This works for ALL BMWS REGARDLESS I have installed these tips on my BMW E60 530i without issue, just please remember, when cutting the dual tips off your back box on your E60 leave enough of the tip to clamp the new dual exhaust tips on ! You do NOT need to weld these on what do ever. I have the same exact ones on my M5 and I have no issue. Most E60 & E90 come with straight exhaust tips therefore, this can be done on ANY BMW with straight exhaust tips. Dow pipes this can also be fitted but need alteration to make them fit. If you cannot get it to fit or don’t feel comfortable cutting if your local I will do the job for you on your E60 Or E90 or F series if you have the tips.

@ivanzlopasa

2 жыл бұрын

Great video. Can you give me a link where can I buy these ? Thanks 😊

@BMWDoctor

2 жыл бұрын

Oh my god bro 😂 I would end up with 100 links there is so many kinds and depends on what you want. Just type in google Bmw exhaust tips and you will see what I mean 😂

@ivanzlopasa

2 жыл бұрын

Thanks, that's all I need. 🤣💪

@K_258

2 жыл бұрын

@@BMWDoctor please send me the link of those.😞

Every time I look at any of your videos I feel so glad I brought my 04 3.0 si even more 🙂

Nice set of tips, doc! That Estoril blue looks boss. 💪🏻

Hell yeah that looks clean af 👌 🔥 💯 my friend makes it look more aggressive

Wonder if two would fit next to each other on a 128 Msport, has Dual drivers side exit. Looks way better, good job Dr.!

What’s the measurement? The inlet diameter and which length measurement did you get? I have bmw g20.

It looks good like that 👍

how did they hold up to heat? no flaking on the clear coat? I want to install some on my G01 X3

Do you know if the tip sizes are the same for an F30 335i and a 340i?

Is there a way to do this without taking off the bumper and cutting off the pin? 😊

That looks nice

What’s the exhaust and where dis you get them from mate?

hi could somebody please tell me what size i would need for my exhaust i drive a 335d any help would be great thank you regards Mick.

Hello mate do u think I'll be able to put one my 2 series F45 218d? I'm tryna pimp out my MPV 😂

Does it work for the 116 also bmw f40 2021

What size inlet are the aftermarket tips

What’ is the outer diameter of the exhaust tips. I want these for my m235i

Does this fit g20 3 series?

Does it work on the F20 118i?

Really nice tips

Hello mate I have just done the same as you on this video bit my tips stick out much more than yours.. I've taken the metal pins off, it looks like your exhaust may be different than mine, but not sure.. ?

@leewhitehead8407

2 жыл бұрын

I think you may have different tips aswell. Are yours shorter ?

@bmwenthusiast96

10 ай бұрын

Your tips should be a maximum of 90mm long so they don't stick out.

how many hp? or is just for look

do i need to take off the diffuser to do this?

@bmwenthusiast96

10 ай бұрын

If you take tips with a maximum length of 90mm you don't need to cut of the metal part for them to sit flush

Is it possible to remove the carbon fiber off the exhaust tips

@bmwenthusiast96

10 ай бұрын

I guess it would be but why should you do this. I think it is there for a reason

Hey, does it improve the sound of the exhaust or is just a fancy stuff?

@bmwenthusiast96

10 ай бұрын

Just fancy stuff

@Carloko69

8 ай бұрын

It's like putting on new shoes

Worldwide shipping link please 🙃

Would that change the sound in any way?

@bmwenthusiast96

10 ай бұрын

Of course not. These are only the tips and will only make a difference for the eye

hi whats inlet size? thanks

@bmwenthusiast96

10 ай бұрын

60mm on m135i F20/21

Great video Dean you sound out of breath you ok ? 🇬🇧🇬🇧👍👍

@BMWDoctor

2 жыл бұрын

Long story but this was before my operation I did all this. I am now ok thankfully

Honestly, they’re still sticking out so I’m not sure if cutting it made a difference in my opinion lol

@dougyscott5745

3 ай бұрын

Of course it has u tube

@adeelahmed8641

6 күн бұрын

Right, they stick out a little still , so it's not flush..

Can you do mine?

Does it work on a diesel?

@BMWDoctor

2 жыл бұрын

It works on all cars diesel & petrol I have these tips on my E60 N52 I bought dual tips tho and they was very very easy to slip on. You must cut off the old tips but leave enough pipe to clamp on the new ones.

@200degrees.

2 жыл бұрын

@@BMWDoctor thanks pal 💪🏻

Hi, what diameter is the inlet ? 60mm?

@bmwenthusiast96

10 ай бұрын

Yeah on M135i F20/21 it is 60mm. Tips should not be longer than 90mm, then you don't need to cut off the metal bit

Lmao bro u bought the wrong mperformance tips. The f20/21 have shorter tips which slip on the car. What u used are tips for 3/4 series

Just upgraded these on my e60, great deep and aggressive tone (Not Obnoxious)

@Randymanrockssocks

2 жыл бұрын

You do realize.... these do absolutely nothing for sound lol

@King-Chub

Жыл бұрын

😂😂 tell me you are lying without telling me you are lying!

@GwuaposF30

10 ай бұрын

😂😂😭😭

Them tips aren't flush they stick out 2 much stock looked better

@BMWDoctor

2 жыл бұрын

There meant to stick out a bit to show the M logo, that’s the whole point there not meant to be completely back. Look at the M cars with these from factory and you will see they are fitted the exact same way from factory. “Most” people don’t even fit them properly, they just fit them which hang out way way to much and makes the car look horrible. It’s also a hazard to burn your leg on them. Mine are completely flush and that I made completely sure as I’m OCD about things like that, to the point I even made sure the M logos are (Both) straight and inline with the diffuser.

@MrBeenjamin72

Жыл бұрын

Agree that “flush” was the wrong word. They do look better though. Also too bad more care wasn’t taken to avoid cutting holes in the original pipe.