thank u johnny depp

Thanks a lot for the video! My roof only works manually now so I needed a way to latch the roof cover when the roof is down. Thanks to your video I managed to fit a switch that goes to the latching motor and holds the cover down. Thank you!

The uk had its first sun in while this weekend and I am so thankful for this video 🙏

@ProblemSolverGarage

2 жыл бұрын

👍

Thank you for your series on the E36 vert, I have just purchased one myself thats in need of a full restoration. I will be following your informative vids to assist me in my restoration. Your attention to detail is amazing and imho, your the man when it comes to practable solutions to problems with the vert. Cheers, stay safe and well. (John.m in Australia)

@ProblemSolverGarage

Жыл бұрын

Thanks for the feedback, I hope you enjoy the whole series every episode in a row

Brilliant video, very useful. Many thanks from UK.

@ProblemSolverGarage

2 жыл бұрын

Thanks from Canada 🇨🇦

do you know what pieces to buy to make it automatic again? I have a 323i and I thank you for this series its helped a bunch

Thank you so much the front motor was giving me a lot problems. Your awesome

Clockwise or counterclockwise to open and close

This is an awesome video,I too have a 323Ic,I bought it with 70k mls in it,but 20 yrs ago,it was on the pricey side,the roof was the 1st thing to go,I parked it inmediatly after that,all is good in it with about 76k miles in it,but always look at it,decaying as tine goes by,I want to fix it but I don t want to spend a whole lot if I can help it. I will watch your vids to learn a thing or two, thank you.

Looking forward to more videos. I'm doing a manual swap as well.

@ProblemSolverGarage

2 жыл бұрын

That’s awesome, I just installed the transmission last night, lots of videos coming on the swap. Thanks for watching

Love you bro thanks again

Thank you such a great video!

A million thanks for creating this video 🙏🏼🙏🏼🙏🏼

@ProblemSolverGarage

10 ай бұрын

Np 😉

Great video. can't wait for the switches to be wired in

@ProblemSolverGarage

2 жыл бұрын

Video should be coming out soon

You the best matte! Tanks so much

Thanks heaps my friend, your videos are very helpful. It seems the convertible top is a common problem on these models.

@ProblemSolverGarage

Жыл бұрын

Yes it is

Excellent video

@ProblemSolverGarage

2 жыл бұрын

Thanks

Thank you so much. I have a 99 M3 and the top was destroyed a teenager had it. We finally got it down and now it's been sitting for 2 years waiting for a roll and after all this info I'm pretty sure I'm going to go ahead and rip the whole thing out I live in California it's going to be a summer M3. Thank you so much for all your info.

@ProblemSolverGarage

5 ай бұрын

Np 😉

Thank you for this video. It helped me get my broken top secured and not ruin my interior. Much appriciated.

@ProblemSolverGarage

2 жыл бұрын

No problem 👍

Thank you for this video

@ProblemSolverGarage

Жыл бұрын

Thanks for watching

I’m really happy because I found your channel I was searching for this so long I have a bmw 1995 convertible and the roof doesn’t work at all I need your help with so many things for full repair the roof and the electrical windows

@ProblemSolverGarage

6 ай бұрын

I have a playlist on the roof videos on my channel

Awesome! My 1999 323 convertible had the same problem. My mechanic claimed he screwed the top by hand!

Hi there. I'm so pleased that I found your channel ! My E36 project with the very thing you warn against in this vid. My E36 has a fully automatic roof, Unfortunately the two side hingers don't line up roof will not close the final 8" as the open mouth hingers have gone above the spindle/wheels. Not sure how to get them too realign on to the frame spindle/wheel on each side... Any ideas would be welcome😃

i noticed your in Ontario and i am too. I have a 99 e36 M3 Convertible for 21 years , i am too redoing mine and have parts. i am a bmw enthusiast. have other and a shop. Love your way of thinking and look forward to seeing more. I am located near London Ont, where are you. Thanks. Frank.

@ProblemSolverGarage

2 жыл бұрын

Hey how’s it going. I also love these cars I had one when I was 20 and now I am 42, and now have another one. Thanks for watching the videos I really do appreciate it. Unfortunately I am about 17 hours north of you, close to thunder bay Ontario. But I hope you keep watching the series and the progress on my BMW. Feel free to comment or message me with any questions anytime.

Awesome video! Looking forward to the video where the switch is wired in!

@ProblemSolverGarage

2 жыл бұрын

It’s coming soon just replacing the brakes right now

@elijharoberts5590

2 жыл бұрын

@@ProblemSolverGarage Awesome, can’t wait!

Great job 🇱🇧🇱🇧

@ProblemSolverGarage

2 жыл бұрын

Thanks 🇵🇱

Thanks for sharing this video. My roof is up, I'm able to do the screw thing and lift the front, but I can't open the back part even though I popped out the lever under the rear seat. Any advice? Thank you!

@saltybloodtx7146

2 ай бұрын

It's probably oppen I had the same problem had to lift the front end up and it made the rear pop up. If that makes sense 😅

Thanks for these videos! quick question, in order for my fully automatic top to work, I need to "C" Clamp the targa top motor to the bracket to keep it engaged. How hard is it to change the mounting bracket? I've already changed the trunk latch thinking that it was causing the roof not to operate. Any help would be appreciated!

What if I have a semi automatic roof? What is different to a fully automatic one? Thanks man, great videos!

great job !

@ProblemSolverGarage

Жыл бұрын

Thx

Thank you you’re awesome 👏

@ProblemSolverGarage

Жыл бұрын

Thanks and thanks for watching

Does it matter if I closed both of the motors after I opened it?

nice video ,lot of help 💪🙏🙏🙏

@ProblemSolverGarage

2 жыл бұрын

Thx

Hey @ProblemSolverGarage great vids I just bought one of these to flip and I’m working on the top. I have an issue where the rear cover that hides the top does not open all the way. Do I have to adjust some cables? I don’t even know if they are adjustable in the first place

@elourencosd

11 ай бұрын

Thanks!

Very good video

@ProblemSolverGarage

2 жыл бұрын

Thanks

Do you think there would be a way to rig up the two motors to a toggle switch or two and make it be able to lift and lower the top? I switched my automatic top to a semi automatic top due to micro switch issues and was wondering if i could by pass everything and just use my toggle switches id install to open and close the roof

@DevinGoodwinlv

Жыл бұрын

NVM I JUST FOUND YOUR NEXT VIDEO. YOU ARE A FUCKING GOD!!! THANK YOU SO MUCH MY FRIEND!!!!!

Hey nice videos, but I need to know which way to turn the screw to open and close the top??? Do you forward the drill to close and reverse the drill to open???

@ProblemSolverGarage

Жыл бұрын

Don't use a drill at first do it by hand and then you will know which way to go, I can't remember

Great job! Would you do a video on how to replace a soft top?

@ProblemSolverGarage

2 жыл бұрын

Hey thanks for watching, and yes I will be doing a video on that, and also the tensioning strap which there’s no videos on the Internet about those, there’s one video that has all the wrong information lol

@jorgecifuentes8052

2 жыл бұрын

@@ProblemSolverGarage Much appreciated it!

What if my motor that pulls the tonneau cover shut , the one you manually closed with the wires and battery , doesn’t work? , how can I get it to shut all the way ? I figure if the moter doesn’t work anyway the hardwire to a battery won’t make it work either right? Is there a way around this?

So which way do you have to turn it to get it open

A couple of points that should be mentioned. The tonneau cover should stay up on its own , there’s a hydraulic strut (s) that help lift it up and hold it up . ( just like the hood ) . If not replaced it will cause damage to other parts of the system ( bent motor mounting frame, bent rods or burning the lift motor) . DO NOT , ever use a drill to turn the front motor emergency mechanism. If the drill goes to fast or to much torque is applied it WILL strip the plastic gear .

@ProblemSolverGarage

2 жыл бұрын

Thanks for the points, just figuring things out as I go. Lots of problems with this one, should get it on the road by summer hopefully

@ReddyReg

2 жыл бұрын

I think I stripped mine. I can't get it to open again, just keeps turning.

@ProblemSolverGarage

2 жыл бұрын

@@ReddyReg That’s why that cover needs to be off so you can see which way those two sliders are going.

@chrisrich1487

2 жыл бұрын

@@ReddyReg You have to remove the motor completely and either replace it or repair it. I bought a simple repair kit and used a couple small washers to avoid having to replace my motor.

@ReddyReg

2 жыл бұрын

@@chrisrich1487 I replaced the whole thing with a manual one.. now I just gotta learn how to replace my canvas cause shops are trying to charge ridiculous prices 😤

How do I open the Trunk if I already got the top down

Hey man, please help me. Iam from czech republic so excuse me for my english. But i have a problem with my roof a have a semi-automatic roof. When i want to get my roof up, it works but when back of the roof with window have to goes up to cloes the “C” on the back it stucks open and part of the roof with the window doesnt goes up to close the “C”. Can you please help me here in the comments or tell me which video of yours or which part should i have to see ? Thanks. I apreciate your videos.

i like those black rims

I need help from anyone ... for the rear motor I could not manually close it up, any ideas? Thanks.

just got a 1994 325i convertible (semi auto top) The soft top loves to go up after the reset... but won't go down. I find myself having to reset again and again to get the top down. any ideas? much appreciated

@ProblemSolverGarage

Жыл бұрын

Check all the micro switches make sure they are getting pressed

@zacharygreene2095

Жыл бұрын

@@ProblemSolverGarage The reset full works. tonneau will close, then open, and then the top fully shuts. after closing, I press the switch to open and i just hear the motor run. I cannot press anything while trying to use the semi auto open. Have you herd of this before?

@5:38 that's my problem, they have unlatched themselves. Any idea how to sort them?

@ProblemSolverGarage

Жыл бұрын

Yes, you need to watch the whole series on the roof videos. It’s in my playlist.

I popped out the vertical motor that controls lid cover and now it cant be popped back in. Any suggestions?

@ProblemSolverGarage

2 жыл бұрын

It will go, try moving the Lead up and down a little bit while somebody else tries to push the motor back in

@wtungdong

Жыл бұрын

Yeah I just have the same problem too ...

I just bought a 97 328is

I love you

@ProblemSolverGarage

2 жыл бұрын

Lol nice 👍

Is that a Canadian sold M3? I want to say that I saw a Donut Media video stating only 43 M3s were sold in Canada. I could be wrong, but this could be a "holy grail" car.

I need to get my roof back down. It's currently stuck in the closed position. It's a fully automatic roof. Do I still need to disengage my motors before I start opening the roof with the drill (i'm going to do this with a torx screw just to be safe)?

@johl83

Жыл бұрын

I tried it unscrew manually without releasing the motors and the screw just becomes harder to turn and spins back in to the start position again

@ProblemSolverGarage

Жыл бұрын

Yes that’s what you need to do but make sure you’re turning it in the right direction and do everything really slow

@johl83

Жыл бұрын

@@ProblemSolverGarage thanks man. I will try that this evening!

@johl83

Жыл бұрын

Hi again, any idea how I can remove the cover. I tried to pull it but it seems really firm. Is this cover on with screws or clips? Any idea where the screws are if there are any?

@ProblemSolverGarage

Жыл бұрын

One is in the centre of the cover, and then there’s a clipper screw in each corner, the roof must be an open position to get the cover off I believe

I'm going to watch all your videos but what are the reasons these roofs stop working in the first place? I'm in the process of going to look at and buy a car with this problem.

@ProblemSolverGarage

Жыл бұрын

Microswitches and the computer are usually the problems

@JB91710

Жыл бұрын

@@ProblemSolverGarage I just picked up a 1999 323ci. The top doesn't go down but it's not too bad except the bottom stitching for the zip in rear window has been pulled off. Are there shops that can stitch in a new window and zipper or am I looking at a new top? The owner gave me a new vinyl $125 top but I can't imagine the quality will be there.

👍👍

I have a question , what if that t25 insert is stripped (insert on the motor)

@BarberChris2000

2 жыл бұрын

Can I fixed that ?

@ProblemSolverGarage

2 жыл бұрын

Sorry I don’t know what that is

@BarberChris2000

2 жыл бұрын

@@ProblemSolverGarage time is 9:57 , when you use the drill , that piece for me is stripped

@BarberChris2000

2 жыл бұрын

also on time 6:30 . that peice there

@MrLonelyScout4EVER

2 жыл бұрын

@@BarberChris2000 If that is stripped, You can take off the motor it self, and take the worm wire and put the drill/socket into that itself, there will be 2 worm wires connected to the motor,

Where did you get the wires that go onto the battery from

@ProblemSolverGarage

Жыл бұрын

I don’t understand what you’re asking me

@ghxstpepper

Жыл бұрын

At 13:17 those two wires that go to the battery

@ghxstpepper

Жыл бұрын

@@ProblemSolverGarage did you buy those wires from some where or did you cut them off the car

@ProblemSolverGarage

Жыл бұрын

They are just too random wires they can be speaker wires they can be wires from anything

Does this apply to 1996?bmw 328i?

@ProblemSolverGarage

Жыл бұрын

That's the year this one is

1300 bucks for M3? Does it have working engine and transmission? I bought mine 1996 328i convertible for 12k few months ago

@ProblemSolverGarage

2 жыл бұрын

It’s a 328 I 1997 The automatic transmission was no good, and the motor ran really bad which I fixed and I replaced the transmission with a manual transmission, the windows didn’t work the roof didn’t work, you name it and it was broken, I have like 30 episodes on all the stuff I’ve fixed already

That's wrong if you use a drill to wind the motor you will burn it out, use the Allen key supplied in the tool box in the boot DO Not USE DRILL

@ProblemSolverGarage

Жыл бұрын

yes if you don't have a feel for it don't use a drill.

@anik321

27 күн бұрын

How do you burn out the motor by using a drill? Back EMF?