hello guys i have BMW Scanner 1.4 without DME-live data,how i can unlock this icon.Thanks:)
@caboainc.44772 жыл бұрын
reason to encode closing windows remotely and no change?
@dickofdeath906 жыл бұрын
Hi, I just coded my alarm but nothing is happening, not even optical signals, i have a e46 320d
@carlosberdeallopez17623 жыл бұрын
Hello, I was changing zke because of a breakdown, and now my car won't start.
@Linoge2797 жыл бұрын
hi how do I re-code a use cluster which display "CodE" at the mileage interval? I replace the the eeprom of the used cluster with my original one hoping that I don't need to re code it but it was not as expected. How do I proceed with the PA soft to make it works?
@adrianroman71915 жыл бұрын
Hi, do you know where can I find a user manual where all functions are described? Thanks a lot!
@adrianroman7191
5 жыл бұрын
@@catahaThanks a lot, I'll try to do it if I get deep enough in it :)
@isrealperez90696 жыл бұрын
What what computer are you using are you using OS X P and which is the best 32 or 64 so I can buy a used one and place it in the computer
@Habbasio8 жыл бұрын
hi sir i am been watching yours great vedio.only one think i need help what is eeprom and what it does in compouter.lot times i buy tool from china they says modify EEPROM. TO MAKE KEY PLS PLS CAN YOU TELL ME WHAT THAT MEIN.MODIFY HOW CAN BE DONE?I KNOW THIS (Q) IS SILY BUT I WANT LEARN.MAY YOU CAN HELP ME WITH THIS? MATTER
@napper14967 жыл бұрын
on my e46 i get p1640 eeprom error code.checksum drifty. I s it possible to rewrite eeprom with data from another e46 ecu? do you have this data ?
@ggd29496 жыл бұрын
Hi, I also bmwscanner by cons I can not go in the menu "Livedata" is gray and therefore not accessible. I have a 320d DDE-3.0 and a 330d DDE4.0. I solder pins 7 and 8 because I had an error message "error connection with IKE" but thanks to the welding of 7-8 the software works perfectly. Should you weld other pine together to access the "livedata" ?? Thank you Merci, tu peux me répondre en anglais je ferais la traduction merci
@loopster404 жыл бұрын
Can you program a use abs module to a 2007 BMW 328i?
@Arturs.B7 жыл бұрын
How can I read dealership history ? I forgot. :(
@Ali-uv3dz8 жыл бұрын
looks like better than inpa right ?
@hvcool7 жыл бұрын
what section will be the emmissions or transmission issue codes be?
@coolinny4 жыл бұрын
WHY IS IT SO HARD TO DOWNLOAD P.A. SOFT? WHERE CAN I DOWNLOAD IT WITH OUT ANY PROBLEMS
@JPml_cz7 жыл бұрын
How to install driver for BMW Scanner 1.4.0 on Windows 10 (64bit): kzread.info/dash/bejne/lI6Ays6fdNDTn8o.html
@xinxiali42695 жыл бұрын
hello, no recoding IKE the Bmw M3-e46???
@alexp.31025 жыл бұрын
Are you able to code the speedometer from US to EU with this tool?
@Robert.3Coupe4 жыл бұрын
How did u enabled live data in dme ?
@cristi99918 жыл бұрын
Hello, I search your channel for help.I have a BMW scanner 1.4 interface but i cant find my software installation CD.The one i can download from the official site is just a DEMO Version of it.Can you help me and send me software?
@Andre_M_3D8 жыл бұрын
hi. I have a 2004 bmw 320i. I just purchased an uncut key with the security chip in it however from what i was told even if i have a locksmith cut me a key the car will not start as the key is not programmed to the car(anti-theft) My keyfob that came with the car is in bad shape and i tried replacing the battery and had no luck. BMW wants way to much for a new keyfob so i purchased one online. The retailer told me the only thing i had to do was get it cut and then have BMW ensure the anti theft chip is coded to the car. Issue is ..that BMW want to make money and want to sell you a key for 300$...Would this programmer allow me to program the car to my new key? I know how to program the key to unlock lock doors etc..but i am referring to the anti theft portion of the key that has a chip that only works with the car it is paired to. So will this BMW scanner allow me to pair the key and avoid going to BMW ? Hope i explained it properly so you can understand my issue at hand. Thanks
@Andre_M_3D
8 жыл бұрын
+CATAHA Thanks man. I will probably bring the blank key to a locksmith to have it cut however once its cut from what i understood i could only open doors with key or us keyfob to open and lock doors(once programmed that is) But could not actually start the car as the EWS is not programmed to new key. I wonder if BMW can do it at their shops or am i out of luck. I am not looking to purchase programmer etc just to program once key as it would probably be cheaper to go to BMW and buy a new pre cut key at he end of the day. I do believe i understood your reply. Have you even heard of a locksmith that can program EWS to key or if the dealership will even do it with an aftermarket keyfob bought off ebay? lol. I may have just wasted my money.
@Andre_M_3D
8 жыл бұрын
+CATAHA wow. Than i do believe i wasted my money on the ebay key. I am in way over my head. I managed to fix the original keyfob by putting new VL2020 battery however case would close properly so i tried removing and trying again and broke the leads off the battery and the ones on the oroginal were useless and impossible to remove....so I ordered a few from different vendors in the hopes the leads will be in the correct position on battery and I will then be able to solder back in and close key. last battery had weird leads that ended up putting the battery way to high hence not being able to close the key so I gave up after trying to bend then enough to move battery to correct position and they broke. SO hopefully i did not ruin anything when messing around the first time around. I also purchased better soldering equipment including a pump to remove all the excess solder etc and some flux and better solder as well. I knew the ebay key was too good to be true for 40$. They promised all i had to do was get key cut at locksmith and do the old put in ignition turn off and on 5 times hold button down and then middle button 3 times crap and I would be able to use this key to open doors and drive. They neglected to tell me because of the anti theft system the key is not recognized and about the only thing it will be good for is opening doors...lol. Oh well. I learned my lesson. I live in New Brunswick Canada and doubt anyone around here would have the equipment or knowledge to program the blank ebay key for me. SO i may not have any choice but to pay the stupid amount of money BMW wants for a new keyfob. Thanks again for your help and clarification. I had a feeling it was not going to be so easy..cheers
@Andre_M_3D
8 жыл бұрын
+CATAHA oh really ...wish i had one of those guys close buy...lol. I have heard rumors of a guy who could cut BMW keys about 30 minutes away from where i live but have had no luck finding his name etc. I will keep trying. For now I am just waiting for the few VL2020's to arrive so i can attempt to replace battery again and close the case and pray i am able to program to car again. It actually worked last time but the bloody thing was in the wrong spot. So i am hopeful that i did not short anything out etc. I can still start the car but just not use the keyfob to lock or unlock at this point. So fingers crossed i am able to solder the new battery when it arrives and program and be done with this for now. Been slowly bringing a 2004 320i back to life. I got a good deal on it...body was in real good shape with basically one little rust buble and that's it...I replaced every thing you can imagine to make sure i had a good reliable car for a summer toy.New OEM fuel pump, new filter, new Bosch ignition coils, replaced valve cover gasket, just purchased new water pump with metal impeller as i heard they put garbage pumps from the factory with plastic impeller.. I also put fresh oil in her and have a few minor electrical issues to fix then I am done. I love the car and so far ended up not spending very much in the big picture so as long as i can actually use the key to start the car it's will have to do for now...lol. It's parked for winter at the moment so I am just doing as much research as possible until i can start working on it again. I purchased it as a Christmas gift to myself...lol. And my father always loved BMW's and could never afford one so as he is battling a few health issues I kind of wanted to surprise him with this and hopefully go on a few road trips before i loose him. Anyways. Sorry for rambling on. And thanks again for your advice sir. Cheers
@Andre_M_3D
8 жыл бұрын
+CATAHA Thanks man. I had my car at a German only garage and they gave it a once over and was told it was in excellent condition front end wise, shock wise etc. So only have a few things left to cross off the list. Again thanks man and I will definitely ask you if I need any help. Have a good night sir
@jasonputtock44285 жыл бұрын
what the hell is a GREYED out box. I have 3 greyed out boxes in ABS. x2 front left and 1 left rear. Those sensors have just been replaced. I hd just changed all 4 ABS sensors as they were all damaged. Broken wires. now 2 are greyed out but the front has 2 code on the left.07{007} + 21{033} ... can you please advise. Furthermore! My EWS has done over 159k KMS more than my IKE which is at 196000 odd. Can this be changed in PA....
@jasonputtock4428
5 жыл бұрын
yes i also sub'd
@jasonputtock4428
5 жыл бұрын
@@cataha IKE and EWS has to have same Vin Number, once that condition meet then whichever module has more miles/kilometers then it will pass it on to all others IKE/EWS/LCM/Ect.... For some odd reason. The EWS has the highest mileage. The IKE displays the lowest and LCM has the same as the IKE. I do not understand why the data did not update accordingly. sad... oh well... I will recharge laptop and reread the codes again tomorrow. I fin d it odd that I may have installed defective sensors but I do have the Traction control light on and the ABS light. so you maybe right about the module. I have INPA but its very problamtic installing this on the laptop. Its a real basterd to install. Cable has problem with the car itself. i just gave up and PA is the only way forward right now.
@MegaArsenal817 жыл бұрын
hi, can you code eu indicator lights into us style with this? thanks
@adrianroman7191
5 жыл бұрын
Thanks a lot! I will do it if I get to know ilthe program deep enough ;)
@michaeldang36128 жыл бұрын
Hi, I have the same scanner. Where can I go to reset airbag light? Thanks
@michaeldang3612
8 жыл бұрын
Hi Cataha, I did clear the codes. But, the airbag light would not come off. Can you screen shoot what button I should check or uncheck?
@michaeldang3612
8 жыл бұрын
thank you Cataha... I will try again and let you know. Inside SRS which code I should check or uncheck. I end up with more codes :(
@michaeldang3612
8 жыл бұрын
Hi Cataha, I will try tomorrow and let you know.. Thank you.
@murphycango9 жыл бұрын
iyi günler, lcm içerisindeki light coding e giriş yapamıyorum bilginiz varmı ? 1998 520ia (not available for this coding index,yet!)
@murphycango
9 жыл бұрын
CATAHA Thank you for your answer do I do the necessary checks
@andatibi8 жыл бұрын
hello guys who now to fix this message "no coding available for this index, yet!" i have a 520i e39 and i use the same scanner tnx
@andatibi
8 жыл бұрын
tnx for answer and i can't not fixed this problem this message he show me only on the lcm / coding data/light coding
@andatibi
8 жыл бұрын
Can you help me with this problem I would like to make a video to send it , i'm not very good with this
@ninjabeatz905
7 жыл бұрын
Voicu Tiberiu there were 6 types of LCM's for the BMW e39 520i 1998
@ninjabeatz905
7 жыл бұрын
thank you very helpful
@ninjabeatz905
7 жыл бұрын
What operating system does this run on
@IPGAuto5 жыл бұрын
Probably the best software you an get. Got mine at bimmerstuff.com
Пікірлер: 46
it was the best tools for old bmw
hello guys i have BMW Scanner 1.4 without DME-live data,how i can unlock this icon.Thanks:)
reason to encode closing windows remotely and no change?
Hi, I just coded my alarm but nothing is happening, not even optical signals, i have a e46 320d
Hello, I was changing zke because of a breakdown, and now my car won't start.
hi how do I re-code a use cluster which display "CodE" at the mileage interval? I replace the the eeprom of the used cluster with my original one hoping that I don't need to re code it but it was not as expected. How do I proceed with the PA soft to make it works?
Hi, do you know where can I find a user manual where all functions are described? Thanks a lot!
@adrianroman7191
5 жыл бұрын
@@catahaThanks a lot, I'll try to do it if I get deep enough in it :)
What what computer are you using are you using OS X P and which is the best 32 or 64 so I can buy a used one and place it in the computer
hi sir i am been watching yours great vedio.only one think i need help what is eeprom and what it does in compouter.lot times i buy tool from china they says modify EEPROM. TO MAKE KEY PLS PLS CAN YOU TELL ME WHAT THAT MEIN.MODIFY HOW CAN BE DONE?I KNOW THIS (Q) IS SILY BUT I WANT LEARN.MAY YOU CAN HELP ME WITH THIS? MATTER
on my e46 i get p1640 eeprom error code.checksum drifty. I s it possible to rewrite eeprom with data from another e46 ecu? do you have this data ?
Hi, I also bmwscanner by cons I can not go in the menu "Livedata" is gray and therefore not accessible. I have a 320d DDE-3.0 and a 330d DDE4.0. I solder pins 7 and 8 because I had an error message "error connection with IKE" but thanks to the welding of 7-8 the software works perfectly. Should you weld other pine together to access the "livedata" ?? Thank you Merci, tu peux me répondre en anglais je ferais la traduction merci
Can you program a use abs module to a 2007 BMW 328i?
How can I read dealership history ? I forgot. :(
looks like better than inpa right ?
what section will be the emmissions or transmission issue codes be?
WHY IS IT SO HARD TO DOWNLOAD P.A. SOFT? WHERE CAN I DOWNLOAD IT WITH OUT ANY PROBLEMS
How to install driver for BMW Scanner 1.4.0 on Windows 10 (64bit): kzread.info/dash/bejne/lI6Ays6fdNDTn8o.html
hello, no recoding IKE the Bmw M3-e46???
Are you able to code the speedometer from US to EU with this tool?
How did u enabled live data in dme ?
Hello, I search your channel for help.I have a BMW scanner 1.4 interface but i cant find my software installation CD.The one i can download from the official site is just a DEMO Version of it.Can you help me and send me software?
hi. I have a 2004 bmw 320i. I just purchased an uncut key with the security chip in it however from what i was told even if i have a locksmith cut me a key the car will not start as the key is not programmed to the car(anti-theft) My keyfob that came with the car is in bad shape and i tried replacing the battery and had no luck. BMW wants way to much for a new keyfob so i purchased one online. The retailer told me the only thing i had to do was get it cut and then have BMW ensure the anti theft chip is coded to the car. Issue is ..that BMW want to make money and want to sell you a key for 300$...Would this programmer allow me to program the car to my new key? I know how to program the key to unlock lock doors etc..but i am referring to the anti theft portion of the key that has a chip that only works with the car it is paired to. So will this BMW scanner allow me to pair the key and avoid going to BMW ? Hope i explained it properly so you can understand my issue at hand. Thanks
@Andre_M_3D
8 жыл бұрын
+CATAHA Thanks man. I will probably bring the blank key to a locksmith to have it cut however once its cut from what i understood i could only open doors with key or us keyfob to open and lock doors(once programmed that is) But could not actually start the car as the EWS is not programmed to new key. I wonder if BMW can do it at their shops or am i out of luck. I am not looking to purchase programmer etc just to program once key as it would probably be cheaper to go to BMW and buy a new pre cut key at he end of the day. I do believe i understood your reply. Have you even heard of a locksmith that can program EWS to key or if the dealership will even do it with an aftermarket keyfob bought off ebay? lol. I may have just wasted my money.
@Andre_M_3D
8 жыл бұрын
+CATAHA wow. Than i do believe i wasted my money on the ebay key. I am in way over my head. I managed to fix the original keyfob by putting new VL2020 battery however case would close properly so i tried removing and trying again and broke the leads off the battery and the ones on the oroginal were useless and impossible to remove....so I ordered a few from different vendors in the hopes the leads will be in the correct position on battery and I will then be able to solder back in and close key. last battery had weird leads that ended up putting the battery way to high hence not being able to close the key so I gave up after trying to bend then enough to move battery to correct position and they broke. SO hopefully i did not ruin anything when messing around the first time around. I also purchased better soldering equipment including a pump to remove all the excess solder etc and some flux and better solder as well. I knew the ebay key was too good to be true for 40$. They promised all i had to do was get key cut at locksmith and do the old put in ignition turn off and on 5 times hold button down and then middle button 3 times crap and I would be able to use this key to open doors and drive. They neglected to tell me because of the anti theft system the key is not recognized and about the only thing it will be good for is opening doors...lol. Oh well. I learned my lesson. I live in New Brunswick Canada and doubt anyone around here would have the equipment or knowledge to program the blank ebay key for me. SO i may not have any choice but to pay the stupid amount of money BMW wants for a new keyfob. Thanks again for your help and clarification. I had a feeling it was not going to be so easy..cheers
@Andre_M_3D
8 жыл бұрын
+CATAHA oh really ...wish i had one of those guys close buy...lol. I have heard rumors of a guy who could cut BMW keys about 30 minutes away from where i live but have had no luck finding his name etc. I will keep trying. For now I am just waiting for the few VL2020's to arrive so i can attempt to replace battery again and close the case and pray i am able to program to car again. It actually worked last time but the bloody thing was in the wrong spot. So i am hopeful that i did not short anything out etc. I can still start the car but just not use the keyfob to lock or unlock at this point. So fingers crossed i am able to solder the new battery when it arrives and program and be done with this for now. Been slowly bringing a 2004 320i back to life. I got a good deal on it...body was in real good shape with basically one little rust buble and that's it...I replaced every thing you can imagine to make sure i had a good reliable car for a summer toy.New OEM fuel pump, new filter, new Bosch ignition coils, replaced valve cover gasket, just purchased new water pump with metal impeller as i heard they put garbage pumps from the factory with plastic impeller.. I also put fresh oil in her and have a few minor electrical issues to fix then I am done. I love the car and so far ended up not spending very much in the big picture so as long as i can actually use the key to start the car it's will have to do for now...lol. It's parked for winter at the moment so I am just doing as much research as possible until i can start working on it again. I purchased it as a Christmas gift to myself...lol. And my father always loved BMW's and could never afford one so as he is battling a few health issues I kind of wanted to surprise him with this and hopefully go on a few road trips before i loose him. Anyways. Sorry for rambling on. And thanks again for your advice sir. Cheers
@Andre_M_3D
8 жыл бұрын
+CATAHA Thanks man. I had my car at a German only garage and they gave it a once over and was told it was in excellent condition front end wise, shock wise etc. So only have a few things left to cross off the list. Again thanks man and I will definitely ask you if I need any help. Have a good night sir
what the hell is a GREYED out box. I have 3 greyed out boxes in ABS. x2 front left and 1 left rear. Those sensors have just been replaced. I hd just changed all 4 ABS sensors as they were all damaged. Broken wires. now 2 are greyed out but the front has 2 code on the left.07{007} + 21{033} ... can you please advise. Furthermore! My EWS has done over 159k KMS more than my IKE which is at 196000 odd. Can this be changed in PA....
@jasonputtock4428
5 жыл бұрын
yes i also sub'd
@jasonputtock4428
5 жыл бұрын
@@cataha IKE and EWS has to have same Vin Number, once that condition meet then whichever module has more miles/kilometers then it will pass it on to all others IKE/EWS/LCM/Ect.... For some odd reason. The EWS has the highest mileage. The IKE displays the lowest and LCM has the same as the IKE. I do not understand why the data did not update accordingly. sad... oh well... I will recharge laptop and reread the codes again tomorrow. I fin d it odd that I may have installed defective sensors but I do have the Traction control light on and the ABS light. so you maybe right about the module. I have INPA but its very problamtic installing this on the laptop. Its a real basterd to install. Cable has problem with the car itself. i just gave up and PA is the only way forward right now.
hi, can you code eu indicator lights into us style with this? thanks
@adrianroman7191
5 жыл бұрын
Thanks a lot! I will do it if I get to know ilthe program deep enough ;)
Hi, I have the same scanner. Where can I go to reset airbag light? Thanks
@michaeldang3612
8 жыл бұрын
Hi Cataha, I did clear the codes. But, the airbag light would not come off. Can you screen shoot what button I should check or uncheck?
@michaeldang3612
8 жыл бұрын
thank you Cataha... I will try again and let you know. Inside SRS which code I should check or uncheck. I end up with more codes :(
@michaeldang3612
8 жыл бұрын
Hi Cataha, I will try tomorrow and let you know.. Thank you.
iyi günler, lcm içerisindeki light coding e giriş yapamıyorum bilginiz varmı ? 1998 520ia (not available for this coding index,yet!)
@murphycango
9 жыл бұрын
CATAHA Thank you for your answer do I do the necessary checks
hello guys who now to fix this message "no coding available for this index, yet!" i have a 520i e39 and i use the same scanner tnx
@andatibi
8 жыл бұрын
tnx for answer and i can't not fixed this problem this message he show me only on the lcm / coding data/light coding
@andatibi
8 жыл бұрын
Can you help me with this problem I would like to make a video to send it , i'm not very good with this
@ninjabeatz905
7 жыл бұрын
Voicu Tiberiu there were 6 types of LCM's for the BMW e39 520i 1998
@ninjabeatz905
7 жыл бұрын
thank you very helpful
@ninjabeatz905
7 жыл бұрын
What operating system does this run on
Probably the best software you an get. Got mine at bimmerstuff.com