Awesome video my friend I’m learning a lot watching your content

Man youre gem. Thank you for great info, going straight for VW setup.

Love the video. Thanks for sharing. What about the rear rotors with f series rear caliper

Really good informative video. I’d like to upgrade a 323ci & a 330ci but both would need at least 18 maybe even 19 inch wheels, I’m sure my discs are like 300mm 😢

nice, it would be usefull, a measurement of the offset of the caliper, from the carrier to external pistons, to see the fitment of the wheels. the caliper seems to be really big, i had 18" type csl wheels in non M had a lot clearance stock, but i think the caliper will hit.

Can you share a code for the rotors?

You make quite good videos, ive got the same car with a n47 engine

Would this 340mm option work for the rear if you ran 380mm f80 brakes on the front per your video 6 month ago?

I have an 04 BMW ZHP and I was wondering if this brake upgrade would fit the stock Style 135 wheels?

Hello man. I have a question the 4 pistons caliper just be bolt on to a bmw e46 325i With the wachers 1,5mm The 4 pistons caliper like the one for 380mm disc's to or are they different...? And ofcourse the 2 piston caliper with 370mm or 345mm disc on the rear ..?

What is the final brake bias with 135i rear? If you knwo alkready.

I used 5mm spacer between knuckle mounting point and caliper on E46 m3 . I run CSL disc is T5 disc same size height wise or new spacer is needed.? :)

Hi, thank you for a great video. I've read on some forums, that you need to shave 1 milllimeter of each brakepad, when using T5 brakedisc, because they are 32mm think compared to the OEM BMW disc, which are 30 mm thick. What are your experince ?

@vysgarage

9 ай бұрын

Hi, No, they fit fine. Thanks

hi, can you tell me which brakes will fit my BMW X3 F25?

Congratulations on the very well explained video, however I have doubts regarding the use of the Master Cylinder, do you use the original or did you change it, for E36 which one would be correct so as not to make the brake rubbery. 🤜⚔️🤛🏁🏁🏴‍☠️🇧🇷🇧🇷🎱🔥👻

I've been looking for a brake upgrade for my '03 330i ZHP. My biggest concern is heat. The temperatures where I live reach 46C to 49C in the summer. I have a bolt-on Hawks kit on the car now but during the summer, my brakes can get fatigued very quickly still. I feel like rotors that can dissipate that heat as quickly as possible would be the way to go for me but I'm not sure how to tell which ones would do the best job at that.

@vysgarage

10 ай бұрын

Pads and fluid are most important, if you’re having issues with hawks, try pagid rs29

Useful info, thanks. What's the pedal travel like after and what MC are you using, OEM if so which model? Also, a bit confused about the T5 disc spec. The E36 uses a CB of 72.5 and the T5 disc spec is CB of 76mm, so the comment about enlarging the T5 CB is confusing without sharing the part number or specs of the exact 340mm disc you are using in your application.

@hevendranarayansamy2793

3 ай бұрын

Same question

@lordluker

3 ай бұрын

Same question, CB on t5 rotors is bigger than CB on E46...

@vysgarage

3 ай бұрын

@lordluker disc cb and wheel cb are different things 👍🏻

@lordluker

2 ай бұрын

​@@vysgaragealready checked everything on my car :)

Hi, Great video! just out of interest how would you go about fitting the rears? is it same set up? any info would be greatly appreciated

@vysgarage

4 ай бұрын

Hi I don’t know yet, I will try in near future

Where did you get those hub spacers? Also it might sound odd but i have 2x Left side calipers like these (from an F30 335i) could i use 2 left side calipers? Other than the bleeder screw pointing on the wrong side, and brake line angle, if the line is long enought i shouldnt have any issues right? All 4 pistons size are the same? (Not staggered like some 6 pots brakes)

@vysgarage

5 ай бұрын

No you can’t. Routing of Brake lines is critical, And bleed valves have to be at the top.

Hello, did u rebuild your back shield plate? I mean, when u set the disk, does it touch this plate or it has enough space between them. Do u need to bend, cut , or remove this shield plate? Thanks.

@vysgarage

Ай бұрын

Sometimes you need to bend it or even trim it.

What about master brake cylinder for e46 330i? Should it be replaced for cylinder's from e46 m3? I calculated what single stock e46 piston 57mm has the same area as 4 brembo pistons 40mm. So it would be ok even with stock e46 brake cylinder?

@vysgarage

9 ай бұрын

Stock master cylinder is ok 👍🏻👍🏻

What is the lenght required for a brake lines? I checked the catalog and f30 brake lines have length 615mm vs 405mm of stock e46 lines. Should I use f30 stock lines? Ending is the same in both cases - M10x1. Thanks

@Z4coupeuk

9 ай бұрын

+1 - any more info on the brake lines would be very helpful. Awesome videos, thanks

@vysgarage

9 ай бұрын

No, I use e46 lines +50mm with e90 unions.

Commented before I watched to the end. My 330 is an 05 plate so I can upgrade & get away with keeping 17inch wheels. I need to know more

@vysgarage

6 ай бұрын

Some 17”’wheels clear them. 👍🏻 Pm me if you need more info

@anon109

Ай бұрын

Hi would e36 m3 contour 2 17" wheels fit?

@christopherriley1187

Ай бұрын

@@vysgarage only just seen this. Thank you 🙏 So if I buy all the stuff from the video it’ll fit! I’ve just bought new brembo discs all round for the 323 but idk what to do about calipers

Has by chance anyone tested if these will fit an e36 with Styling 68 wheels in 7.5Jx17" Et41 with 5mm Spacers?

@vysgarage

10 ай бұрын

Very unlikely.

Hello, I’m in the USA. I already purchased 340 calipers and I test fitted the caliper on my ‘96 328i. Bolts right up, I’m still going to grab some washers from work. My question is; where can I purchase the custom brake lines or what are the specifications so I can find someone here in the US to make the brake lines for me? Second question, since the US did not get VW T5’s, what’s the link where I can get the same T5 rotors?

@vysgarage

Жыл бұрын

Hi Pm me on facebook

@lj.cagungun

Жыл бұрын

@@vysgarageJust sent a message, thank you!

@marlonbaird6070

9 ай бұрын

Use e46 M3 csl rotors

Yeah amd what about brake servo and brake cylinder?

@vysgarage

4 ай бұрын

Stock

How about the 380mm f series brakes and calipers on non M e46 330ci? Will be compatible?

@vysgarage

Ай бұрын

You’d have to machine the rotors down to 370mm but it’s possible

Hello. Do you have part number of T5 brake rotor? VAG 7E0615301F - this one? 340mm x 32.2mm

@vysgarage

9 ай бұрын

Hi 8DD 355 129-251

@vladk9287

9 ай бұрын

Also found some analogs for EU market: Rotinger 21281GLT5 Brembo Prime 09.B498.11 VAG 7E0615301F BOSCH 0986479546 Zimmermann Sport Z 600324952 ATE 24013301001 Fedoro DDF2182C1 TRW DF6499S Remsa 6142010

Do you not upgrade the brake master cylinder?

@vysgarage

2 ай бұрын

No

Hi could you send me the part numbers for the hell brake lines please also the rear ones

@vysgarage

7 ай бұрын

Hi, they are are made to my specifications

Found a good deal on a set of e92 m3 brakes. Is there any possible way to retrofit them on an e46 (non-m)?

@vysgarage

4 ай бұрын

None at all

@alaaal-faris4656

4 ай бұрын

@@vysgarageokay, thanks!

How thick are the hub schisms? for E46 M3

@vysgarage

3 ай бұрын

2mm

@FailofWar127

3 ай бұрын

​@@vysgarageAny reason to run 340x32mm instead of 340x30mm? Seems like the factory discs for these calipers are the 340x30? I'm just not quite understanding why we would wanna run a thicker disc/rotor instead of using what the caliper was meant to run. I'm assuming the 2MM schisms are meant to space out the rotor from the hub so it can sit centered between the pads

@vysgarage

3 ай бұрын

@@FailofWar127 2mm shims are used to space out the hub on e46 m3 only, Caliper washers are there to space out Caliper on non-m models, not the rotor. The reason to use those rotors is that they are the only ones that work on e36/e46. You need to take into account hat/bell depth, rotor diameter, width, pad swept height etc. If you’d like to suggest 340x30 rotors that would fit, I will gladly try them 👍🏻

Is useful for 2004 z4 e85 3.0i?

@vysgarage

7 ай бұрын

Yes

How do these affect the brake bias?

@vysgarage

7 ай бұрын

How does any other brake upgrade?

@bhagvedsingh2147

7 ай бұрын

@@vysgarage with the 135 upgrade all rounds the bias is almost unchanged. How does this affect the bias?

@vysgarage

7 ай бұрын

@@bhagvedsingh2147 What is your exciting piston and rotor size ?

@bhagvedsingh2147

7 ай бұрын

@@vysgarage standard e36 brakes. Just race pads and fluid with braided lines

What year Transport T5?

@vysgarage

8 ай бұрын

Not entirely sure, they are 340x32mm

So good video, but the discs you have from T5 are from Mtec and there crap pure crap, there no other company’s making good custom discs 🤷🏼‍♂️ I wish EBC could make custom discs I know people using T5 discs and it’s fine for them but when you track with proper aggressive pads these discs cook really fast Apart from that the video is pint point correct how to get them on e46 a lot of people who done it will agree, and I I agree with you about using the CSL discs

@vysgarage

Жыл бұрын

Thank you I have had good experiences with mtec. You can use ebc discs, just need to modify the centre bore 👍🏻👍🏻

@thbigshot101

11 ай бұрын

@Armanis Hi, I've been looking into those swap and would you happen to have any more info I can read up on? I am primarily concerned about the track as this would be a budget BBK for my 330 and I would love to know more info, like which rotors have good metal. What is your experience with this swap? Thanks

Washers on hubrotor or caliper ?! Ehm no !

What is your fb page please as i have these calipars bought for my E46 330

@vysgarage

4 ай бұрын

It’s the same as my user name 👍🏻

Textar pads 💩

Vlad the scammer !