BMW i3 | Hub Replacement- Not what I expected.
Автокөліктер мен көлік құралдары
Here I replace the rear right hub on my MY 2016 BMW I3. This project did not go as I expected a typical hub replacement project to go.
Part numbers are as follows-
Hub 31-20-6-8774-443
Hub to CV axle bolt-40-6-858-534.
Torque spec - 50NM/Rounded up its 37 ftlb. Plus 155-degree angle of rotation.
Also referred to as the spring bolt or collar screw and compression spring.
Hub to knuckle bolt- 4 required. 31-20-6-874-581.
M12x1.5 is the thread size.
Torque spec is 80NM/ 59ftlb. Plus 90- degree angle of rotation.
Replacement wheel stud bolts-36-13-6-890-324. Torqued to 103 ftlb.
Video cards-
kzread.info/dash/bejne/eKx1sttmntDVqMo.html
Gear
Camera-Galaxy S10+
Microphone-Neewer Cm28
Edited by- Me
Follow me on @twitter BelkinEco
Facebook-@EcoBelkin
Пікірлер: 6
I subscribed just because of his video was the exact video I needed. First time in my life I found a perfect video
Is it a single part number for rear left and right ? What is the part number ?
@EcoBelkin
Ай бұрын
Hub is the same front/rear &left/right. Listed in description
Warning. that ISN'T a simple brake job on the rear. the Electronic Parking Brake will need some attention. do some research on how to retract it safely.
@lumpymash
Ай бұрын
Thanks ! Will do.
@lumpymash
Ай бұрын
Thanks for this. Will do.