Straight tutorial without drama or loud music. Shows what experienced hands and simple tools can accomplish. Good Job Mate!

@aaanton11

6 ай бұрын

Thanks for the great comments👍🏻👍🏻🛠

Mate! This is by far my favorite video for the rear wheel bearing replacement. I may have legitimately watched about 10 different ways to do this. I'm 100% going with your version.

@aaanton11

3 жыл бұрын

Glad it helped!, and the freetec puller is amazing ,amzn.to/3q7o1X2 Thanks for the great comments👍🏻👍🏻🛠

@SalimKhan-gk1fh

3 жыл бұрын

Yes this is this is easilyThe best BMW Wheel bearing video!

@kapilapatikiriachchige5169

2 жыл бұрын

Do NOT use Old Hub with New Bearing.

@a___________r414

Жыл бұрын

I strongly agree!

@raoulheinrichvonmerten4851

24 күн бұрын

@@kapilapatikiriachchige5169why not?

I have to do my front bearings now and your video gave me the confidence I need after the disastrous rears I did. Thank you!

@aaanton11

3 жыл бұрын

Thanks for the great comments👍🏻👍🏻🛠

This is a fantastic BMW wheel bearing video! by far the best on KZread really enjoyed it had to watch it two or three times!! well done mate!

@aaanton11

3 жыл бұрын

Glad you enjoyed it! Thanks for the great comments👍🏻👍🏻🛠

Good video as normal - as a mechanic myself I learn a lot from you -there’s a lot to be said for experience ! Cheers for the upload

@aaanton11

3 жыл бұрын

Glad you enjoyed it, its always good to see a job done before attempting it, you can assess where the sticky bit might be, and prepare yourself, Thanks Jon for the great comments👍🏻👍🏻🛠

What a brilliant clear concise video with really good audio with no witterings, brilliant..

@aaanton11

2 жыл бұрын

Glad you liked it! Thanks for the great comments👍🏻👍🏻🛠

I've watched a couple videos before yours and yours was the simplest/easiest way. Thank you.

@aaanton11

2 жыл бұрын

Glad it helped! Thanks for the great comments👍🏻👍🏻🛠

I watched this video so many times; i bought an impact gun (milwaukee too) ahah and the puller! i m about to start next week, im confident with this job because of you, thanks again. Hope you'll do more videos on bmw.

@aaanton11

3 жыл бұрын

You will love the Milwaukee, Thanks for the great comments👍🏻👍🏻🛠

Have watched many a video on how to replace wheel hub bearings on BMWs and without blowing smoke up your, well you understand, this is by far the best one in terms of clarity, tool needed and sizes of sockets etc, etc. Cheers 👍🍺

@aaanton11

3 жыл бұрын

Glad it helped, Thanks for the great comments👍🏻👍🏻🛠

I start to do this job last night but I gave up then I search on KZread for some videos now the special tools are in order waiting for them for next weekend to do this job thank you very much very good video

@aaanton11

3 жыл бұрын

Glad I could help, Great tools to have in the toolbox, Thanks for the great comments👍🏻👍🏻🛠

Your amazing mate. Just want to say thanks out here from the states.this video is spot on. I’ll be tackling this job myself thanks to this motivating video.

@aaanton11

2 жыл бұрын

Good Luck, Thanks for the great comments👍🏻👍🏻🛠

Best video that you work so well with full details from beginning to the end. I want to thank you and give you grade A+. Cheer up.

@aaanton11

2 жыл бұрын

You're very welcome! Thanks for the great comments👍🏻👍🏻🛠

Thoroughly enjoyed those last few seconds. Thanks for the video.

@aaanton11

3 жыл бұрын

Glad you enjoyed it Thanks for the great comments👍🏻👍🏻🛠

Brilliant execution sir! I get a real military vibe here, nicely done. Also thank you for making me feel good about the labor I will pay my mechanic to do this.

@aaanton11

2 жыл бұрын

Thanks for the great comments👍🏻👍🏻🛠

@jferrer9157

Жыл бұрын

Underrated comment

You make it look so easy!!!! 🤣 Best video on the process I've seen!!!! Hope mine goes this easy this weekend.

@aaanton11

2 жыл бұрын

You got this! Thanks for the great comments👍🏻👍🏻🛠

Great video mate, cheers. I'm about to attempt this on my 130i and this was a big help.

@aaanton11

3 жыл бұрын

Glad it helped, its the same job on the 130, let me know how you get on 👍🏻 Thanks Simon for the great comments👍🏻👍🏻🛠

Thanks very much for this video, it really was helpful and showed me a quicker way of doing this job, much appreciated and great work 👍👍

@aaanton11

3 жыл бұрын

Glad it helped, Thanks for the great comments👍🏻👍🏻🛠

I don't even need to change my wheel bearings but watched the whole video and gave amazon about £150 for tools I don't need. Top man, quality video 👍

@aaanton11

3 жыл бұрын

😂😂Thanks for the great comments👍🏻👍🏻🛠

Nice vid some really helpful tips I’m just doing the bearing on the nsr on my 123d but have to drop the exhaust but watched this and it pretty much shows you exactly what you got to do

@aaanton11

3 жыл бұрын

Glad it helped Thanks for the great comments👍🏻👍🏻🛠

Great job and thanks so much for this awesome video. Just replaced the wheel bearing on my E90 and watching this helped me a lot. Only thing I add is to make sure to remove the ABS sensor before pressing out the bearing. Mine got damaged and had to replace it. Thanks again.

@aaanton11

Жыл бұрын

Thanks for the great information👍🏻👍🏻🛠

Just replaced the rear wheel bearing on my E91 2009, this video helped a lot!

@aaanton11

3 жыл бұрын

Thanks for the great comments👍🏻👍🏻🛠

@saschakonrad8861

3 жыл бұрын

I just did then too in my 2008 E90 at BMW shop. They both pretty much failed in short order at 85,000 miles, way too early. Are your fronts still good too?

Dang! You are a Master mechanic, my friend. You make an extremely costly and difficult job very approachable to me. Ty

@aaanton11

2 жыл бұрын

you can do it, Thanks for the great comments👍🏻👍🏻🛠

@donaldarrabito6899

2 жыл бұрын

I started to do this job and it seems like my 2016 328I X Dr. sedan does not have the E 12 bolts holding the axel shaft to the differential. Is there another method of doing this without removing the whole knuckle? If so can I do it with their bearing splitter and removal tool as described in your video. Ty Don

Your initial raising and support work is exactly what I do with my E21. I do stack the tyres under the spare tyre well in the back as extra insurance for not dropping down on me. The rear bearing work is a bit tedious but not too bad. Thanks for this!!

@aaanton11

Жыл бұрын

Thanks for the great comments👍🏻👍🏻🛠

I really like the 'slow-tutorial' style, thanks for your effort!

@aaanton11

3 жыл бұрын

You're very welcome! Thanks for the great comments👍🏻👍🏻🛠

Thanks mate very helpful. One of the best video how to remove the wheel bearing, keep up the good work, thanks

@aaanton11

6 ай бұрын

Glad it helped Thanks for the great comments👍🏻👍🏻🛠

Excellent tutorial!!! I really appreciate how you took your time and showed each step, not editing out any difficult areas like so many do, leaving the viewer bewildered as to how it happened... I'm in the states, so we'll see if I can get the same tools off our Amazon. Thanks again for a great video. I've subscribed, which I don't do too often with most channels, but you've earned it. Cheers!

@aaanton11

Жыл бұрын

Glad you enjoyed it! Thanks for the great comments👍🏻👍🏻🛠

Brilliant video- ABS ring problem on my E88, this video has helped alot

@aaanton11

3 ай бұрын

Thanks for the great comments👍🏻👍🏻🛠

Great, smart job. No knocking, no rush. Excellent.

@aaanton11

2 жыл бұрын

Glad you liked it Thanks for the great comments👍🏻👍🏻🛠

@VassiliySmith

2 жыл бұрын

@@aaanton11 but this kit is not suitable for E92 328i xDrive 2013. There are rear bearing 84mm, and the largest cup from that toolset is 84-85mm inner diameter. So to remove bearing from hub i've used hub itself and 5 long bolts.

I started watching this video and it was almost comical at first because I did the same job on a 2007 X3. The truck came from the rust belt in the US and was no where as easy as you made it look. A friend of mine helped and smashed the axle with a sledge hammer mushroomed the axle. Then putting it back on banged in the end of the axle ruining the axle. I repaired it and changed the abs ring which was causing a whole host of problems on a awd anyway. The only thing I did differently was take the brakes off with the 2 15 mm bolts and not separate them. Installed the hub with the large bearing cup because it’s more stable and goes in straighter. I used a very long socket adapter and removed the e12 bolts on axle inner outside the car top of shaft the boot don’t get in the way and used a friend whose nickname is now Hammer. Great video!

@aaanton11

3 жыл бұрын

Thanks for the great information👍🏻👍🏻🛠

Thank you for giving me the confidence to take on this project!

@aaanton11

2 жыл бұрын

Thanks for the great comments👍🏻👍🏻🛠

@stewartfarrow4259

Жыл бұрын

What size was the splitter that was used as not sure which to get. Cheers

Extraordinary detail ! Super helpful !! I learned lots !!! Thanks mate . 👊🏼 🔥

@aaanton11

3 ай бұрын

Glad you liked it! Thanks for the great comments👍🏻👍🏻🛠

Good job pal! I’m due to do the wheel bearings and new brake backing plates and handbrake shoes on my e46 once we get some good weather.

@aaanton11

3 жыл бұрын

Yes all the same, Thanks for the great comments👍🏻👍🏻🛠

Great job , nice tool list ,bearing splitter is a good one ,nice explanations too thanks

@aaanton11

Жыл бұрын

Glad you liked it! Thanks for the great comments👍🏻👍🏻🛠

Great work man! Your video helped me a lot with tool choice. Went to do this yesterday on my 3 series GT and since my diff is different type the axles don’t go out, I dismanteled the hand brake and took down the whole wheel bearing housing. It was not that big of a deal actually, 4 more bolts plus the handbrake cable and you are off. It was much easier doing the bearing removal and install on a table and with a vice.

@aaanton11

6 ай бұрын

Nice work! Thanks for the great comments👍🏻👍🏻🛠

Excellent tutorial & tool ref. Thanks!

@aaanton11

Жыл бұрын

Glad it was helpful! Thanks for the great comments👍🏻👍🏻🛠

Super tutoriel sa m'a beaucoup aider merci Merci d avoir pris le temps pour nous montrer

@aaanton11

2 жыл бұрын

Thanks for the great comments👍🏻👍🏻🛠

Great video easy to follow and very informative.

@aaanton11

3 жыл бұрын

Thanks for the great comments👍🏻👍🏻🛠

All time well spend. Great training tutorial 👍👏👌

@aaanton11

11 ай бұрын

Glad you enjoyed it Thanks for the great comments👍🏻👍🏻🛠

great video and you've helped me a few times :) and helping me again thanks fella

@aaanton11

Жыл бұрын

Glad to help, Thanks for the great comments👍🏻👍🏻🛠

Thanks chief for the well-detailed step by step video

@aaanton11

2 жыл бұрын

No problem 👍 Thanks for the great comments👍🏻👍🏻🛠

Best video so far !

@aaanton11

3 жыл бұрын

Glad you think so! Thanks for the great comments👍🏻👍🏻🛠

Brilliant brilliant brilliant. Thank you so much for this.

@aaanton11

2 жыл бұрын

Thanks for the great comments👍🏻👍🏻🛠

Awesome video!! Cheers from Chicago 😎

@aaanton11

3 жыл бұрын

Glad you enjoyed it! Thanks for the great comments👍🏻👍🏻🛠

Thank you very much for this video, you made a really helpful video Great I appreciate you a lot and great work 👍👍 🛠

@aaanton11

2 жыл бұрын

Glad it was helpful! Thanks for the great comments👍🏻👍🏻🛠

Great tutorial. I was scared to tackle this job and was being charged too much to have someone else do it. After watching this video, I feel confident that I will never have to pay to have wheel bearings replaced. Thank you for taking the time do make this video. Absolutely one of the best videos on KZread for this particular task.

@aaanton11

3 жыл бұрын

Thanks really appreciate your comments,👍🏻👍🏻🛠

Excellent video, really very usefull indeed. Tackling mine later. Cheers

@aaanton11

3 жыл бұрын

Glad it helped, Thanks for the great comments👍🏻👍🏻🛠

Great work sir. Nicely done. ✌️

@aaanton11

2 жыл бұрын

Thanks for the great comments👍🏻👍🏻🛠

Brilliant video tutorial. Thanks!

@aaanton11

2 жыл бұрын

Thanks for the great comments👍🏻👍🏻🛠

Excellent, you certainly know your stuff 👍

@aaanton11

3 жыл бұрын

Thanks Mark for the great comments👍🏻👍🏻🛠

Thank you, sir. You just saved me 1700$ 👍🏼

@aaanton11

3 жыл бұрын

Glad I could help! Thanks for the great comments👍🏻👍🏻🛠

Excellent video, thank you so much.

@aaanton11

3 жыл бұрын

Glad it was helpful! Thanks for the great comments👍🏻👍🏻🛠

I really liked this one! Nice and thorough. The only thing I would like to see walls torque settings. Especially the center nut very often have surprisingly light torque setting. Cool to see you are doing this with very basic tools in your driveway. Just like me.

@aaanton11

3 жыл бұрын

I Don't get hung up on torque settings its more about feel, Thanks for the great comments👍🏻👍🏻🛠

@coynor1

Жыл бұрын

I agree on the torque specs. The center axle nut could wear out the bearing prematurely if over torqued. It’s hard to get a feel with an impact lol. Also I would recommend a medium “blue” grade Loctite on the 6 axle torx bolts along with the brake caliper bracket to hub also torque to spec. All in all Great video!!!

Nice job on the video. Thank you!

@aaanton11

Жыл бұрын

Glad you liked it! Thanks for the great comments👍🏻👍🏻🛠

Excellent video.... Superbly explained.👍

@aaanton11

3 жыл бұрын

Glad you liked it Thanks for the great comments👍🏻👍🏻🛠

Nicely done! Thank you!

@aaanton11

2 жыл бұрын

Glad you liked it! Thanks for the great comments👍🏻👍🏻🛠

So far the best video thanks sir

@aaanton11

10 ай бұрын

Glad you liked it Thanks for the great comments👍🏻👍🏻🛠

Many thanks dude, learned a lot

@aaanton11

2 ай бұрын

Glad it helped! Thanks for the great comments👍🏻👍🏻🛠

Really good video I learn a lot thank you very much.

@aaanton11

Жыл бұрын

Thanks for the great comments👍🏻👍🏻🛠

Great video, great tools, need to get all that👍

@aaanton11

3 жыл бұрын

Thanks for the great comments👍🏻👍🏻🛠

Terrific video!!! Thank you!!

@aaanton11

Жыл бұрын

You are so welcome! Thanks for the great comments👍🏻👍🏻🛠

Great stuff mister, noting that type of bearing with 2 part inner race are loose by design until tightened (around 9:50 in) apart from that almost inconsequential point, excellent tutorial! :D Just trying to save someone a load of work if they're only changing the shaft, as it'll feel floppy soon as the nut is undone if inner races haven't stuck to the hub. If you have the bearing removal kit, always worth doing the bearing when changing the drive shaft anyway. Keep up the great work, inspiring me to upload a video of my own some day.

@aaanton11

3 жыл бұрын

You Should Try, Thanks for the great information👍🏻👍🏻🛠

Your content is quality keep it

@aaanton11

Жыл бұрын

Always Thanks for the great comments👍🏻👍🏻🛠

Really useful video top quality!

@aaanton11

3 жыл бұрын

Thanks for the great comments👍🏻👍🏻🛠

hello it was a good help to remove bearing bwm 3 e36 325 all i liked a hug keep going

@aaanton11

Жыл бұрын

Glad it helped Thanks for the great comments👍🏻👍🏻🛠

Nice job Sir I'm impressed

@aaanton11

3 жыл бұрын

Thank you very much!

Great video thanks. Going to do mine. Half the stuff is not in in amazon, so sourcing similar tools

@aaanton11

3 жыл бұрын

Glad it helped, Thanks for the great comments👍🏻👍🏻🛠

Excelent video, you make it look so easy, you don’t even get dirty, thanks again for teaching us how to do it and what tools to use 👍

@aaanton11

2 жыл бұрын

Its a Pleasure Thanks for the great comments👍🏻👍🏻🛠

Great Video. 10/10. now to head out and do the E36. Cheers

@aaanton11

2 жыл бұрын

good luck Thanks for the great comments👍🏻👍🏻🛠

Great video Thanks it was a life saver

@aaanton11

Жыл бұрын

Thanks for the great comments👍🏻👍🏻🛠

I like your jack ,i have the older model ,i was an AA patrol 10 years ago

@aaanton11

3 жыл бұрын

Thanks Alan, its a great jack, Thanks for the great comments👍🏻👍🏻🛠

Lovely video, thank you!

@aaanton11

7 ай бұрын

Glad you enjoyed it! Thanks for the great comments👍🏻👍🏻🛠

buenisimo el video te felicito, 10 estrellas

@aaanton11

3 жыл бұрын

Thanks for the great comments👍🏻👍🏻🛠

Great video that shows how to do it! Might have to do this on my 118d to soon. Btw, the nut on the driveshaft should be torqued to 145 nm + 45 degrees according to Bmw specs (for the driveshaft thats M24). 🙂

@aaanton11

Жыл бұрын

Thanks for the great information👍🏻👍🏻🛠

@jptrainor

Жыл бұрын

He used the German gut-und-tight spec.

@Alpejohn

Жыл бұрын

@@jptrainor I use that spec often my self, but on some things i prefer to have it to bmw spec. Specially bearings etc wher to tight can wear it out faster. Not sure if that actually can happen with this type of bearings but non the less.. 🙂

@jptrainor

Жыл бұрын

@@Alpejohn Yes. Me too. I like my torque wrenches and factory service manual to earn their keep. Gut-und-tight seems to be very popular despite our preference.

Thank you

@aaanton11

2 жыл бұрын

You're welcome Thanks for the great comments👍🏻👍🏻🛠

Really fantastic!! you do really make life easier for us ;) Cheers

@aaanton11

21 күн бұрын

Happy to help! Thanks for the great comments👍🏻👍🏻🛠

Good job. Good tip I came across for getting the race off is to put a socket in a vice, put the hub on the socket, heat the race with oxy or map and it just drops off. No more cutting them off (to be fair that one came off easy with the puller...get a lottery ticket quick)

@aaanton11

3 жыл бұрын

great tip, I was well chuffed when it pinged off, the splitter is staying in my tool box 😂 Thanks for the great comments👍🏻👍🏻🛠

Great video thank you just ordered few tools and wheel bearing. Looking forward doing it. My bearing making similar sound and going over cat eyes makes metallic sound, have no play in wheel, brakes all ok

@aaanton11

14 күн бұрын

Are the hand brake shoes ok? had a issue with this job kzread.info/dash/bejne/mG2B0Lizk5jbgbA.html Thanks for the great comments👍🏻👍🏻🛠

@drew6090

14 күн бұрын

@@aaanton11 yes put new clips and springs in place no difference. Did apply handbrake on going along made no sound difference.

Perfekt gemacht👍

@aaanton11

2 жыл бұрын

Thanks for the great comments👍🏻👍🏻🛠

Good job men!!!!

@aaanton11

Жыл бұрын

Thanks for the great comments👍🏻👍🏻🛠

it's like a real job this

@aaanton11

3 жыл бұрын

Its not too bad if you have the puller, Thanks for the great comments👍🏻👍🏻🛠

good work mate

@aaanton11

Жыл бұрын

Thanks for the visit, Thanks for the great comments👍🏻👍🏻🛠

thanks nice info

@aaanton11

3 жыл бұрын

No problem! Thanks for the great comments👍🏻👍🏻🛠

I dont even need wheel bearing replacements i just need the little hub off due to snapping the lug nut in half so this was helpful gonna start it in a week or 2

@aaanton11

Жыл бұрын

You will need a new bearing, as it will split when you remove it damaging the seals, they are not expensive, Thanks for the great comments👍🏻👍🏻🛠

Good work!!!! but at the same time very hard work as well!!

@aaanton11

10 ай бұрын

That's true! Thanks for the great comments👍🏻👍🏻🛠

어느나란진 모르지만 자가정비 잘봣어요.우리나란 wd40흔하게 쓰는데 없는 상황도 있네요 잘 정비하지만 시계차고 하는거 ㅎㅎㅎ 잼나네요

@aaanton11

Жыл бұрын

Thanks for the great comments👍🏻👍🏻🛠

Nice job Sir I'm impressively

@aaanton11

3 жыл бұрын

Thanks for the great comments👍🏻👍🏻🛠

Great vid!! I love your accent and when you said, “whoa, she’s tight!”

@aaanton11

2 жыл бұрын

Glad you enjoyed😂, Thanks for the great comments👍🏻👍🏻🛠

Boys, do not fuck up anything, its aint that easy, he just make it look easy, if ur kinda guy who gives up after having bolts stuck then just dont do it. And goodvideo man, as a mechanic u learned me alot today!

@aaanton11

2 жыл бұрын

Thanks for the great comments👍🏻👍🏻🛠

When removing the back disk brakes, I found slacking the handbrake pin in the wheel off and came off easy. Great video though

@aaanton11

2 жыл бұрын

Good tip! Thanks for the great comments👍🏻👍🏻🛠

Great video and interesting to watch. Only comment I would make is to tighten those various nuts using a torque wrench. Those electric impact wrenches impart a MASSIVE amount of torque and it is super easy to over tighten bolts, particularly the main axle and the wheel studs!!!

@aaanton11

2 жыл бұрын

Thanks for the great information👍🏻👍🏻🛠

nice video tutorial

@aaanton11

3 жыл бұрын

Many many thanks, & Thanks for the great comments👍🏻👍🏻🛠

Awesome! Do more videos 👍

@aaanton11

5 ай бұрын

I am have you watched this series on replacing the broken the timing chain, kzread.info/dash/bejne/iXaByKixqaungaQ.html Thanks for the great comments👍🏻👍🏻🛠

@squeakycrypto8323

5 ай бұрын

Not yet but I will do 👍 reminds me of ed china and the good old wheel dealers shows when they first started.

fantastic video, but don't forget of course if you don't use the right torque to tighten the wheel bearing bolts it will break more faster so I recommend 140 torque.

@aaanton11

Жыл бұрын

Thanks for the great information👍🏻👍🏻🛠

thank bro, now I know how to do it !

@aaanton11

3 жыл бұрын

Glad I could help Thanks for the great comments👍🏻👍🏻🛠

Thanks for the detailed tutorial. Definitely something I could tackle at home but for me the cost of some of the tools I’d need vs paying my mechanic to do it doesn’t justify it. I understand tools will be there for next time but I wouldn’t use them often enough.

@aaanton11

Жыл бұрын

Glad it was helpful! Thanks for the great comments👍🏻👍🏻🛠

@StickyPlasters

Жыл бұрын

Instead of paying the mechanic, buy tools you need. I've built up basically every tool I need for mine and the family / friends to use. Rarely need to buy something now for a job

Thank you, stumbled upon your channel when you fixed the squeaky suspension that I had too :) Am about to change the rear drive axle because of the ABS-ring, and was a little worried how to get the axle back into the hole(?), but seems like it was just to push it in according to this video, Makes the fix seem much do-able.

@aaanton11

3 жыл бұрын

the hardest bit will be undoing the drive shaft nut, it will be tight Thanks for the great comments👍🏻👍🏻🛠

👍👍best I have aver seen 💯out 💯

@aaanton11

Жыл бұрын

Thanks for the great comments👍🏻👍🏻🛠

super merci pour cette video 👍👍👍👍

@aaanton11

7 ай бұрын

Thanks for the great comments👍🏻👍🏻🛠

Great video. Tip for next time, use a blow torch to remove the bearing race, it'll literally fall straight off after a few seconds of heat. A lot easier than using the bearing splitter

@aaanton11

Жыл бұрын

Thanks for the great information👍🏻👍🏻🛠

Great.

@aaanton11

2 жыл бұрын

Thanks for the great comments👍🏻👍🏻🛠