Love the speed bleeder advice. I would like to add. Get three bleeder bags. Speeds up the process and less mess. Great job sir!
@PacMoto
2 жыл бұрын
That’s a good idea. That would save you from moving the bleeder bag from brake to brake.
@amkaplan2 жыл бұрын
When it says to activate the brakes, what do they want - both hand levers and foot at the same time, or what? Thanks!
@PacMoto
2 жыл бұрын
The GS-911 walks you through the process. You basically are working on one brake at a time. When it’s time to activate that brake, you pull in and release the brake multiple times in a short time period. The GS-911 tells you how long to operate each brake. I hope this makes sense. Thanks for the question and have fun with the brake fluid flush!
@geneg63432 жыл бұрын
Great video.
@PacMoto
2 жыл бұрын
Thanks for your comment!
@DanPaulDrums Жыл бұрын
Do you recommend Nordstrom T shirts for brake fluid rags, or is Calvin Klein okay?
@PacMoto
Жыл бұрын
Haha usually Neiman Marcus shirts! I’m sure a Calvin Klein will suffice. By the way, I own none of the above!
intructive and well done. Why does an RT need the the atv permit?
@PacMoto
6 ай бұрын
Thanks for the feedback. The off-road permit is on the GS. It’s needed to ride in certain areas.
@DoubleVADV2 жыл бұрын
Great video thank you! Can this be completed without the GS 911. Or is that necessary for the abs?
@PacMoto
2 жыл бұрын
The GS-911 allows you to actuate the ABS pump. I’m told that you can also use the Motoscan app with a generic OBD device. I recall a good write in the BMW MOA magazine earlier this year.
@moonrunrs
Жыл бұрын
@@PacMoto I have the motoscan unit and app. I want to see if it's possible to do with this.
@timothy4375 Жыл бұрын
Hi, Another question. At 9:30 in, rear reservoir is filled but cap is left off, then proceed to pump front brakes. Since front brake lever works both front and rear brakes, is there any “fluid burping up”, and should rear reservoir cap be on to prevent splashing? Thanks again.
@PacMoto
Жыл бұрын
No, no splashing or burning. I left it off because you need to add fluid throughout the process. Thanks for the comment!
@frbaluch15 ай бұрын
Similar process and similar bleeder sizes on the 1250GS I assume?
@PacMoto
5 ай бұрын
Yes, identical. I have a 1250 brake bleed video coming out in a few weeks. But, yes, same same.
@frbaluch1
5 ай бұрын
thanks! Will keep a look out for the new video. My first brake bleed is due and want to learn so hoping to do it myself. @@PacMoto
@PacMoto
5 ай бұрын
@frbaluch1 Ok cool. I’d suggest ordering the Speed Bleeder valves. I assume you have a GS-911 too. The video will come out 4/2.
@frbaluch1
5 ай бұрын
@@PacMotoin the market for the Gs911. Need it badly since I also need to reset the service minder from the first service that I also performed myself.
@PacMoto
5 ай бұрын
@frbaluch1 Maybe you can find someone in your local club that will lend you one.
@adv_jaco78832 жыл бұрын
Do you need to flush again after the second abs activation with the 911? I remember doing something similar with my Super Tenere and you needed to flush again after activating the abs pump because you might still have some residual bubbles and old brake fluid now in the brake lines. I have an RT now and need to learn how to do it. Thanks for the video!
@PacMoto
2 жыл бұрын
Thanks for the comment. The GS-911 software walks you through the process on exactly what needs to be done. In my opinion, it’s the Speed Bleeders that really make the job easy!
@timothy4375
Жыл бұрын
@@PacMoto Hi, From the question asked above re; “residual old brake fluid in the brake lines.”, any thought on how much old fluid is released from ABS pump that would be mixing into the fresh fluid? Thanks again.
@timothy4375 Жыл бұрын
A question related to one posted below 4 months ago re; “residual old brake fluid in the brake lines.”, any thought on how much old fluid might be released from ABS pump mixing into the system of freshly flushed fluid? Thanks again.
@PacMoto
Жыл бұрын
It’s a good question but I really have no idea…. Thanks for the comment.
@edsyphan34252 жыл бұрын
That bleeder bag was new to me. Who makes it?
@PacMoto
2 жыл бұрын
I got the bag along with the valves from speedbleeder.com.
@itdoesntmatter2670 Жыл бұрын
Help please! Without noticing I went below the minimum level bleeding front brakes. Front brakes now won't work. What can be done besides take it to the dealer?
@PacMoto
Жыл бұрын
You’re okay - just keep bleeding the brakes until you flush out all the air (making sure to keep the reservoir full). If you need more help drop me an email at kurt@pacmototours.com and I can discuss with you over the phone.
@itdoesntmatter2670
Жыл бұрын
@@PacMoto Thanks so much! I got it working, it wasn’t bleeding either. I used a syringe with some tubing on the nipples and sucked the fluid and the air bubbles. It works perfect now. Your videos are really helpful!
@PacMoto
Жыл бұрын
Great news!!
@timothy4375 Жыл бұрын
Sorry; iPad error. “just leave them in place”?
@PacMoto
Жыл бұрын
Just leave them in place. It makes for easy bleeding in the future.
Пікірлер: 39
Love the speed bleeder advice. I would like to add. Get three bleeder bags. Speeds up the process and less mess. Great job sir!
@PacMoto
2 жыл бұрын
That’s a good idea. That would save you from moving the bleeder bag from brake to brake.
When it says to activate the brakes, what do they want - both hand levers and foot at the same time, or what? Thanks!
@PacMoto
2 жыл бұрын
The GS-911 walks you through the process. You basically are working on one brake at a time. When it’s time to activate that brake, you pull in and release the brake multiple times in a short time period. The GS-911 tells you how long to operate each brake. I hope this makes sense. Thanks for the question and have fun with the brake fluid flush!
Great video.
@PacMoto
2 жыл бұрын
Thanks for your comment!
Do you recommend Nordstrom T shirts for brake fluid rags, or is Calvin Klein okay?
@PacMoto
Жыл бұрын
Haha usually Neiman Marcus shirts! I’m sure a Calvin Klein will suffice. By the way, I own none of the above!
@DanPaulDrums
Жыл бұрын
@@PacMoto Lies!!! kzread.info/dash/bejne/X4F4r9lpYpTag6w.html LOL. That's definitely nordstrom.
intructive and well done. Why does an RT need the the atv permit?
@PacMoto
6 ай бұрын
Thanks for the feedback. The off-road permit is on the GS. It’s needed to ride in certain areas.
Great video thank you! Can this be completed without the GS 911. Or is that necessary for the abs?
@PacMoto
2 жыл бұрын
The GS-911 allows you to actuate the ABS pump. I’m told that you can also use the Motoscan app with a generic OBD device. I recall a good write in the BMW MOA magazine earlier this year.
@moonrunrs
Жыл бұрын
@@PacMoto I have the motoscan unit and app. I want to see if it's possible to do with this.
Hi, Another question. At 9:30 in, rear reservoir is filled but cap is left off, then proceed to pump front brakes. Since front brake lever works both front and rear brakes, is there any “fluid burping up”, and should rear reservoir cap be on to prevent splashing? Thanks again.
@PacMoto
Жыл бұрын
No, no splashing or burning. I left it off because you need to add fluid throughout the process. Thanks for the comment!
Similar process and similar bleeder sizes on the 1250GS I assume?
@PacMoto
5 ай бұрын
Yes, identical. I have a 1250 brake bleed video coming out in a few weeks. But, yes, same same.
@frbaluch1
5 ай бұрын
thanks! Will keep a look out for the new video. My first brake bleed is due and want to learn so hoping to do it myself. @@PacMoto
@PacMoto
5 ай бұрын
@frbaluch1 Ok cool. I’d suggest ordering the Speed Bleeder valves. I assume you have a GS-911 too. The video will come out 4/2.
@frbaluch1
5 ай бұрын
@@PacMotoin the market for the Gs911. Need it badly since I also need to reset the service minder from the first service that I also performed myself.
@PacMoto
5 ай бұрын
@frbaluch1 Maybe you can find someone in your local club that will lend you one.
Do you need to flush again after the second abs activation with the 911? I remember doing something similar with my Super Tenere and you needed to flush again after activating the abs pump because you might still have some residual bubbles and old brake fluid now in the brake lines. I have an RT now and need to learn how to do it. Thanks for the video!
@PacMoto
2 жыл бұрын
Thanks for the comment. The GS-911 software walks you through the process on exactly what needs to be done. In my opinion, it’s the Speed Bleeders that really make the job easy!
@timothy4375
Жыл бұрын
@@PacMoto Hi, From the question asked above re; “residual old brake fluid in the brake lines.”, any thought on how much old fluid is released from ABS pump that would be mixing into the fresh fluid? Thanks again.
A question related to one posted below 4 months ago re; “residual old brake fluid in the brake lines.”, any thought on how much old fluid might be released from ABS pump mixing into the system of freshly flushed fluid? Thanks again.
@PacMoto
Жыл бұрын
It’s a good question but I really have no idea…. Thanks for the comment.
That bleeder bag was new to me. Who makes it?
@PacMoto
2 жыл бұрын
I got the bag along with the valves from speedbleeder.com.
Help please! Without noticing I went below the minimum level bleeding front brakes. Front brakes now won't work. What can be done besides take it to the dealer?
@PacMoto
Жыл бұрын
You’re okay - just keep bleeding the brakes until you flush out all the air (making sure to keep the reservoir full). If you need more help drop me an email at kurt@pacmototours.com and I can discuss with you over the phone.
@itdoesntmatter2670
Жыл бұрын
@@PacMoto Thanks so much! I got it working, it wasn’t bleeding either. I used a syringe with some tubing on the nipples and sucked the fluid and the air bubbles. It works perfect now. Your videos are really helpful!
@PacMoto
Жыл бұрын
Great news!!
Sorry; iPad error. “just leave them in place”?
@PacMoto
Жыл бұрын
Just leave them in place. It makes for easy bleeding in the future.
@timothy4375
Жыл бұрын
@@PacMoto
@timothy4375
Жыл бұрын
Thanks, got it.