BMW X5 E70 lift-gate/ tailgate power strut (lift support) motor replacement.
Автокөліктер мен көлік құралдары
Replacing a liftgate/tailgate power strut (lift support) motor on a BMW X5 E70. #bmw #bmwx5 #bmwe70 #713jtmechanic #mechanic #wrenching
Link:
www.fcpeuro.com/BMW-parts/X5/...
Пікірлер: 32
Dude! You ROCK! The Nylon Strap to feed the Wiring was Genius!! Thanks so much for posting this. You're a Life Saver Brutta'!! 😎🤙
@713jtmechanic8
27 күн бұрын
@@TikiJimtheDrummer thank you for your kind comments. Happy my video helped you. 😊👍
Thank you so much. Im going to have to perform this job myself.. god bless!! 🙏
Great way to thread the wiring through, thank you!
Exactement comme la vidéo j’ai changé mais deux vérin électrique en 1h exactement alors que chez Bmw il voulait me facturé 2 heures de main d’œuvre , grâce à vous j’ai gagné de l’argent 👍 Merci beaucoup 😊 💪💪 Continuez comme ça 👍
This is your student Anthony, great video!! I’ll be keeping in touch.
@713jtmechanic8
Жыл бұрын
Anthony, congratulations on graduating! You are driven to become a better vision everyday. The combination of your drive and positive attitude will take you great places. 😊👍
Thanks for the easy to follow video. So many show a video saying for this year model and it's totally for a complete different vehicle. 👍
@713jtmechanic8
Жыл бұрын
Thank you for the positive feedback. 👍😊
Brilliant video. Thank you, sir, keep up the great work!
@713jtmechanic8
Жыл бұрын
Thank you for the positive feedback. 😊👍
Thanks so much for the help brother
Thank you very much in germany is no Video how to change This.
@713jtmechanic8
Жыл бұрын
Excellent! I am happy the video helped you. 😊
Great video! Did you have to do any coding? I have read you have to program the upper and lower limits of the lift motor when replacing it.
@713jtmechanic8
9 ай бұрын
Not on the E70 X5 or older model.
Where are you located?
Question, does the left gate have two power struts or just uses one power strut on the right side?
@713jtmechanic8
2 ай бұрын
One power strut for each side.
@fastgoturbo
2 ай бұрын
@@713jtmechanic8 Thank you
Hi quick question, I replace both of my car but doesn’t work One Clío is broker please let know thanks
@713jtmechanic8
Жыл бұрын
One Clio is broken? Not understanding. If you replaced both, it may have module problem
Is the strut on the left-hand side the same? I have an indy telling me the left-hand strut is $600!?!?! + an hour labor to install
@713jtmechanic8
9 ай бұрын
Yes, I paid 565 for one strut.
@713jtmechanic8
9 ай бұрын
It’s the same procedure to replace left side
My tailgate won't even open. One side is completely jammed. Any idea what i can do
@713jtmechanic8
10 ай бұрын
The reason the original lift motor support broke in half was due to seizing. (Jammed). The lift motors go bad when vehicle is about 100,000 miles. You may have to force it open regarding tailgate by hand. If you are going to keep bmw x5 for a long time. I suggest to buy lift motor support from FCP euro. It’s lifetime warranty. It’s. About 585.00 for each one.
@ziafortube
10 ай бұрын
Yes my car is just over 100,000 and it's a 5 series GT. I can force it open to be able to see the jammed strut. Was thinking might be able to take it off while holding the tailgate in that position
@713jtmechanic8
10 ай бұрын
@@ziafortube yes. Make sure to use something keep tailgate in the open position while you remove lift motor support. Be careful and make sure to secure the tailgate in the open position. The tailgate is very heavy.
@graffo7744
7 ай бұрын
Mine is also jammed. I can just barely get it open a few inches. I’m hoping I can pop the tailgate side off so I don’t have to break it. FCP euro it is.
When the lift unit was out, did it off set the tailgate and make it very hard to secure in the close position???
@713jtmechanic8
9 ай бұрын
Good question. In my case, it did not affect the offset the tailgate. However, there are two rubber stops or grommet where the tailgate mates onto the sides near taillights that can go out of adjustment due to wear or movement. This can definitely cause issues in the closing position. It’s rare that the rubber stops go out of adjustment.