BMW M4 Competition 2020+ Engine oil change G82 S58T
Автокөліктер мен көлік құралдары
Complete guide to perform your engine oil service on a 2020+ G82 M4
Tools used:
3/8" extension wobble: amzn.to/3UGEIqo
1/4” extension: amzn.to/3Y95WJt
32mm socket: amzn.to/3PbDJh5
17mm socket: amzn.to/3W2kDMk
E6 socket: amzn.to/3P7cDYl
Flat head screw driver: amzn.to/3HkKHym
- This is a combo kit comes with a small Philips screwdriver. We will only need the flathead but this is the best value for the price
3/8 ratchet: amzn.to/3h9zshn
- I recommend getting a ratchet with a flex head. This provides ease of movement and more flexibility when removing the filter. Especially when used with other jobs
1/4 ratchet: amzn.to/3VQGdDA
For the 1/4 ratchet using a flex head gives you ease of movement in tight areas and comes in handy for other jobs.
Parts:
BMW OEM: 11 42 8 092 620 oil filter
0W-30 BMW engine oil. Full Synthetic.
Disclaimer
---The Friendly Mechanic assumes no liability for property damage or injury incurred as a result of any of the information/Reliance contained in this video. The content of this video is available for informational and educational purposes only. Always seek professional advice from your mechanic who has thoroughly inspected your vehicle and can make suggestions or judgements. Every vehicle is different, no two vehicles are the same and every repair will be different. The Friendly mechanic does not guarantee results or give warranties implied or expressed. The use of PPE (personal protective equipment) is always recommended whenever working on/with cars, vehicles, tools, parts and Chemicals of any kind. I always recommend safe and proper work practices when operating/handling power tools, hand tools, parts, liquids, chemicals, automotive lifting devices, stands, electrical equipment and or any portrayed in this video and shall not be used by untrained persons. Any injury, damage, loss of any kind that may result from improper use is the sole responsibility of the user and not myself/The Friendly Mechanic. Any and all information you use in this video shall be used at your own risk.
Пікірлер: 27
Torque for the Drain bolt 25NM. I will link a video on how to reset the service light as I forgot to include it in this video.
@darth_driver
8 ай бұрын
Hey) Do you know if I can change oil service interval from 15000km to 5-7k km?
@friendlymechanic9778
8 ай бұрын
It can be changed. But not without the BMW scan tool. The forecast needs to be adjusted.
@darth_driver
8 ай бұрын
@@friendlymechanic9778 I see. Thank you!
You forgot to mention aligning filter pip on the end, into filter housing. Should be aligned and hand tight to ensure you don't crush the filter! Thanks BMW for a wonderful design! You have to use your feeling to not ruin the engine. Also an unskilled wrench monkey (mechanic) can ruin your engine for you. Thanks BMW! PS Done this change myself and it took three goes to make filter fit.
Excellent tutorial!
@friendlymechanic9778
9 ай бұрын
Thank you!
Great Tutorial man! doing my first car work on a G82 manual M4, this is my tutorial
@friendlymechanic9778
Жыл бұрын
Glad I could help! Let me know if need further assistance. Happy to help.
@marktheirishman722
Жыл бұрын
@@friendlymechanic9778 So I didnt realise I need Jack Stand pad adapters, so I orered them... also need to figure out exactly where the front lift point is, as there's no YT video that shows how to lift a G82 with a car jack... most videos are from a two post lift
@friendlymechanic9778
Жыл бұрын
Assuming your car isn’t lowered or has a splitter you can attempt to use ramps. This usually allows enough room to drain the oil. Send me a message on Instagram I can send you a picture of where the best place to lift from the front is. @Friendly_mechanic45
That filter may be hard to get to but at least bmw is sensible abt the drain plug splash pan! My A7 has 3 diff style screws jus for the under tray 😂
damn, the placement of the oil filter is like asking for oil dripping all over the place. how did you manage to pull out the filter so dry?
@friendlymechanic9778
Жыл бұрын
The trick is to loosen the filter until you can see the gasket ring. Then just let it sit there for a few minutes. I usually do this first then drain the oil, fill the engine with fresh oil and then pull out the filter. That amount of time let’s the oil drain out fully.
6.5Liter oil
@friendlymechanic9778
7 ай бұрын
6.5L of oil is incorrect for the S58T Most other BMW inline 6 engines will be 6.5L.
@f181234
2 ай бұрын
M3 has various external oil coolers so it needs more oil
The oil filter placement is a big engineering fail.
@friendlymechanic9778
Жыл бұрын
Yes it is very unfortunate. Hopefully the video shed some light on the process. Let me know if you want a certain video and I will do my best to get a video made.
@usmz5devil
Жыл бұрын
Can you make a automatic transmission fluid change video later?
@friendlymechanic9778
Жыл бұрын
That may be difficult to get done in a reasonable amount of time due only to the fact that I rarely do this service. But given the opportunity I will make a video
@Racedoc
Жыл бұрын
@@friendlymechanic9778 I just traded my F80 M3 for G82. Thank you for the video it will be my reference.
@friendlymechanic9778
Жыл бұрын
Congrats on the trade! Feel free to send me a question on how to do something on the G82. I may not be able to make a video but I can get you the information.
Terrible design shame on bmw for this. This is unbelievable where they put the oil filter.