No video
Body work and Monstaliner | Jeep CJ7 Build Part 12
In this video, now that the body has been taken off the frame as well as soda blasted, we begin the long and painful stage of any restoration....body work. In this video we replace the rear quarter panel as well some miscellaneous rust sections on our Jeep CJ. After metal work, we apply bondo to any trouble areas or rough areas on the body, including the dash. After bondo, we apply black monstaliner and magnet paints primer to the undercarriage, floor, fenders, and engine bay. Once the interior was monstalined we finished the bondo in preparation for the body to be put back on the the powder coated frame.
Пікірлер: 44
Grinder and paint makes the welder you ain’t. Good job boys
Eye protection, ear protection and gloves! Your 50 year old self will thank me.
@jaywildhorsepatterson4432
5 жыл бұрын
Huh what ? Ahhh .lol 47 here lol wish I knew what I know now . Remember air chisels .
@3stacks_rt
Ай бұрын
HOW DARE YOU DISRESPECT THE SAFETY SQUINT?!?!?! 😂
Good job
Monstaliner the out side too I did with mine looks good! No worries about scratches !
Those little squishy earplugs work GREAT for plugging the holes (threaded or not) throughout a vehicle's body.
Really cool vid guys. Awesome project!
Cheap safety glasses will make sure you still have two good eyes
Good work guys one suggestion would be if you are doing the dash again I would use the fibreglass filler with a skim of bondo over it
Im going to call the safty squad on ya no safty glasses with a 4.5 grinder had to many blades blow up in my face be safe
"its a jeep and Im probably gonna slam it into a tree anyway" that made me laugh so hard...
@BuildBreakRepeat
6 жыл бұрын
Connor Guldner yeah, so far the trail damage is at a minimum lol.
When welding sheet metal. Just use short spot welds. Not to get the metal too hot to keep it from warping
My CJ' had damage on the same rear corner too. Ended up having to replace the side panel too.
Safety First!!
Awesome job. Do you know how many people think they're going to do a project like this and then never complete it?
AMIGO LA SEGURIDA PRIMERO EN EL TRABAJO ES POR TU SEGURIDA LENTES O GAFAS GUANTES Y TRABAJANDO SE OBTIENE LA ESPERIENCIA ME GUSTA SU TRABAJO SALUDOS DE CARACAS VENUZUELA
That was alote of bond a lol looking good
Did you guys use anything to neutralize the soda before paint/primer ?
The reason your metal is warping so bad when you weld, is because you have to spot weld it together because the metal is too thin. You have to spot weld it, let it cool, spot weld again, let it cool, and so on and so forth until its complete. That's why your right rear quarter warped so bad and why your dash panel warped so bad as well. Also, you didn't have to do all of that to your dash panel. All you had to do is go to someone with a laser cutter and have them make you a new one. lol
You could use poly primer and not use bondoooooo.
Between the chassis and the body shell can heavy duty springs be placed? Keeping the screw/ bolt long?
Did I miss something? Why didnt you line up the body line first before welding?
I realize this is an older video, but I hope you've learned how to apply "bondo" by now. You are applying too much and it isn't going on smooth. Save yourselves hours of sanding by applying the filler in thinner amounts and smooth it before it starts to set up. It will same tons of time. JMHO
Did you make a bigger hole for the bigger heater fan?
Hey guys, nice job. I'm installing an aluminum tub on my CJ, but the tub comes with no holes in the firewall. Any chance you would have a template of the firewall holes? Thanks.
I’m willing to bet there wouldn’t be top and bottom gaps if the panel wasn’t placed a quarter inch low.
Why not just make new dash panel out of sheet metal?
@jimt.9227
5 жыл бұрын
Yeah, you guys destroyed a perfectly good CJ dash that you could have sold for a chunk of change and easily fabbed a new dash custom to your liking easier than all that Bondo work.
That’s silicon bronze welds
Jeeps looking good. do you guys still have the clock and tach? would you sell them if they still work?
@BuildBreakRepeat
7 жыл бұрын
Ben Mann I would but neither of them worked lol.
hello, can you please tell what difference does the monsta liner makes , with respect to the conventional primer and paint process. restoring my own Willy's so it would help a lot.
@BuildBreakRepeat
6 жыл бұрын
Pulkit Channan I would monstaline before primer and paint because it’s easier to mask of the monster liner than to mask of the paint.
@PulkitChannan
6 жыл бұрын
Build Break Repeat okk, thank you so much.
The mystery metal is brazed
Those ribs and beads are not body lines...they're not for looks...how about strength because a flat piece of sheet metal can flex very easily
some love = pound it with a hammer....
how old are you guyd
@BuildBreakRepeat
6 жыл бұрын
Foreman 450 We’re like 17-18
Way to much use of bondo
Terrible