Looks like one heck of a setup! Nothing like prepping the land for yourself to work again. Making profits!

@sticksfencing3312

Жыл бұрын

We are pleased with it this far.

You need a backup cam! I bought one off of Amazon that is wireless; the monitor uses the cig lighter. It’s a game changer for mulching in the T770. I can backdrag all day.

@sticksfencing3312

6 ай бұрын

The t86 has one from factory. I forget to use it sometimes

Sweet setup dude. Great video too! I'll be following along to see what adventures you get up to with it

@sticksfencing3312

Жыл бұрын

Thank you we are excited to see what we will get into with this machine

Where did you get covering for lines that run outside of machine?

Are you always running the mulch head in super flow? And what do the hydraulic fluid temps level off at when working? Thanks I’m real close to pulling the trigger on a T86 myself.

@sticksfencing3312

5 ай бұрын

the T86 runs at normal temp on hydraulics. hot or cold weather. 8 hour days.

@TheOMEGANOX

5 ай бұрын

@@sticksfencing3312 have you done anything to your case drain system to run the mulching head or is yours just stock?

@sticksfencing3312

5 ай бұрын

@@TheOMEGANOX The t86 is stock you dont have to do anything to the machine to run in super flow.

Nice machine, have you had any issues what so ever with hydraulic or engine temps getting high? What kind of climate are you using that machine In when your mulching?

@sticksfencing3312

Жыл бұрын

None at all. We operate in high humidity conditions temperatures in the 90s. The cooler on the machine is massive and reverses the fan very often to blow dust off

@TheOMEGANOX

Жыл бұрын

I’ve been working with my bobcat dealer they want a whole pile of money for the T86, even the lease rates are ☝🏼☝🏼☝🏼

Be careful raising the head up it will sling debris back into your shield and break ur front glass.

@randyhouse8223

10 ай бұрын

That's a fact. I have the 770 with the forestry package and without that cab and glass in it, i honestly would be dead. Several times....you never see it, only hear it smack off the glass. well worth the money. And that windshield wiper isn't gonna last long. Looking to upgrade to the T86. Hydraulics, cooling system, and improved vision are plusses.

@hutsuck

9 ай бұрын

I have the 3/4” lexan on my t770 mulcher. If you rock the mulching head all the way back it won’t shower the cab with debris but I can’t imagine mulching without the forestry package. Not worth dying over.

@sticksfencing3312

6 ай бұрын

Yes it can depending on angle. We have bulletproof glass installed that is an inch thick.

Is that the bobcat mulching head?

How many litres p/min with the hydrolics - high flow ? - Thank you

@sticksfencing3312

Жыл бұрын

42 GPM

@pearllllllll

Жыл бұрын

@@sticksfencing3312 That's pretty good = 158 litres p/min - that's a lot of pump - do they have a good hydrolic cooling system ?

@sticksfencing3312

Жыл бұрын

@@pearllllllll yes the cooler is massive and have had no issues so far with overheating.

Do you charge per hour or job for this? May we know how much you charge? This is their biggest machine and those teeth aren’t cheap as you know. Thanks would love to know.

Whats the outcome against rocks?

@sticksfencing3312

5 ай бұрын

with the carbide teeth i have not seen any effect to hitting rock.

What do you charge per hour for your mulching services?

@ChaseLandMgmt

10 ай бұрын

if you're not at $200 an hour or more, you're losing money in my neck of the woods. Lots of maintenance cost in this line of work.

@doon44

10 ай бұрын

@@ChaseLandMgmt Thank you Sir!

@ChaseLandMgmt

10 ай бұрын

@@doon44 you bet. I see too many guys getting into it charging brush hog rates. This is a whole new animal. A set of knives last 100ish hours in rocky soil, at roughly 1000 a set. Carbides will last quite a bit longer but it’s harder on the machine and doesn’t leave half of nice as a finish. All about what your customers want.

@doon44

9 ай бұрын

@@ChaseLandMgmt Thank you for your time. I’m on my way to retirement in the next few years and would like to get into something totally different. I love doing this kind of work and thought it would be fun to do while making a few extra dollars. The price of the machines and parts as you have explained is a big investment. Would you mind if I reached out later if I have more questions. I know time is precious and do not want to take up to much of it.

@ChaseLandMgmt

6 ай бұрын

@@doon44 just seeing this. Please feel free to reach out.