started to rust on the 3rd day of vacation. Currently running Injoras we'll see how they hold up.

Pretty damn innovative. 👍👍

@RCReviewChannel

4 жыл бұрын

innovative, slick and looks good. A rare combo.

Which color did you have on the beadlocks in the video(on the face plate)? was it Bronze?

There solid wheels 👌🏼🇬🇺

MST did this on Drift wheels its adjustable offset depending on notch you set the face of wheel on. Nice review beats having to buy Hex and SLW Hubs to manage offsets.

@RCReviewChannel

4 жыл бұрын

Thanks for the info! Good concept.

Fab video, quick question, which is the widest tyres (width) available for a 1/10 scale crawler, when compared to traxxas canyon trails? And then for those which would be the appropriate boom racing pro build wheel set ?

Pre-order only. C'mon what a tease

Some air fesh in the crawler theme 👏... Nice review 👍

@RCReviewChannel

4 жыл бұрын

So fresh! Cool to see innovation and manufacturing prowess merge.

That's pretty cool

@RCReviewChannel

4 жыл бұрын

Gotta give props to innovation

If you make the rear slightly narrower than the front, it will give tighter steering. It's an old school rock crawler trick

@RCReviewChannel

4 жыл бұрын

Really cool to know.

@bugman72

4 жыл бұрын

You are correct, @Chainsaw. In true comp crawling, you want the rear axle to be narrower than the front. Increases steering and makes passing through the gates at a comp easier. With the rear axle narrowed, you have more room between markers and allows transition between gates easier (sometimes :))

How many beadlock screws on each wheel please?

Very Interesting

Do you know if these will these clear the capra axles with aftermarket brass weights? Thanx

@JasonTsang9

3 жыл бұрын

The inner wheel clearance is 45mm (1.771"). You can measure your weights and see if the diameter is smaller than the inner clearance.

Which country is the anchor from?

Beeftubes has had an adjustable backspaced wheels out for almost a yr now. Also has brass pieces for extra weight. Beef hooves are the name of the wheels

@salloroc20

4 жыл бұрын

They're also over double the price...

not familiar with official rules in the crawling world, but in big crawling competitions don't they have rules on standard measurements of offset of wheels and hubs?

you could be an instructor in the hobby Sir very easy to understand all your videos same way thank you

Just got mine today. I kept trying to screw the back ring in with everything else. I tried for an hour until I figured it out 😂😂😂

@JasonTsang9

3 жыл бұрын

Remember to use the pilot screws, that is a big shortcut!

Great looking rim but does it fit on the new vanquish ultra I’ve been having trouble finding rims that fit

@RCReviewChannel

4 жыл бұрын

Yes, they will fit as far as I know. They fit the Capar and SCX10 III with room to spare and they have the biggest portals around.

@lolarice1860

4 жыл бұрын

RC Review but the larger axle size and funny hex shape fit up is my worry

@RCReviewChannel

4 жыл бұрын

Yes, all portal axles are problematic. But these have a massive inner cavity, like Vanquish. most beadlocks don't work since the deadlock ring is in the way.

Hey would love see another servo test based on 25-50 dollars

Man, I want a set not these but the ordering options on the website are overwhelming

I have a boom racing D90 chassis that's is awesome quality

@RCReviewChannel

4 жыл бұрын

Great to hear. It seems that is a serious company when it comes to quality.

Cool review sent email again jimsienna I was also looking at gear head beadlocks thanks jim

Josh from vanquish is going to black ball you for saying the best wheels lol. Ya all good though I love boom racing they always done right for me and my crew

@RCReviewChannel

4 жыл бұрын

hee, he.. :) I meant the best wheel 'package' or sumptin. Love my bronze Vanquish. Just realized though they're $170 for four.

@erchompnurse

4 жыл бұрын

I have several sets of vanquish and they are great. I’ll see ya at linda vista soon👍🏼

A great wheel, can I get them in the uk. They look the absolute best wheel on the planet,😀

@RCReviewChannel

4 жыл бұрын

Yes, UK for sure. They specialize in shipping all over the world.

To much negative offset should increase bearing wear. Cool adjustment ability just be careful

@RCReviewChannel

4 жыл бұрын

great call. More stress on faster vehicles as well.

You should try out the beeftubes.com wheels

@salloroc20

4 жыл бұрын

At over double the price though... Spending almost the cost of a kit (Enduro) on just wheels seems a bit... Nutty.

385 million ROFL.. I paused and thinking WHAT, impossible.

NICE 🤙🤙🤙🤙🤙🤙🤙🤙🤙🤙🤙🤙

Confusing?

This doesn’t apply to the video but can we get a bike check i know your mountain bike from your vids

@RCReviewChannel

4 жыл бұрын

Oh man, don't get me started. Dozens here at the house.

@scotishboy4203

4 жыл бұрын

RC Review sick

This is rediculous these are exact same rims i got off amazon for 29 for all 4.

@Ck91143

3 жыл бұрын

I call bs on that

@wiccanfpv

3 жыл бұрын

You got the right to but others in the world that bought them about 5 months back thats what we paid,and mirror image

No to china