Damn I've been wondering this exact question for a bit. I'm not sure I can afford to watch this video.

@jasonrad9332

7 ай бұрын

Only gets worse as you get into long range🤣🤣🤣

@nunyabeeswax2575

7 ай бұрын

The struggle is real braten.

@jerrychambers7267

7 ай бұрын

I was just thinking the exact same thing

@jerrychambers7267

7 ай бұрын

How about a 22 arc barrel ?

@joelpreisser2527

6 ай бұрын

Hahaha.. I know exactly what you mean...lol

Dang it, Caleb. This is EXACTLY the video series I did not need to see. Lol. I've been fighting off the urge to build a nice bolt action rifle. I guess there's no fighting it now.

The aftermarket for the 700 is really something. It truly is the small block chevy of rifles.

Yes! This is Exactly a series I need!

Nice Caleb. Holy cow, all those stocks are awesome. I am looking forward to the build

Awesome. Looking real forward to this series. Solus looks real nice.

Great video thank you. I am going to start a build for a bolt action and this is great timing.

The accurate AR series and now this are super helpful

The Savage barrel nut system makes it super easy to put together an amazingly accurate rifle, without having to take it to a gunsmith for chambering and installation. With a set of go/no go gauges, I got a Savage pre-fit from Shilen, and put it on a Savage 110 tactical action, in 6mm creedmoor. Shoots lights out!! 115 grain DTAC’s with H4350 can stack shot after shot right on top of each other!

Great video....well done Brownells

Looking forward to this series. Built my first Remage a couple years ago. Been looking at that Solus for awhile. Want to see what mistakes I made the first time.

Just a quick note about the Proof Pre-Fit barrels. Proof research guarantees the head spacing of their barrels to the action. The only thing they don’t guarantee is where the caliber etching will end up but in my experience they are always close.

@davidwarren3433

3 ай бұрын

There are several barrel makers that guarantees the headspacing of their barrels to custom actions nowdays. I have a CarbonSix Carbon fiber barrel in 6.5PRC on order right now and they Guarantee .5 inch MOA w/ load development of their barrels. Other barrel makers are getting the action info from the custom action makers and getting the headspace near perfect for custom builds.

Do yall read my mind? I was just looking at most of these parts. I'm looking forward to future videos.

Have been using the triggertech primary in my creedmoor and switch to the diamond and all I can say it’s far superior and well worth the pricetag

i just got a proof 6gt prefit on my solus action and it headspaced perfect.

@brownells

7 ай бұрын

Most of the time they do!

Finally, people are applying AR15 concepts to other weapon types.

Great Stuff '' 💯💥💥💥💥💥💥💥

Im here for the AT4 is the safe!

Will y’all be including a parts list?

The amount of interchangeability and adjustability appears amazing! Is there a way to do a video showing how/if the tolerance stack-up between parts compares to an action like a factory Remington or Savage action and a precision action like a Stiller, PT&G, or BAT?

Looks like fun but I will need to win the lottery to afford this one.

How refreshing to see a video with such a clean-cut young man. Without going back through all three videos (about 1.5hrs total), will you provide a build list of all the components for this build with prices (as-built)? Also, a list of the specialty tools you used and their prices. It may be above my pay grade, but I won't know unless I ask. Thanks for doing a great on all your videos.

Caleb is like a kid in a candy store with this stuff. LOL

@SoloRenegade

7 ай бұрын

so are we. he's exactly the kind of person needed to share such stuff with others.

dig it

I wish the CC matched what was being said. Good info though. I wish Aero would introduce a left handed version. I would have one in my collection if so.

Proof is making a pre-fit specifically for this action now

does anyone have a suggestion for a light weight and inexpensive 308 or 6.5 creed barrel for the solus?

Yippy’ another 6.5cm build 🥱 I’ll wait for the long action to be available so I can disassociate myself from the 6.5’er vs 308’er hater groups. Seems like a waste of money to build a 5k short action that will barely outperform a ruger american or savage axis build. Juss sayin……

Of all the stocks that you mentioned, are they all compatible with the barrel, nut and trigger hanger? Or do some need to be modified?

I would use a Boyd’s stock I love a thumb hole laminate stock

Do the actions come in true LH config?

I need all the pointers I can get, I have a Remington 700 LA 300WM, and trigger assembly. Now I need an accurate medium contour barrel and a good stock to finish the build. I absolutely refuse to use the heavy barrel it came with, it’s ridiculously heavy.

Can’t you shim a barrel that won’t close on the go gauge or does that destroy accuracy?

I like the kit, but I will have somebody else put together. I am not good at that. Thank you for the info I’ll find out more about it.

@SoloRenegade

7 ай бұрын

it really is very easy to assemble AR15, and firearms like this one. once you do it once, you'll kick yourself over not having done it sooner (aside from the cost aspects of course). I highly recommend giving it a try with firearms like these. They're very easy to build.

Is the Solus a standard action or has it been built with accuracy in mind?

This might be a dumb question, but I'm also a new lurker. Is there anywhere I would have to go to get newly made parts for k31? I don't want to mess with historical pieces. So, if possible, I'd rather try and have a whole new one made with more modern parts.

You know what I think I'll just buy a bolt gun lol I was considering building

It really sucks that Aero doesn’t offer a long action magnum action. I want to build a 7mmPRC

I'd want a "pre-64" Winchester action, or something very much like it! I've got enough "push-feed" guns already 😢

Provide a parts list!!!!!

6 months ago I was going thru forums trying to learn how to build a light weight precision rifle. I was doing my head in with the amount of information I was getting. This video is a blessing and has gotten me back on track into building a long range 6.5 creed. Thank you guys!!!

Im trying to figure out what action i can use for a .300 blackout build

@tripleog9557

5 ай бұрын

Me too brother… any finds yet or info u could pass along would be very helpful… thanks

When you buy a serialized action or lower, are they already designated as a pistol or rifle. I'm asking because I'm considering a bolt action pistol build.

@tonypimm8940

4 ай бұрын

Receivers are neither rifle or handgun, they are ‘Other’ and the caliber is listed as ‘Multi’, as they could potentially be chambered in virtually any caliber.

I thought the reason for the no-go gauge is to make sure the bolt doesn't close on it, otherwise the chamber would be worn out, or the barrel isn't made right.

@CalebSavant

7 ай бұрын

You'll see in the next video, it's important regardless, especially with savage style barrels.

@rossfudd256

6 ай бұрын

I agree he mixed himself up on that bit. Go gauge bolt closes, No-Go the bolt doesn't close. He corrected himself in the next video.

AICS REM. 700 stock?

“Left hand” Aero Precision Solus Actions! #AeroPrecisionSolus #Lefthand

Terminus Zeus, trigger tech diamond, mpa matrix chassis, and a custom heavy contour barrel… .2 or less at 100.

One of the longest videos. And, just in time for holiday shopping.

6mm Creedmoor?

Sweet, this is the next thing I wanted to do while I wait for the "assault weapons🤣🤣" ban to be ruled UC in Washington.

Any chance of running a 7prc through the solus?

@bartrice8278

7 ай бұрын

Not currently. The 7 PRC requires a long action and the Solus is offered only in a short action as of right now.

@SoloRenegade

7 ай бұрын

@@bartrice8278 hopefully they offer long actions soon. I really want to build such a rifle in some larger calibers. Already have rifles in 6.5 and .308.

Can i get open box discounts on those? Lol

So Solus will work in an MDT Chassis??🤔🤔🤔

@SuckItYouTube19

7 ай бұрын

😂😂😂I jumped the gun. 😂😂😂

Seems a majority of the actions out there are short action. Makes it tough for those of us who want long action.

As a heads up, the closed captioning is out of sync. For example, while the video shows triggers, the text is talking about optics and mounts

It’s so unbelievably frustrating that there are no affordable rifle actions available. It’s cheaper to buy a Remington 700, savage, or Howa and get a custom barrel, that it is to just buy an action.

Wouldn't be soul less if you painted it? My .02

As gas operated guns are continually under attack, it may not be a bad idea to own a bolt gun.

@SoloRenegade

7 ай бұрын

Bolt guns are gas operate too. Gasses push the bullet out the end of the barrel.

Am i the onlyone who noticed the at4 in the safe 😂

As a “built not bought” type of guy, its depressing to see the price of the action and bolt. 900 chucks, if it was 5 or 6 I’d be all over it already, 700 I’d think about it, anything over that just doesn’t make sense. It will be cheaper and better value to just buy the rifle from aero then do what you need to do it..

With out any Brownell links this video is a bit useless. Finding parts about the build on their web site sucks and since your selling Brownells and we know it give us all a break and provide quick links to help buy the parts.

@brownells

Ай бұрын

Sorry to hear that! We cannot post links to products as it violates the KZread guidelines.

You are assembling a rifle not building one.

@brownells

7 ай бұрын

Build and assemble are synonyms. The more ya know!

@gilangus2453

7 ай бұрын

@@brownells no build means you machine all the parts yourself.

@Whispertactical

3 ай бұрын

@@gilangus2453a machinist produces the parts needed for a “build” by machining the parts you need to a particular spec….once you receive all the machined and finished parts, you can build the final product in which the parts were machined for….your acting like no one builds anything because they didn’t do it the process from start to finish…..if I built a deck would you actually argue that I didn’t build it because I didn’t cut the trees and turn the logs and cut the lumber….

@Whispertactical

3 ай бұрын

@@brownellsI sometimes question the mental capacity that some gun owners have and wonder if their capable of safely operating their firearms without earning a Darwin Award

1k dollar part there, not for regular working people, just my .02

@Chato4570

7 ай бұрын

What are you referring to?

@it_is_what_it_is_brotha

7 ай бұрын

​@Chato4570 its a $900 action, chassis that average $1500, $1,000 barrells, triggers running $300 to $500, not including accessories and scopes yet so your watching a $5,000 rifle build for the home do it yourselfer who would prefer to say they "built" their own rifle. You can buy a complete Aero Precision Solus rifle for 2000 to 2500

@chipsterb4946

7 ай бұрын

⁠​⁠​⁠​⁠​⁠@@it_is_what_it_is_brothaexaggerate much? The receiver is $800 - at the low end for what it is. You can buy a barreled action for $1,100 and a complete rifle for $2,000. You could spend $850-900 on a Proof Research carbon fiber barrel, but also can get a Remage Criterion barrel for $350-ish. Can you buy a Ruger American for less than the AP action? Yes. Heck I recently got a Ruger M77 Hawkeye for less and that’s a darn good rifle. A lightly used Winchester Model 70 might cost $1,300, so you’re not doing this to save money.

@jameshill5304

7 ай бұрын

If you bought the solus during their 30% off sale you could’ve got it for 1500 like I did . That was just 2 weeks ago

@randymagnum143

7 ай бұрын

Then buy a Savage Axis or Ruger American. They'll do 90% for 25% of the money. But others enjoy having nice things.

Small action? Booooo

StrangleholdoutdoorS