Will the automatic transmission gear/shift to all gear when you do a standalone ? Or do i need abs/speedsensor ? :)

@Martink9191

2 жыл бұрын

I dont know. I used manual transmission. But I I assume for correct shifting you need speed input.

Is it normal to crank that long for more than 20seconds for the first start? I tried to start my m57 dde6 but didn't work. But I didn't crank that long. At most 7-8 seconds.

@Martink9191

3 жыл бұрын

injection system was empty for me. It took some time to get rid of all air and develop fuel presure. it needs 250bar at least, to start the engine. 330bar is at idle. If you have exsessive return flow leak etc, you may never start the engine.

What pump did you use for start up im getting a problem starting mine tried similar to your set up is that just a drum feed and return then a inline pump

@Martink9191

2 жыл бұрын

You mean electric pump? I used original pump from e6x, just pump's shell is removed and only pump itself is in the bucket. And yes feed and return line is just guided to bucket. Is your immo removed?

@jasonwebster1935

2 жыл бұрын

@@Martink9191 my problem I's fuel related im sure basically done the same as you and yes ews delete

@Martink9191

2 жыл бұрын

@@jasonwebster1935 be shure that feed pipes are correctly connected to hight presure pump.

Hello. How did you get around the immobilizer?

@Martink9191

5 жыл бұрын

With immo emulator. It was'nt cheap.

@edgarscelms5306

5 жыл бұрын

omg

what ecu did you use apart from the ekp mdule

@Martink9191

5 жыл бұрын

dphothisane original ecu was overwritten. And some other mods, like dpf and egr delete, atm to manual programming etc.

@thinusprinsloo2112

2 жыл бұрын

@@Martink9191 how did you do the ecu change

@Martink9191

2 жыл бұрын

@@thinusprinsloo2112 with my two hands

tervist! mul endal sama projekt käsil, teise kere peal m57 tööle panemine, juhtmestikus on arusamatud kohad, mis kuhu läheb, kas juhtmestiku diagrammi saaksite jagada. Mul mingi juhtmestik millel ews jne asjad sees võtmest käib mootor ringi aga käima ei taha minna. Küsimus siis et kas saaksite jagada lihtsustatud juhtmestiku diagrammi, et saaksin asja käima! Tänan

@Martink9191

5 жыл бұрын

Soovitan tõmmata BMW WDS, seal on kuni 2007aastani kõik skeemid olemas. alates 96aastast. Käima saamiseks on vajalik kas win xp või virtual machine, milles xp. Kui hakkama ei saa, kirjuta uuesti.

@Martink9191

5 жыл бұрын

Ühe asja unustasin ära. Kuigi WDS on hulga parem, siis pm sama asi on ka www.newtis.info/ Pm tegemist ongi wds programmi sisuga, aga mis on vähe teistel alustel puuse jaotatud. isiklikult neti vesioon ei meeldi, kuna liikumine on äärmiselt tülikas.

@karl-gustavhanikat8885

5 жыл бұрын

@@Martink9191 tänud, proovin