Please continue with your great work. We need more N63 content on YT. When time comes to do my turbos, I'll do my best to film and help others. N63 is an awesome engine when cared for religiously

@dnl35projects

Жыл бұрын

Thank you ! One of the reasons why I decided to do the vids was to help the N63/S63 community out there - There's a lot of misleading information online.

@byronporter4604

6 ай бұрын

About time someone who displays restoration and prevention instead of making us N63 owner's just feel down and defeated 👍🏽💯

Really appreciate you taking the time to make these videos. About to start a rebuild on My n63 so they are extremely valuable to me. Keep up the great videos! I appreciate you!

@dnl35projects

Жыл бұрын

Thank you !

Amazing work Daniel !! Keep up the great work !! 👏🏻👊🏻

@dnl35projects

Жыл бұрын

Thank you! Will do!

Thank you. I will be rebuilding my motor. Got it back from the shop a while back from being sleeved. Nice sleeves on yours as well. Please keep the videos coming. Great job.

@dnl35projects

Жыл бұрын

Thanks ! You’ll see it’s time consuming but worthwhile job.

Thinking about buyng 550i. Thanks for these videos!

@dnl35projects

7 ай бұрын

I’m glad you liked them - Much more to come on the twin turbo V8, I really love this engines and sometimes wish to get fired from work only to spend more time doing videos 🤣

Supporting from south africa

@dnl35projects

Жыл бұрын

I appreciate your support - Thank You

Thank you great video !!

@dnl35projects

Жыл бұрын

Glad you liked it!

Thank you for this great video. It's the first time I get to see a bottom-to-top assembly of this very complicated engine.

@dnl35projects

8 ай бұрын

Glad you liked it ! Will do another one with an S63TU in a few weeks time 👍

@rollydoucet8909

8 ай бұрын

@@dnl35projects I have a question. Early in the video, the main caps are installed with only the two center bolts. The assembly goes quite far before the outside main cap bolts are installed and torqued up. What is the reason for this?

Please do more videos like this please, I love this style of video and when I get my hands on a M5, I need to learn how to wrench on it.

@dnl35projects

Жыл бұрын

Hi, Thank you for the message ! After all these car are not really hard to work on, just very time-consuming since the engine has to come out for few maintenance items . As long as you have a bit of space and lots of patience 🤣 they are great cars/engines to own

I subscribed because not many people can do a x5-10x speed video and still give great instructions and information!

@dnl35projects

8 ай бұрын

Thank you very much ! Keep an eye out for the next vids - I’m currently rebuilding the engine of an M5 and will include much more details in that video

Great stuff Danial, you remind me of my younger days building engines. catch up soon.

@dnl35projects

11 ай бұрын

Thank you Ciro !

Great work I just did my valve seals this bring memories. I did it with engine inside cars. 👍🏻

@dnl35projects

Жыл бұрын

Thank you !

@matthewwade3936

10 ай бұрын

You did ur seals inside the car ? Did you have to use a mirror ?

Super vidéo Daniel ! Précise et complète ! J’adore 👌

@dnl35projects

6 ай бұрын

Merci mon ami

Legend!!! Great job mate!

@dnl35projects

Жыл бұрын

Thanks!

Great work, buddy 🎉

@dnl35projects

Жыл бұрын

Thanks 😁

Respect Daniel ✌️ great work

@dnl35projects

Жыл бұрын

Thank you so much ! Mid-life crisis means I'll be working a lot more on this car and making lots more videos 🤣

Very satisfying

@dnl35projects

8 ай бұрын

I’m glad you liked it 👍

What a nice engine

@dnl35projects

11 ай бұрын

Indeed!

Nice video, and what a beautiful engine from BMW

@dnl35projects

5 ай бұрын

Couldn't agree more! These are awesome engines, they just need to be looked after properly.

Great video , well done

@dnl35projects

Жыл бұрын

Thank you very much!

Great video!

@dnl35projects

Жыл бұрын

Glad you enjoyed it

I sure hope I will never have to do this on my 2011 X5M (now 70k km on it). But if I do I will for sure use this as an inspiration :D

@dnl35projects

Жыл бұрын

Frequent oil changes (every 4-5k kms) will definitely delay the need for a rebuild however the seals on that engine will give up at a certain point

@infiniteuniverse1757

10 ай бұрын

I have a 2013 X5M at 174k+ km, and running strong getting 19mpg....under 120km/hr. I had to replace the CCV stuff, ignition/spark, rear suspension airbags/air block and coolant reservoir; fortunately no fuel injectors but there is some . Keep the engine cover off to keep from baking all the coolant and CCV lines, change oil every 5-6k miles, trans fluid/filter every 40k, and ignition & spark plugs every 20k

@norseman5041

6 ай бұрын

only a matter of time my friend, 😞these engines are not the best unfortunately.

@farturinn

6 ай бұрын

@@norseman5041 All depends on how many km and how its used/maintained. Mostly how they have been used initially, good maintainance later on on a beat up unit will not help I suppose. My motor consumes no oil

형제 님 엔진이 너무 깔끔 합니다 멋지네요!!

@dnl35projects

7 ай бұрын

🙃

I still have not finished watching the video, and couldn’t wait to subscribe for more n63 content, as I gather the motivation to replace the HPFP on my 2011 X5. I can’t wait to review more of your videos, as I love this vehicle. I am up to 220K miles (yup, 353,000km), and it was running like a top until one of the two high pressure started going bad, so I need to replace both of them. Anyway, thanks for the video, and greetings from Arizona, USA.

@dnl35projects

2 ай бұрын

Thank you ! Yes I agree they are awesome cars ! My tip for you is to check for leakage in all fuel rail connections once you completed the job.

Definitely like and you definitely earn this subscription I have a 2013 BMW 750LI extra drive and have to go through this whole process also it's so fuzing irritating to think about how much money we've spent on these cars and they don't hold up

@dnl35projects

Жыл бұрын

Hey, I understand your frustration but on the bright side if you do get through the rebuild and address all major N63 issue the car (or at least the engine :) should be good for a long time.

I'm thinking about doing this job myself. This video was right on time. Thank you for sharing your voyage with this. I definitely hit the like button. I made sure to hit the subscribe button. I'm looking forward to watching you're next video.

@dnl35projects

Жыл бұрын

Thanks David. The process can be a bit overwhelming and really time consuming but not as hard as it looks if you follow the BMW manuals. My plan is to do a step-by-step video (or few videos) on the S63 rebuild, just finding hard to locate time for editing all videos.

@rskylinej

Жыл бұрын

@@dnl35projects hey did you ever get to the s63 rebuild video diy? I’d love to do this myself, just nice to have something to look back on time to time.

@dnl35projects

Жыл бұрын

Hi, It's definitely on my to-do list but given the amount of time involved in editing the videos it might take a bit of time .....

man you are the best

@dnl35projects

5 ай бұрын

haha Thank You !

@user-gx2kl2xo6x

5 ай бұрын

can you do my engine i need to service from A to z

very neat work, keep it up brother

@dnl35projects

Жыл бұрын

Thank you

I watched this video and, time by time, popped up in my mind what your uncle would be saying... ;-) Great job dear cousin!

@dnl35projects

Жыл бұрын

LOL He would be proud for sure ! Specially knowing that he’s one of the main sources of motivation for the hi-Tec Brazilian style engineering we do today 🤣 - thanks for watching

Would love to see a deeper dive series in rebuild from scratch. Tips/tricks, and how to time the cams. The more N63TU content the better.

@dnl35projects

7 ай бұрын

Hi, that’s the plan with the current F10 M5 I’m rebuilding. I can guarantee you I’m posting these in the future but due time issues it might be a while. Between, the assembly procedures for N63 and S63 are the same since they have the same block.

Excelente

@dnl35projects

9 ай бұрын

Thanks

i subscribed for you because you are really helpful

@dnl35projects

2 ай бұрын

Thank you ! thats the sort of feedback which keeps me going :)

Nice work bro

@dnl35projects

Ай бұрын

Thanks

Great video…nice to see videos on n63 repairs. Did some work on mine. Had to replace the turbo oil return housing. Used lil REINZOSIL.

@dnl35projects

8 ай бұрын

Goo to know you’re on top of your maintenance - the oil return housing is a common issue on these V8’s but what bothers me is that BMW does not make a gasket for it and force you to buy a new housing ….

@sithhul9264

8 ай бұрын

@@dnl35projects personal experience…change the thermostat to 90 Celsius spec will help the engine sooo much

Thank you for the reminder, had commented previously. Have 2012 750i and just got the engine out. I am in the tear down process. Has at least one bad rod bearing and one scored cyl wall. Not sure what direction I will go to get it fixed. Would likevto try and minimize the cost. Worked in machine tool as a BSME designing high milling spindles. Have engine swap of 525i and done a partial rebuild of an early Ford tractor.

@dnl35projects

28 күн бұрын

Nice ! If the bores are scored you will need to sleeve the block. I heard of a dealership in America selling long blocks for about $4.5k and do t know if that’s a myth or not - it’s hard to believe since a crankshaft cost half of that …

Awesome video - would've loved more commentary and specific torque values etc - as this is great filming!

@dnl35projects

11 ай бұрын

More to come! I had a few people asking for the torque specs, will definitely try to do something a bit more technical. Thanks

@ElliottBrooks

11 ай бұрын

@@dnl35projects nice one. I’m hoping to get an E70 X5M in the next 12-months and would film some content after that - so keen for any detailed pieces you put out!

Good video. My X5 N63 is next, got some funny clicking noise from Bank 1 and can't figure out without opening it.

@dnl35projects

Жыл бұрын

Thank you - Check the timing chain video on my channel, the guides go bad and can cause the chain to be slack and tick / rattle

Excellent video! And you showed every detail. I was reading comments and answering each person. Respect!!! I have X7 i50 2019 It has 39000ml on it. Running good. What do you gonna recommend me for the future?

@dnl35projects

Жыл бұрын

Hi, thank you ! At that sort of mileage your engine should be perfect still and you also have the updated version of the N63. My advice would be to change the oil more frequently than BMW recommend ( 5k miles) and and definitely keep all fluids up to date.

Nice job. I can see you’re a very meticulous person 👏 what do you use to clean your parts?

@dnl35projects

Жыл бұрын

Hi Denzel, thanks ! The garden hose and some degreaser did most of the job however I also built a Vapour Hooning cabinet for the aluminum parts - It does an amazing job with the engine covers and small bits

Hi, great work!!! And so much detailed, appreciate this alot. Please can you help with torque specs for the S63tu main bearing cap bolts and the straight con rod bolts. Thanks in advance 🎉

@dnl35projects

11 ай бұрын

Hi there, I’ll have my computer (with BMW software) back in a few weeks and could check that for you. The plan is to make another video with all torque specs for this non-tu version but the TU shouldn’t be much different

@fmmd-1

11 ай бұрын

Yea that video with all torque specs will indeed be very useful for the bmw community at the rate with which this engine is being rebuilt nowadays. Thanks in advance 🎉

Hi, really great content! Thanks! Any news on this M5? How do KingTech rods/pistons handle?

@dnl35projects

4 ай бұрын

Hi, I’m yet to receive that block back and should start assembling it over the next week or so - I’ll definitely make an update video on how that performs

Great video, but the music threw me off, great content regardless 👍🏽

@dnl35projects

7 ай бұрын

Thanks 👍

The head bolts should have a couple rounds of 90 degree turns

@dnl35projects

Жыл бұрын

Correct, you can see the numbers written on cardboard at 10:52. The head bolts are torqued to 30Nm + two times of 90 degrees of angle

Great job Daniel! Thanks for the video. I’m planning to rebuild my engine. Hopefully, the block is in a good condition and won’t need sleeving. Noticed that you used piston rings from Goetze. Could you please send me a link for the set? Googled it many times, checked their official catalogue, but couldn’t find piston ring kit for s63b44 from Goetze. Thanks in advance

@dnl35projects

Жыл бұрын

Hi Luka, the part number for Goetze is 08127300-00 and they do fit the stock S63 pistons HOWEVER please bear in mind you may only use these rings if you sleeve your block. The stock S63 block is made of ALUSIL and these rings are NOT compatible.

Great video! 😁 Do you have a video or timelapse of taking the engine out of the car step by step?

@dnl35projects

8 ай бұрын

Hi, I have a video for the M5 but unfortunately not for the X5M - the only thing really different is the fact you have adaptive suspension on the X5M and a few hoses to be disconnected under the front RH wheel arch.

Very nice video. Are those cylinder sleeves? Were the original cylinder bores out of spec?

@dnl35projects

9 ай бұрын

Hi, yes 2 cylinder walls had Dee scratches on them so had whole block sleeved

Great video! Processes are to accurate and meticulous. Please, please, please😁provide a list of all torques specs you used; I can't find a consolidated list anywhere. Thanks from Norfolk Virginia.

@dnl35projects

6 ай бұрын

Thank you ! I’m in the process of making a step by step assembly video but that will take a little while. Download ISTA (BMW software) it has a manual for everything in your car and not only the torque specs but how to correctly assemble and dismantle parts.

Excellent video. So I imagine that since I don't see 6 bolt main bearing caps, it is the N63 engine that you reassembled?

@dnl35projects

8 ай бұрын

Hi there, that block is a S63 out of a 2011 X5M however both S63 and N63 blocks are the same, made from the same casting - The only block difference is the ways some of the oil/water galleries are drilled but the S63 has a big "N63" imprinted in it. Both use the same crankshaft and same 6 bolts bearing caps

@BobsGT235

8 ай бұрын

Ok, thanks. I just didn't see you put the side bolts into the engine block, which then go into the main bearing cap.

Hey buddy, im just about to start taking my x5m 2016 engine out to start rebuilding. thank you for up loading, you havent got a full video have you? again thanks Phil

@dnl35projects

8 ай бұрын

Hi Phill, I’m currently waiting on parts to start rebuilding a S63TU which is exactly like your engine and the plan is to make videos along the way discussing clearances and torque specs. This however should take another month or so. Let me know what you need and I’m happy to help out.

@philldaniel4097

8 ай бұрын

cheers buddy i have actually just finished taking engine out, im just removing all auxiliaries from block hopfully will be stipping down block next week @@dnl35projects

What about converting it to dry press in cylinder sleeves for durability like they do on the 2000hp coyote blocks

@dnl35projects

Жыл бұрын

Hi, Unfortunately I have no experience with this kind of procedure.

Great video. My engine is the S63B44T4 on the F96 chassis. Can you please tell me some precautions about this engine, especially what should be noted for everyday 0:15 driving? Thanks!

@dnl35projects

Ай бұрын

That engine is a dream and the best S63 made (I'm currently rebuilding a hydro-locked one) and its a day and night difference when compared to the original non TU (the one in the video) - The best thing you could do to keep that engine healthy is not to abuse it on the first 5 min of driving (engine is cold) regular (5k kms or 12 months) oil changes - Don't take me wrong, these engine are made to go fast and produce big HP but ONLY after your temp gauge is sitting half way. It is also a good idea to replace/flush ALL fluids every 2-3 years (coolant, transmission fluids etc)

Wow! impressive work!! im curious about the N/S63, ive got a 09 750i, can i just put S63 pistons, rods, exhaust camshaft and turbos and basically have a homebuilt S63?

@dnl35projects

7 ай бұрын

You could do that in theory but the car will need to get tunned so you can take advantage of all those mods

@MrJaredbbr

7 ай бұрын

@@dnl35projects ill be looking at getting a M5 DME, turbos, manifolds etc, looks like i better start ordering bits 😁

Can u share us the torque specifications from connecting rod, crankshaft and cylinder etc. thanks and God bless 😊

@dnl35projects

11 ай бұрын

Hi, I’m working on a more detailed (technical) version of this videos and will have the torque specs with assembly tips. Keep an eye out on the channel on the weeks to come - Thanks

hi, do you tighten all the screws to the head with the same torque or some additional 90 degrees

@dnl35projects

11 ай бұрын

Yes, the head bolts are torqued to 30Nm + 90 + 90

Great job...I have recently found one cylinder 6 of intake cam turn blue .On further inspection found that cam cap is scored badly at one side along with cam ..Any one can tell what cause of that. Thanks

@dnl35projects

11 ай бұрын

Yes they are good engines, just need to be looked after properly

Well done for the work, very professional, looks great, I have a garage and also a car like this, I'm doing a project on it, if I need parts, maybe you can help me, my name is Rom, and I'm from Israel, I'd appreciate your help, thanks

@dnl35projects

5 ай бұрын

Hi, sure ! Send me a message if you get stuck somewhere - dnl35projects@gmail.com

Hi! Couple weeks ago I have completely rebuild my engine - new bearings, piston rings, timing chain, oil pump, cylinder heads were resurfaced etc. it had 295 000 km so it was good moment to do this. After rebuild, first 500km engine was treated very gentle and after those 500km I changed oil + filter, oil of course wasn't looking perfect and there were very small rasping. Next 1000km engine was treated a little more hard but still not more than 3500 - 4000 rpm and never full throttle. This weekend I have changed oil again - after those 1000km it's still not looking perfect. Do you think it's normal? Engine run perfect. Maybe 1500km it's still not enough for all parts to "fit" ? How oil was looking in your car?

@dnl35projects

Жыл бұрын

Hi, did you wash the oil lines and oil cooler ? There’s acceptable to have some debris on the first or maybe 2 oil change but not much. At this stage I thing there’s isn’t much you can do. Yes I had bits of the old bearings on the first oil change (1000kms) and will be doing another one soon (5000kms)

I have that same engine and question for you, if when engine still ruining good is it necessary to replace rod bearings ? Car has 270 kkm

@dnl35projects

Жыл бұрын

Hi, I'm about to make a video about this very same question but at 270k kms I'd say the best thing to do if you want to keep the car for long is to drop the engine and rebuild it. (if it hasn't been done). The Rod bearings and main bearing on this engine (in the video) have 162.000kms and they were OK (a little wear but OK) - When I did the bearings on my M5 it had 140.000kms and were completely destroyed. If the previous owner did not abuse the car and always waited for correct oil temp before driving it hard your bearings could be good still (considering you are also looking after the engine and changing oil frequently)

I've got that torque wrench! One question, why would you not up the rods? Budget build for customer, or they're not going past 700/800 hp?

@dnl35projects

8 ай бұрын

Hi, the pistons and rods were still good and this it my wife's car, anything with 100Hp that moves is OK for her 🤣 let alone the 550HP already in the car. The Current M5 I'm rebuilding is going to be fully forged - Keep an eye up for the next videos

Hey just 1 question. With the chain tensioners bolts. Can you get them freely in the engine without them having some tension or do they build tension with them going in the engine ?

@dnl35projects

Жыл бұрын

Hi, I'm not sure which bolts you mean ?

greetings brother! Great job, thanks for sharing your knowledge! I can ask you a question, I have a 2012 BMW X6 M, S63 4.4 twin turbo gasoline engine. The block broke, I'm looking for a block to make the new engine. Several mechanics tell me that the N63 block is the same as the S63, is that true? if you can help me thanks 😎

@dnl35projects

Жыл бұрын

Hi, Yes the block, crankshaft, oil pump and several other bits on the lower side of the engine are the same and in fact my S63 have a big "N63" written behind the timing chain guides. The main differences between both engines are pistons, cams, exhaust manifold and turbos

@chombifittrends968

Жыл бұрын

@@dnl35projects Thank you very much for your answer. if my car block says N63/1 and the serial is S63B44A. so with your answer I'm going to look for a 3/4 of an N63 engine and the rest I have from my engine since what broke was the block. thanks again

Great job! I bought a 2010 X5M and the engine blew in the first month. The auto dealer would not help me at all. So it has been in my driveway for almost two years now. I wish you could help me fix it? What I saw with the endoscope camera was one of the cylinder walls looks like it cracked. And I'm getting quotes of 15,000 USD to fix it. I'm so sad and still paying on the loan.

@dnl35projects

Жыл бұрын

I'm sad to hear that Nick. Unfortunately that's it happens a lot, it might even had a problem before you bought and someone just patched it up to put the car for sale. I'd definitely help if you lived near by. On a bright side, once you have the engine and taken care of, these cars are amazingly fun to own and drive. They pretty fast and have lots of room for any hobbies you may have. Do you have any interest in rebuilding the engine yourself ? I could help remotely 🤣🤣

Thank you for your videos!!! I wish you were in canada What is the safe tune for this engines? How much hp is safe ?? Thanks

@dnl35projects

20 күн бұрын

Thanks - Regarding the safe HP, it varies a lot depending on the TUNE - a well maintained S63TU should be able to push close to 700Hp safely on stock internals

@davitmacharashvili6397

19 күн бұрын

@dnl35projects Thank you very much !!! As you said close to 700hp is safe Is it safe for transmission as well? Let's say 100hp more then stock Would be safe for both engine and transmission? Thank you again!!!

Quick question about setting the timing, did you put the camshafts in a certain way or it doesn’t matter ? I have rebuilt Audi engines but never BMW ones nd not familiar with them, with Audi engine camshafts have timing marks on them

@dnl35projects

7 ай бұрын

Hi, you’re correct - timing the engine is exactly that, aligning the crankshaft correctly with the cams so they are synchronised. If you’re engine is out of timing the valves could open at the wrong time and destroy the engine. Both S63 and N63 engines have timing marks however I highly recommend using the correct tool to do this job. I’m yet to make a video but there are a few vids on KZread showing how to do it.

If i have to replace exhaust camshaft on bank 1 can i get away without touching timing on intake? And have you ever seen or heard of code 164041 exhaust camshaft installation faulty code thank you

@dnl35projects

Ай бұрын

Thats an awkward code - Did you just build the engine or it threw this code out of the blue ? The timing tool holds both cams and the crank in place so you will need to loose both vanos sprockets (intake and exhaust) them re-tight them with the correct timing

i think u will get a leak from the upper oil pan as u did not put sealent where the block meets with the timing cover

@dnl35projects

Жыл бұрын

Hi Muki, that section of the gasket has a special "Rubber" compound which expands when the parts are torqued together creating the seal - Also BMW manuals don't call for silicone on that section - Hopefully I won't leak 🤞

can we please know how much did it coast you to get everything for the rebuild propably make a list for each thing you bought and used with the price

@dnl35projects

25 күн бұрын

Hi, I’m in the process of making a video explaining all that - for a good running engine you can expect to spend about $5k in parts plus labour

Can you please tell me where i can get all the gaskets and all that engine components at I need to rebuild my engine. Also the torque specs diagram, and everything. Thank you

@dnl35projects

6 ай бұрын

Hi, you can buy the gaskets from FCP Euro or ECS tuning website. Its considerably cheaper than buying from BMW - Im currently working on a video for the toque specs on that engine.

Nice video. Why did you have to rebuild the engine? How many kms were on it? What symptoms did it have?

@dnl35projects

8 ай бұрын

Hi, it was blowing a bit of smoke 💨 and I was certain it was the stem valves but once I opened it there were scratches on 2 cylinder walls. 162k Kms - these engines are beautiful but they definitely need rebuilding after 100-150k kms - even if it runs well, every single seal/gasket will leak

@darylmorse

8 ай бұрын

@@dnl35projectsThey are very impressive, even though they aren't the most reliable. I hope it lasts for you! Thanks for sharing the video.

What car did this engine come out of? I plan on doing a rebuild of my f13 m6 due to spun con rod bearing.

@dnl35projects

Жыл бұрын

Hi, it's out of a 2010 X5M - Te best advice I can give you is to take your time when doing it.

What's the torque specifications for the main and Conrod tightening?

@dnl35projects

4 ай бұрын

Hi, they are torqued to yield then rotated - I’m about to make a video with all torque specs, hopefully in another month or so

Getting a lean code, high long term fuel trim at idle, corrects under throttle. What are the most common areas of a vacuum leak on this engine?

@dnl35projects

2 ай бұрын

PCV Hoses for sure are a good starting point - Buy or borrow a smoke machine and test the intake for leaks

@tariqyunus4605

2 ай бұрын

@@dnl35projects replacing the PCV hoses this weekend

@tariqyunus4605

2 ай бұрын

@@dnl35projects changed PCv valves and oxygen sensors. Smoke test negative. Long term fuel trim bank 1 went from 20’s and bring up check engine light to 10-15. Still high, maybe bad fuel injector?

Did you sleeve the cylinders?

@dnl35projects

4 ай бұрын

Yes, cast iron sleeves - once you do that the block actually gets stronger than with its factory Alusil bores

What brand piston rings did you use? Also are those different connecting rods they dont look like X5M

@samkuvila8774

5 ай бұрын

Also do you remember the piston ring sizes

@dnl35projects

5 ай бұрын

Hi, they are OEM BMW pistons and rods, with a heat treatment and skirt coating done to the pistons. The rods on some 2009 and 2010 are cut differently to the post 2011 onwards S63

Hi, is there any particular reason why engine block have been sleeved ? I own BMW 650i with 100k miles, it desperatly need an engine rebuild. BMW sells oversized pistons and there are shops who can bore and hone alusil blocks.

@dnl35projects

Жыл бұрын

Hi Peter, the cylinders 2 and 5 had deep marks on the walls and sleeving the block was my best option. No shops in Australia would do the Alusil block and the cost of it would outweigh the benefits. Having the block PROPERLY sleeved will increase its ability to hold higher levels of boost. Also all 8 pistons were perfectly fine so I just had to sleeve the block and replace the piston rings

What main and connecting rod bearing did you use?

@dnl35projects

11 ай бұрын

Hi, I used King Bearings as main and ACL for the Rod-bearings.

Could you tell me how tight the bearings are?

@dnl35projects

7 ай бұрын

You mean bearing clearances or torque specs on the caps ?

Why did you go with OEM pistons and rods? Arent aftermarket like CP Carrillo better rods and pistons, and also less expensive? If you're going to do it, i mean, a full set of both is like 5200.00 USD, unless BMW OEM is far less?

@dnl35projects

Жыл бұрын

Hi Joseph, I did not change the rods or pistons because they were good. I did get a thermal barrier and teflon coating on the pistons and new rings to match the sleeves on the block (you cannot use OEM rings)

Hi ! Thank you for video! I am about to rebuild my n63 or at least replace valve stem seals, can i ask you to tell me where did you get complete list of gaskets/orings/etc to order? thank you!

@dnl35projects

18 күн бұрын

Buy the N63 head gasket set from Elring - it’s cheap (like $200) and has all gaskets you need to do both heads, including the valve stem seals

@timafen

18 күн бұрын

@@dnl35projects thank you! Do you know, is it possible to remove heads without engine removal? And if no - is it possible to remove the engine through the top? Without using a car lift?

@dnl35projects

13 күн бұрын

Depend on the car you can remove from top but I’d advise against it - it’s much easier to drop the subframe with transmission than trying to access things from the top

I'm curious how much does a revision like this cost?

@dnl35projects

Жыл бұрын

Hi, I'm actually doing a video on that exact subject. It costed me about $9600 AUD in parts only because the block was damaged and needed to be sleeved - If the block wasn't damaged I'd have spent just under $5K

Hey Daniel, who sleeved the block in Sydney as I am trying to find someone to do it and no one wants to touch the N63/S63 blocks.

@dnl35projects

11 ай бұрын

Hi Mitch, it was actually a friend who owns a machine shop / engine building business here on the Northern Beaches (Sydney) I asked if I could share his business details on KZread and he said NO cause he was too busy 😩 Apparently because these blocks are made of Alusil it’s a lot harder to do then a normal aluminium/cast iron block. Yet he still charged me $4k but luckily my pistons were good and we were able to re-use them. I could try to convince him to do another one if you’re in Sydney.

@miitchsanders

11 ай бұрын

@@dnl35projects wow he looked after you. Definitely would like to speak with him if you can convince him!

@dnl35projects

11 ай бұрын

Send me your contact on dnl35projects@gmail.com

i need to replace the lower and upper oil pan gasket, does the subframe or transmission need to be removed, i have a 2013 bmw 550i

@dnl35projects

2 күн бұрын

Hi, the lower sump gasket is an easy task but in order to remove the upper sump you’ll need to support the engine from the top and remover the subframe / engine mounts and some lines/wires attached to it - the transmission does not need to be removed as you just need to remove some of its bolts to the sump.

What brand head gasket did you use?

@dnl35projects

11 ай бұрын

Hi, they are Elring gaskets 1.05 thick

My s63 oil consumption is like 1l 1000km, no oil leaks,have rebuilded turbos, just changed oil separators,still same. What you suggest to check next?

@dnl35projects

6 ай бұрын

Valve stem seals are the most common reason these engines blow/consume oil - Depending on the mileage your rings could be a bit worn making the oil consumption higher.

@GRASWALD.

6 ай бұрын

@dnl35projectstnx for answer. its 230tkm, compression ratio is 9, one or two cylinders 8 something,is this difference a problem? What's the easiest way to check valve stems and rings or i need to take valve covers off again?

U know the bolt size for the engine stand to the motor ?

@dnl35projects

9 ай бұрын

Hi, the bolt sizes will vary depending on the stand you have - but the tread are the same as the engine/gearbox bolts

Hi mate! Been thinking for a long time about taking a s63 in poor condition and rebuild it. What do you think about it? I wanna try something new it’s just for me :) I'd be very happy to hear your opinion on this. many thanks!

@dnl35projects

Ай бұрын

Hi, I think it depends on the car’s condition and whether you’re rebuilding it to keep the car or re sell it after it’s complete. If you’re building the car for yourself and can do most of the work it is definitely worth it however if your intention is to buy a cheap E70 X5M for example, you will not be able to make much money considering the time you spent on the rebuilt. That journey of rebuilding the whole engine is definitely something you will remember forever 👍

@-2-237

Ай бұрын

@@dnl35projects I am looking for a m5f10 from 2015 in good contidion, but I really appreciated your opinion. I have subscribed to you! Good luck👍

I have a 2015 N63 that does not burn oil , but i notices after driving for hours. I smell burnt oil only on the passenger side..smell like it hitting the exhaust, but no one can find the leak

@dnl35projects

8 ай бұрын

Thats a N63TU - they develop oil leaks in their early stages of life and usually the oil burns with the high engine temperature and dont leave traces - It is also very hard to diagnose because of the hard to reach areas around the engine bay but if I was to have a guess I'd point to your Valve cover gasket and PCV hoses

hi, can you tell me what torque the screws get because i`m rebuilding the same engine but the problem is that i didn`t find any instructions with torque. thx:)

@dnl35projects

Жыл бұрын

Hi, I'm in the process of making more detailed videos with the torque specs but its still a few weeks away .... What exactly you need the torque specs for ? You can also find detailed information on ISTA

@BogdanGamingHDbogdyZ21

Жыл бұрын

but can you tell me where did you find the torque specs and i don’t have ista. i need the torque specs from the whole engine:) or do you have insta to comunicate better?

What Are the Torque specs on everything you torqued?

@dnl35projects

20 күн бұрын

Hi, watch the videos I’m posting this week as they have the torque specs you’re after

What is the factory crankshaft main bearing clearance in n63tu am trying to change the oil from the factory because the place i live in the weather temps are hight it reachs 45c to 55c And the idea of an oil with certification of ll01 fe isnt needed because i will remove the factory catts to high flow catts

@dnl35projects

4 ай бұрын

BMW calls for a main bearing clearance of 0.026 to 0.046mm however I prefer to be on the higher side (around .040 or .045mm) and use a 5w40 synthetic oil. Removing the cats will definitely make the engine run cooler

@hasanalothman27

3 ай бұрын

@@dnl35projects thank you soo much for the reply i cant imagine that question like that to know the oil viscosity for my car comparing it to main bearing clearance that is not available any where in GOOGLE!!!

Can you advice me where can I buy cheap parts of engine for service? I want for S63T engine

@dnl35projects

Ай бұрын

Hi, There are a few companies I use to source parts at a good price and FCP Euro in US is one of them - Check their website.

Hello if my n63 4.4 twin turbo is locked up do I need a rebuild or is that engine done?

@dnl35projects

15 күн бұрын

It all depends on how much damage is inside - what h the F10 M5 videos on our channel, that engine was seized and we are going through a full rebuild - Also the S63 and N63 are basically the same engines.

Hi, I'm wondering if you started the engine already and if there were any issues ? Thanjks

@dnl35projects

Жыл бұрын

Hi, yes the car was put together in November but I only had a chance to make the videos now. Already have around 3.000kms since the rebuild and its flawless. Had a couple of codes for oil pressure when first stared the engine but it was all sorted within a day - Always ensure you use a scanner to clear ALL engine adaptations when you do any major work.

@paulvarrieur976

Жыл бұрын

Wish you could have included the turbo charger installation

@dnl35projects

Жыл бұрын

Hi Paul, keep an eye out on the channel as I'll be uploading more videos very soon. I have heaps of stuff about the X5M / S63 just finding hard to have the time of editing and putting the vids together. The Turbos are relatively easy and if you have them out please ensure you are replacing the coolant vent pipes (Y pipe) that goes under/in front of them

wanting to clean my injector well, I dropped a small 5 cm plastic brush into the piston at the bottom. is it dangerous to leave it? if not how to extract it? Thanks a lot.

@dnl35projects

Жыл бұрын

You most definitely need to remove it. If that brush jams one of the valves open the piston will likely hit it and it wold be game over for your engine. Try compressed air with a long nozzle pistol.

@etoilebrillantedumatin8888

Жыл бұрын

​@@dnl35projectsthanks a lot for your answer

Anyone knows how to adjust the camshaft pulleys on the s63

@dnl35projects

Жыл бұрын

Please explain further, the camshafts have no pulley - if you’re timing the engine you need the timing tools and follow a certain procedure

What is the average engine life with the original alusil cylinders?

@dnl35projects

9 ай бұрын

It's very hard to say since that will vary a lot but if proper maintenance is done along with frequent oil changes, the engine block itself should outlast the car easily. There are several cars with ALUSIL blocks going over 400k kms, the only downside is that the S63 /N63 engines have gaskets and seals that don't last much more than 100-150k kms so thats when the engine should get its first rebuild in my opinion.

@worldsinsider

9 ай бұрын

@@dnl35projects Thank you so much! I have several cars, of which Porsche Cayenne and BMW with aluminum blocks, do you have a couple of tips about their maintenance? Thank you in advance! I appreciate your time and information in messages!

This is S63 engine right? I wonder if the engine block is exactly the same as N63?

@dnl35projects

Жыл бұрын

Same block mate, in fact it has a "N63" imprinted on the front of it - The assembly process is the same however on the TU versions (S63TU and N63TU) the engine heads have some different components for valvetronics - Some pats are like turbo seals and orings can vary between those engines

@MegaCokecake

Жыл бұрын

@@dnl35projects thanks man!

my engine S63 X5M F85 has 120k miles on it. I know timing chain is an issue, do I need to do a full rebuild? Pull engine out etc?

@dnl35projects

2 ай бұрын

Timing chain wear on the F85 is not as bad as in the E70 but still cannot be ignored. There is a way of checking how stretched the chains are it by inspecting the tensioners (small lid behind the intercoolers) however if you want to replace the chain is definitely an engine-out job and rebuild. basically there is no way to replace the chains without removing the timing cover and in order to do so, you first have to remove the sump and the engine heads to be able to remove/install the timing cover.

@possenus

Ай бұрын

@@dnl35projects thanks for advice. I guess I will check the tensioner. Another KZreadr also mentioned tightening the oil pump chain.

Hello, I have a question, will it be possible to replace the timing belt in the s63 e71 without removing the engine?

@dnl35projects

11 ай бұрын

Hi, I don't think so. There are misleading photos online suggesting it can be done however, they show the timing cover removed but there is no way of fitting it back in without removing the engine heads and the oil pan. Your best bet would be getting it out of the car and doing a rebuild.

@gtradis7955

11 ай бұрын

​ Projekty @dnl35 Well, I'm not comforted, I'm doing it for the first time and I'm afraid to pull the engine out. However, after removing the head cover and installing the locks on 5-8, nothing was right, there were fights in completely different places, after unscrewing the loosening of the vanos, I set the rollers and the times match after turning the shaft 720 degrees, but the chain on the tensioner 5-8 is loose, it moves in the hands by about 0.5 cm .. and now the question is to replace both complete chains with the sprocket or just set the vanos 5-8 and not move? the upper slide was a cracked plastic and maybe it loosened the chain? that top slide you used to record a video about... 142,000 km car mileage uneven engine work pop-up error 002A9C AND 002A9D CAMSHAFT ON THE EXHAUST AND INTAKE SIDE

@gtradis7955

11 ай бұрын

THE CAR STAND OUTSIDE 3 YEARS PURCHASED AS A LIGHT COLLISION

I went to go try to do this myself but theres a bunch of wires and tubes in the way

@dnl35projects

8 ай бұрын

Its a very time consuming job but definitely worth while - Patience and and a good camera is all you really need (take photos of everything to install it back later)