BMW M3 & M4 RGBW DRL Mod (F80 F82 F83) - Set your M3/M4 apart!
Автокөліктер мен көлік құралдары
Looking to take your F8X M3 or M4 to the next level? Our brand-new RGBW DRL modules for the F8X LCI2 are the perfect upgrade for you - featuring an easy install process (without having to change your headlights or open up your OEM headlight assembly), these modules will transform the front end appearance of your F8X by allowing you to customise your DRLs to whatever colour suits your mood!
Compatible with all 2017-2020 M3 F80, and M4 F82 F83 with LCI2 LED adaptive headlights.
🌈 Get yours now: bit.ly/4aBFj5F
✅ OEM functionality retained (White daytime lights, Amber indicators)
📱 Mobile app can be used to override the default white daytime lights for RGB colours
🔓 Vehicle unlock with welcome colour effects (This can be changed via the mobile app)
🟦 Comes with a bluetooth controller which will require wiring (12V power and ground)
💻 No coding required
❌ No errors
⬅️ Fully reversible to OEM
- Chapters -
00:00 - Introduction
00:20 - Remove Front Wheel
00:40 - Product Overview
01:14 - Wire and Install Bluetooth Controller
01:52 - Splice and Solder Module to Factory Harness (Brown Wire)
02:13 - Splice and Solder Module to Factory Harness (Red Wire)
02:21 - Mounting the Bluetooth Controller
02:57 - Feed Wiring to Top of Engine Bay
03:20 - Remove DRL Heatsink
03:50 - Remove Factory DRL Module from Heatsink
04:49 - Installing the New DRL Modules
05:50 - Repeat Process on the other side
06:02 - Wiring the Control Wire to the Factory Harness
06:17 - T-Tap Instructions
06:42 - Install the DRL Module Ribbon Cables
07:03 - Plug Factory Harness into New DRL Modules
07:15 - Reinstalling the Heatsink
07:35 - Run Ribbon Cables to the other Headlight
08:22 - Install the DRL Module Ribbon Cables (other side)
08:44 - Reinstalling the Heatsink (other side)
08:55 - Tidy Any Wiring
09:08 - Front Wheel Back on
09:21 - Showcase
09:34 - iilumo Command App
09:53 - Startup Animation
💳 AfterPay & Zip Pay Available
🔧 Installation Available
🇦🇺 Australian Owned & Operated
🌐 www.iilumo.com
📞 1800 003 888
📍 22 Atlantic Drive, Keysborough, VIC 3173
Пікірлер: 30
One of the cleanest installs I have seen, so many people connect them straight to the batter and leave wires all over the place, shame there isn't a way to have a piggy back harness that plugs into the original one
Hello ! Where does the white cable come from that you install on the plug with the + terminal? because my white cable is connected directly to the red cable of the plug
Where you connect red cable?
Love the lights! Does this work on aftermarket IKON headlights, non-OEM ones? Thanks
@iilumo
3 ай бұрын
This only works on OEM, as the aftermarket headlights don't use the same modules unfortunately
Hello, I love these. I have a '17 F82 M4 with Adaptive LED headlights. They are non-IKON though, will these work?
@iilumo
2 ай бұрын
Please send a photo of your headlights to our team on support@iilumo.com and we'll provide you links to the correct module for your headlights :)
Do you have this kit available for the Pre LCI F30 xenon headlights?
@iilumo
10 күн бұрын
Yes we do. Best to send a photo of your headlights to our team to verify and provide you with the link to the modules - support@iilumo.com
Hi, is this tutorial applicable for an F90 M5 (pre LCI). Thanks
@iilumo
3 ай бұрын
This method may apply for the F90, but we can't confirm until we get one in to confirm the wiring.
Do I have to extend the white wire by myself? Mine is very short and like a loop connected back to the controller. Please help.
@iilumo
3 ай бұрын
Please get in touch with our team for assistance - support@iilumo.com
@RyanWilliamsonTM
3 ай бұрын
Did you get an answer to this?
@iilumo
2 ай бұрын
@@RyanWilliamsonTM please get in touch with our team - support@iilumo.com if you require assistance. There are 2 options, but in short if you've already wired yours, it's far quicker to just extend your current white wire if yours was shipped with one that has a loop.
Hello my friend. After locking the car, the headlights don't turn off, can you tell me why?
@iilumo
10 күн бұрын
It may take a little while before it turns off as the circuit used takes a little time for it to completely cut-off power.
Would this work for Bmw f30 LCI
@iilumo
29 күн бұрын
We would have DRL modules for the F30 LCI, you would require a different set. Please reach out to our team at support@iilumo.com with a photo of your headlights, and we'll be able to send you a link to the correct DRL modules suitable.
F87 LCI is exactly the same way to do it?
@iilumo
29 күн бұрын
Not the exact, similar way though. We will have a tutorial for that coming up soon
so what happens when i drive off, will they return automatically to white?
@iilumo
29 күн бұрын
It will not automatically switch. It will stay on the selected colour until you change it again via the app.
hello, I get an error on the clocks after a while and the rings go out or when I try to change the color in the application it also throws an error immediately
@beniz465
6 күн бұрын
Daytime/parking lamp malfunction
@iilumo
6 күн бұрын
Please reach out to our aftersales team for troubleshooting - support@iilumo.com
@beniz465
5 күн бұрын
@@iilumo I bought it on Aliexpress (icedriver) so I won't bother you, I thought you had some quick advice for me on what I did wrong.
@beniz465
4 күн бұрын
@@iilumo I now know what the mechanic did wrong, he connected the red cable to the lamp instead of the white one. Should the white wire be connected to the red one and go to the lamp or should I unplug it from the red one and connect it to the lamp?
What is the app called? I can’t get the QR code to work
@iilumo
2 ай бұрын
It's called "iilumo Command"