Rakesh, thanks so much for this instructional video. It is extremely helpful and specifically for how to do a "work around" when your car did not have the cupholder light under the center panel. I'm going to try to do this as soon as I get the parts I ordered. Very much looking forward to adding the ambient LED lighting!

very good thorough tutorial, exactly what I needed

Thanks Bro i did that and my car has a new look , all the best ✌️

What if i dont even have the foot lighting?

@svenfuchs4381

16 күн бұрын

Exactly my question 😅

Great Tutorial, thank you so much❤

@RakeshTalks

Жыл бұрын

Thank you for the feedback 🙌🏽 have a good day

Good video my f31 dont hv cupholder light and it doesnt have footwell light too car is a facelift lci

By far the best tutorial I’ve seen, really detailed, you put a lot of effort into that. I’m in the middle of doing this mod, I’ve got the cupholder factory fitted ambient lighting wire,it has power but it’s not lighting up the cupholder led or the ac led surround led. Any ideas anyone?

@Ib3tr0lling

7 ай бұрын

whats the part number for that wire? you're probably going to need to code it with ISTA, I can help but I need that part number to get it as well

@MrSprinter671

7 ай бұрын

@@Ib3tr0lling it’s fixed, I used Ista to reset and clear the front electronic module memory which was full. all the lighting works now as it should

@Ib3tr0lling

7 ай бұрын

@@MrSprinter671 oh okay, thats great! do you know the part number for the wire? or part numbers? would appreciate it!

@MrSprinter671

7 ай бұрын

It’s factory fitted if you have the cupholder led and the led dash surround. You can run a wire from the footwell led to set it up. Plenty of tutorials on here!

Thanks for the tutorial, just that i can't find the Y cable con Amazon, can you help me giving me a link so i dont make a mistake buying something elese?

Hello, thanks for the tutorial. So, we agree, the passenger's ambient light is completely removed? And so we can not put the 2 at the same time? Thanks in advance.

Is it possible to keep the light on the floor and the trim? Or when i connect the radio trim tool the lightnon the floor will not work any longer

Is that radio lightning standard on f30 lci models with lightning package?

Great video and I am wanting to do this on my F82 M4 - Can you advise a link to the additional harness you fitted, as like your car mine doesnt have the cup holder LED. I tried the link below that you've provided but its going to a "cant find on eBay" page?

@ibraheemmohammad2715

3 ай бұрын

Did you ever find anything? Im getting the same issue lol

Can u send another link or the name of the cable I couldn’t find it please

Donde consigue el cable, no lo veo por el enlace porque pone que no funciona

can i put this in my bmw 340i??

Do you have a link for the panel…?

Does Lights turn on and turn off with light sensor?

But now you have don’t footlwillight anylonger at the passender site??

The link doesn’t work anymore. Have you got another link?

Do you cary out any work for anyone?

Thanks for this tutorial! I tried it and the radio trim light works great when the door is open & the footwell light is bright. But when the footwell light dims after closing the door, the radio trim light switches off, anyone with a similar issue?

@monroeveva

10 ай бұрын

I have the same issue here. And also I cannot change the color of the trim between orange and blue. It keep orange color and when I switch color it seem to dim a little bit still keep orange color.

@InJamesWeTrust_

8 ай бұрын

Has anyone figured this out????

You do more Tutorials for the f36?

@RakeshTalks

Жыл бұрын

I have a F36 channel called WhosRak KZread it but been super busy lately so haven’t had time to film anything

@lordhelmchen3687

Жыл бұрын

@@RakeshTalks oh perfect i subscibed it. any plans for next modifications? Maybe the OLED Rear Lights

@RakeshTalks

Жыл бұрын

Yeah, looking to get the m performance kit and a Gts taillight

hi, thanks for the video, the link for the wire is no longer available, can you send another link? I can't find this wire, only the smaller one for the one with cupholder light! thanks

@RakeshTalks

Жыл бұрын

Look for Y cable for bmw 4 series without ambient light on eBay

@claudiu7252

Жыл бұрын

@@RakeshTalks ok, thank you!

@karinjosmucacos

Жыл бұрын

Do you havenow a link ? I can’t find that on Ebay . Thank You

Thank you for this tutorial. I have followed the instruction, unlucky that my led panel will light up only when the door opened and will turn off when the door shut. Do you have any idea? Thank you in advance.

@ardiaaaaan

9 ай бұрын

i have the same issue, is someone know the answer

@InJamesWeTrust_

8 ай бұрын

Has anyone found a solution to this??🙏🏾🙏🏾

@SuperPinkTomato

5 ай бұрын

Same here

The extension wire is 3 or 4 pins? 1 male 2 females connectors? Thank you.

@YassirHaddouElYakhloufi

Ай бұрын

Did u figure out how ?

Let us how do you turn light on? Because this you have power only when doors are open.

@SuperPinkTomato

5 ай бұрын

Same here

I have a question, if instead of the light for the cup holder I have a usb port, is it the same method as if I had that light or is it different?

@NozH2000

3 ай бұрын

Same question from me also :)

How to do it without light package? Haven't got footwell lights.

@ozboz33

6 ай бұрын

I have the same issue but I think I read previously you can take power from the hazard light switch to power the light.

I have no lighting package, so also no footwell lights.😢

@RakeshTalks

Жыл бұрын

Ah man, sorry to hear that. Maybe try if you can mount it to any of the idrive wire ?

@bzyyz1052

11 ай бұрын

Hello, thanks for the tutorial. So, we agree, the passenger's ambient light is completely removed? And so we can not put the 2 at the same time? Thanks in advance.