Nice thanks for showing keep up the good work

hey im in the middle of doing something like this. what wire did you tap for the switchback amber lights?? i cant figure out which one to use.

@VisionAutoworks

2 жыл бұрын

Amber is wired to the factory connector since that is the blinker. White we wire it to the angel eye circuit on the headlight harness.

@reggieridgell769

2 жыл бұрын

@@VisionAutoworks maybe I should clarify. What wire did you use for the switch back for the angel eyes. The side marker I have is plug n play. But my angel eyes have red (+) black(ground) and yellow (goes to turn signal) I just don't know which wire is the turn signal (all 3 are black) either way props on the car. It looks like sex. And thanks for the reply regaurdless if you know which wire I'm talking about

@VisionAutoworks

2 жыл бұрын

@@reggieridgell769Am not sure on this, we wire all of the angel eyes internally to the headlight so we can easily see which wire it is. Use a multimeter and start probing the connector pins if you cannot locate a schematic/pinout. Inside the headlight, it is a white wire IIRC.

@bobbygraphics

Жыл бұрын

@@reggieridgell769 get a volt meter. Turn on your blinkers Check which wire gets power on and off.. so it should jump to 10v, down and back up

So how do i do this

@VisionAutoworks

2 жыл бұрын

Product links are in description.