You should rebuild the vanos aswell jimmy my guy. Not hard to do makes a world of drifference

@MRRenato2403

6 жыл бұрын

Nathan Clemence this comment needs more likes so jimmy can see this!!!

@osrs_sui

6 жыл бұрын

Bump.

@lordperezident

6 жыл бұрын

Drake Holmes the "bump" doesn't work lol but I'll double bump just because

@ryanolson6794

6 жыл бұрын

Should’ve welded the oil pump nut too, hopefully he sees these comments!

Great coverage of all the work you do to get a nice trouble free engine prep. Truly you care about your work.

Jordan is kind of slow at responding but the dude is a one man show over at RKTunes. Big shoutout to that guy getting my s52 dialed in. Great job picking him up Jimmy 👍🏼.

@wobblysauce

6 жыл бұрын

Kind of slow, getting asked questions by a lot of people, sorta does that.

@Revo900

6 жыл бұрын

wobbly sauce Yes, which is why I also mentioned it’s a one man show. I get he’s working hard but that doesn’t change the fact that it’s a slower service than usual. It’s better warning people before they get his product than not knowing and bitching about it.

@RKTUNES

6 жыл бұрын

Hey thank you for the kind words, we try and respond as fast as we can but we are extremely busy and do apologize for any delays!

@Revo900

6 жыл бұрын

RKTUNES see they’re awesome! 👆🏽

Dude, try SHOUT liquid laundry detergent on your engine and engine bays. It will change your life. Plus, it wont etch your aluminum. Also, it works fantastic to clean dirt bikes, ATV's, SxS etc. When I lived in Florida not much could get all that orange clay off my Scrambler 850XP. A guy at the local MX track put me on the shout bandwagon. Try it.. DOOO IIIIITTT!!!

Yay more content continuously has been good

1:10 am in Australia and I stay up to see the vids he is for sure my favourite car youtuber cause he show the entire process. It’s pretty inspiring to do this myself

@TheCarty1986

6 жыл бұрын

Gday to my fellow Aussie ✌

RJay gives Jimmy all those pig mats.... uses shop rags for coolant spill lol..

Early uploads are the best uploads. Starting the work day proper. #JimmyOClock

Jimmy should heart this cus I love his taste in cars and swaps/mods

Keep it up Jimmy. Always loving the content.

Jimmy didn't drop the spark plug??Haha 😂!!Keep up the good work

Always have loved your positive attitude. Makes everything more enjoyable to watch. You’re a genuinely good guy Jimmy, never change a thing! Love all your videos. I watch you, rudnik and tommy every single day. You guys are the best, dude. Can’t wait for more awesome content!

Loved this video, as a 325 vanos owner I found it interesting and you learned a lot from not nowing anything about bmws as you said not so long ago :)

@MrSpacely131

6 жыл бұрын

Gonzalo what’s up man cool name 😂

@gonzalo4307

6 жыл бұрын

What up dude hahah

Never stop making videos, much love from new jersey

@szymon6207

5 жыл бұрын

Do you s54 needed ?

I subb to jimmy because of his 240 vidoes , but these bmw lil series is dope asf’! Jimmy is a car goddess keep it up jimmy!!!!

Awesome video love watching these builds and what you do is great! I’m from Massachusetts and really enjoy these videos

So glad you went with the n52. I think this is a great move. I had a 328 with that motor and had 0 issues with it. Although not boosted still very reliable.

Hey Jimmy, I am loving the new music score for your out trow (closing credits): I am not bitter!!😀. Keep up the great videos with solid informative content. You are definitely providing a BOOST of encouragement to the in the car scene in the New England region. Also I can not get enough of Be-Haul, skilled, funny, and likeable. Keep it up.

go to Japan with Adam next time he goes pls

Keep up the good work jimbo

jimmy you should buy some oven cleaner & give the engine block a spray let it sit for like 30 mins & presser wash off it will clean it like new!!!

@abrahammena2869

6 жыл бұрын

I was just thinking that! I use easy off at work to clean 15yr old burners, comes out looking fresh affff. But be careful! It burns skin, don’t ask me how I know that loool.

Smashed it ten times!!

Loving the Beamer content jimmy👌🏻

Laughed so hard at the short clip of you kicking the saturns door shut, thats great hahah

Jimmy ! i cant say it enough but your friends are super funny. especially B Hall , and Drewtube hahahah keep up the good work. RELEASE NEW MERCH

Jimmy always has fantastic videos. Everything he owns is dumb clean 👌🏼

1:25am here in Aus :) Still watching this all. Keep it up :)

Thanks for the great content man 🤟🏼 e36 bros

Jimmy great video as always, also m50 motor has vanos. They made that port for a reason on m50

7:50 How much is 15 Torque-pounds? Lol love your vids Jimbo

The way Jimmy wears his hat makes it look like it could have it's own gravitational pull cuz how big the bill looks lol

This hella good content right now for me because im copping a 98 m3 and since jimmy shows everything im less scared to buy one

More e36 videos 🔥🔥

The amount of times ive watched the old E36 series vids are crazy

i just changed my power steering pump and it works great, holllla

As soon I was going to comment to change the oil filter housing gasket, Jimmy says okay I'm changing going the gasket on the oil filter housing. Low key was like good man good man😂😂 but also one other thing you can do to the engine is check every hose for vacuum leaks, BMWs are KNOWN for having issues with cracked vacuum hosew

Don't you love buying gaskets? So many gaskets !!!!

I wish I had a Bobby G in my life!!!!

@patriciaoakes4686

6 жыл бұрын

WE DO LOVE BOBBY G!!!

Bobby’s sc is so 🔥

Should put that m50 in the cappuccino lol thing would be the fastest car in the garage

@6lacknaruto81

6 жыл бұрын

Kyle Glenn that would be nuts

@kyleglenn4893

6 жыл бұрын

6lack Naruto lol if it happened I would prolly poo myself

@lothar_8615

6 жыл бұрын

i'd shit myself if the engine would fit it's enormous compared to that 3 cylinder

I ducks with channel heavy ❤

I recommend oven cleaner when cleaning grease off of engines just be careful with aluminum if you leave it on to long it can pit it

@imnota

6 жыл бұрын

Would wheel cleaner be a good idea ? I think it would work, it's the first thing that came to my mind, but not sure if it would work...

@KasamS

6 жыл бұрын

IMNOTA i dont know if it would do damage but its made for removing the protective oil thats on brake rotors so it'll clean it

@imnota

6 жыл бұрын

Kasam I was talking about wheel cleaner, not brake cleaner, I wouldn't use brake cleaner because it might eat plastic stuff and wires and shit like that, but from what I've heard it depends of the brake cleaner and the type of plastic. I was talking about the stuff that comes in spray bottles to clean dirty wheels...

Bro. I've been waiting for this since the ls swap 😂

Tommy zinc plated under the valve cover that’s why it’s gold.

Hullo Jimmy... U should get a bigger woodruff key on da BMW crank pulley.. Alberto big boost has endless grief with his one. 👍 😊 ✌ 👌.. Yr channel's always rocking bro.. Keep pumping da awesome content..🔥

so r u gonna get a replacement oil housing gasket? the fit was... interesting

Even though I like 325 better than 328, probably because Europe.. I respect the choice and I'm just as pumped for the videos. Hahah :)

@imnota

6 жыл бұрын

I'm european and liked 325i better than 328i, but after learning more about m50's and m52's, I definitely changed my mind. 328i = Low end torque for days.

@lordperezident

6 жыл бұрын

IMNOTA I don't know anything about BMWs. Is the m50 I'm 325 and m52 328? Which is a better platform for drifting?

@fernandoilroso

6 жыл бұрын

Blanco Escondido m50. More reliable and hard to break.

@doofy2063

6 жыл бұрын

328 anyday... That torque is golden

So stoked for that bmw brothaa! Can't wait to hear it rip, but tell me there is a turbo on de wey!

I love this

You should go like at the drift event!

U making it a show car now brotha! Good lookin

front main seal is under timing cover and to get timing cover off and on you need the sump off, so unless im missing something you are going to need to pull the sump off again and get a timing cover gasket.

Fix the BMW Jimmy O!!!!!! Let's go

Jimmy you should of safety tied the oil pump nut while you had the oil pan off. They like to back out on E36's and E46's if you plan on being on higher RPMs especially now you're boosted. When the nut backs out, your engine is donezo.

The fact that the Cappuccino is just casually turned sideways inside the shop shows just how tiny it is.

10:21 hahaha I reacted to that.

Make sure your pulleys line up. As far as i know you need a small spacer to get the correct alignment..thats how i did it when i did the m50 housing. I dont remember the correct size spacer, but a quick google search will find it.

Use some aluminum cleaner (just a little bit), then mix it with simple green! a friend use it for his dirt bike and the power wash it.

This the setup I'm going to do on my e36

Purchases multiple nice "daily drivers", proceeds to drive the saturn.

@kurtseyffert6649

6 жыл бұрын

it gets good gas millage and he a broke kid

@metalfruttolo9855

6 жыл бұрын

He broke because he continues to buy daily drivers and mod them 😂 but isn't that what we all do? 😂😂

Has mats from rj lol... Uses shop rags lol.

Don't get RJ in trouble showing his work shirt and then him giving you shit lol

I wish i had a Jimmy as a friend lol

u need one of thos rotating power tips :)

Noti gang 😎

if you add more toe in you should be able to counter the camber wear to a point. e36 m3 specs are 6mm total toe in on the rear from memory. seems like a lot but works on lowered e36s and should help the 240 also maybe add a couple mil and see

You need to use rtv on the front of the head where the vanos bolts on and in the back on the corners of the half moons are

You should make a track tool from the e36 and do some trackdays

Probably should have tacked welded that oil pump nut holding the gear on. Or drill a hole the the corner of the nut and wire it to the gear. Just thought I'd suggest it seeing how it's a common problem, coming loose and losing oil pressure. I popped my last m52 and that was the cause.

Hey bro you think I could put the m52 to ti without swapping diff and axels as well as the transmission

is there a reason you don't just rotate the engine upside down to do the oil pan?, because those engine stands are made to do that

Nice are you gonna be running obo 1 or 2?🤔👌🏾💯🍍🍍🍍🍍

jimmy try the foaming oven cleaner

Hey jimmy can I get a ride alone this Friday night at Thompson?? I wanna get into drifting and I believe it was you who said I should go on a ride along first haha.

@patriciaoakes4686

6 жыл бұрын

Well I am first!! You can go after me!!

buy the microsquirt and gm iat, 3bar map. you will learn alot about standalone ecus and you dont need to mess with ancient chip tuning and shitty oem ecus. also there is huge support for megasquirt and bmw so you can get all kinds of start up maps very easily.

Damn damn that s13 tho

Putting RTV on the oil pan gasket will make it's way into the sump over time and could wreak havoc in the engine.

I hope you also replaced those rubber things under the valve cover bolts.

Damn went Chrisfix on that oil pan

How do you do a swap like that and get around the EWS/antitheft devices!?

Pls Jimmy rebuild the vanos system it makes a hell of a diffrence

Am I the only one who questioned why he didn’t turn the block upside down for the pan

What parts did you get for the refresh on the engine

Jimmy you should have cleaned your engine like I cleaned my Supra transmission for the RWD scion tC swap. Try it next time on your swaps if you actually want clean aluminum👍 better than milk, engine degreaser, or oven cleaner😂

Bro what tires size your running on the parallel wheels ?

Bro you need some good highly alkaline car care product to clean that shit off the engines, like some wheel cleaner, trust me i used to wash excavators for a living 😂👍🏻

8:57 skrrt

@JimmyOakes instead of buying a new engine/motor for the IS300 use the M50 engine and save up for a tow-rig:)

Should have used red Loctite on the oil pump nut or wire it, I’m sure you’ll be fine though

Hi, whats the angle impact you using?

Does your stand not turn the engine like a rotisserie?

RTV EVERYTHING.

You should work out a trade with the red Z and get you a truck

@claytonsieracki9116

6 жыл бұрын

Shannon Reed second this.

To bad you can't do an e36 n55 swap. That would be sick a/f

You sound like ChrisFix when you where working on the engine

Will an engine from a 2007 328i directly swap into a 2000 528i?

Weld the oil pump shaft nut next time!

elring and fictorreinz are the best gasket brands imo

Sup jimmy

Please get seat covers for the rear in the lexus, just to keep them clean lol