one of the best explanations of how NCSExpert and Dummy work together. Thanks you!

One of the best coding videos for beginners! Thanks!

love how much effort and how much details you put in this video, it really helped me a lot as am trying to understand all this diagnostic/coding applications for the BMW thank you so much

Finally I've found a proper instruction. Thank you so much! It easy to understand and straight forward.

Great, comprehensive and slow enough for the first-timer to follow. Thanks!

I used this video to code my E60. Excellent video, great steps, very clear and detailed. Thank you so much for taking the time to make this video

@amydarocker6531

5 жыл бұрын

Which year of bmw e60 do you have ? and which obd cable are you using ? any links for buying it ?

Very well explained. The best video for beginners that I found on KZread. Thank you very much.

Absolutely amazing video. Thanks so much

So much makes sense now, thanks !

Thanks for a very very clear explanation.

Very well explained. Thank you!

Very well explained well done thank you

very good explanation, many thanks

Great stuff SAFA brother, very easy to follow, keep up your vids as they are super helpful :-)

@ecologicaltime

4 жыл бұрын

Glad to hear that!

Great video. Very informative

Nice job...good overview/example

just what i was looking for, cheers

An excellent video thankyou Sir

Very very good!

very detail~ thank you

Grate job!!!

Man very good video 👌👍helped a lot.

Helpful video!

hey friend, thank you for these huge information. you are so expert, is this just coding or I should install a hardware too to make the passive entry -Access enabled? thank you for help.

excellent video well done

thanks for a better explanation for novice...

well done man

You need to set your latency at 1 in your com port for best performance and stability.

life saver

hi good video

yussus boet I so dig your accent! and a great video

very good

Good video. Not sure I’d activate that feature though as it makes it easier to steal

THANK YOU MATTE!

Very nice video,why you didn't activate the passive Go too? My problem is that my passive entry don't work but my Go is working. So i will check first in the Dis for errors and in ncs expert for the coding. But I'm afraid that i have to take out each door handle to check the antenna wires,if one handle is broken then all doors won't work i think.

Thank you, thank you, thank you!! I've watched other videos that jump all over and leave steps out and then want you to pay for the "real video". Uh, no thanks. How am I to know that your "real" video is any better. I'd rather just share the knowledge I have and you've done exactly that!! Great job :D

@ecologicaltime

4 жыл бұрын

thank you, i try to make the videos step by step

Hey! do you also happen to have a video where a replacement JBE is coded? don't want to mess it up... :D

Great video, thanks. Was struggling to understand NCS Dummy. Couple of questions though: when you first read existing ECU data, I'd been hitting "Read ECU" on F4 instead of changing job to "codieren lesen" and then "Execute Job". Is this wrong? The other - when NCS dummy loads up the .TRC file, I click the drop down for "Module" and I don't see the same ECU modules I do in NCS Expert - e.g. there is no "CAPPL" module in there, and there are multiple CAS modules. Why is this? Really appreciate your help!

Crazy,i have a small Victorinox too :))

subbed

In the list of modules you always choose CAS.C05, but you have other CAS modules available. Why did you choose that one? How to know which one should be used?

Hi, that was a great video. Please can I ask where I can get the NCS Expert profile from? I have all the software but only the default and NCS Dummy profile.

@ecologicaltime

4 жыл бұрын

please check BMW forum and search for the NCS expert. www.bimmerfest.com/forums/

We wait you to BACK, and you WILL BE BACK. Once a terminator always a terminator.

good

GET DOWN!! GET TO DA CHOPPAR !!!!!

how did you get expertmode on you profile to select?? mine doesn't show it

great video, thanks. Do I use it for f series as well?

@jozefautersky4725

3 жыл бұрын

can i use this softwares for my bmw f series?

@ecologicaltime

3 жыл бұрын

no this was e series

great video mate! any idea why when i try it on dummy it doesn't give me the option to tick or untick any boxes? its bugging the hell out of me, so technically i cant code anything!

@ecologicaltime

3 жыл бұрын

select the next option in the list.

Did your car not have comfort access from factory? So they have the module in the car and it just needs activating?

@ecologicaltime

3 жыл бұрын

had comfort access

hey man, I am trying to import the. trc file into dummy, it says unresolved function keyword "bremslichtschalter" make sure chassis and module are correct... however if I import nettodat.trc I can get it to read on bc1 05 but not 02 or 03? any idea? can I just edit text file manually and flash that back?

my comfort access not working on doors but it not working aswell as push start without inserting key- do u think it might be something else

does this work for BMW f01 models what is a 2009 750

Question I didnt have on my bmw e46 bc button on left side, so i installed it but now i need to code it, where in NCSExpert i can find where to activate BC button from there and see if it works ? What modue does that bc button belong inside ncsexpert ? Thx in advance

Head to the Chopper!

how do you activate the fuel pump for e39 on ncexpert

hello friend., is the NCS dummy program comes with ncs original program or seperate? thanks

@ecologicaltime

8 жыл бұрын

separate, i got the dummy off a forum

When you work with WinFKP to code, do you start the engine completely or just leave the engine on IGNITION ON only?

@ecologicaltime

7 жыл бұрын

sorry i cant recall.

Hey is it possible that u could make video about how to install NCS expert and how to setup whole system for complete newbies like me? I have looked on youtube and there are hardly any videos about it.

@ecologicaltime

8 жыл бұрын

+harshsmi i should have done that when i installed mine years back. I am going to get a new tablet. When i do, ill install all this on and do a video.

@harshsmi

8 жыл бұрын

+ecologicaltime Cheers mate that would be very helpful. I am actually looking for ncs expert package to download but cant find anywhere. I tried to download from ncs-expert website but that didnt work and setup keeps failing. Most of the guides have older info which doesn't help either :(

@ecologicaltime

8 жыл бұрын

harshsmi i dowloaded it from a bmw forum a few years back

Friends, I think I did a wrong reset. When I locked the vehicle with the remote and got off, it took about 5 minutes. It doesn't open with the remote. Open with the key. After that, the remote unlocking is activated. And only the frame lights of the radio are on.

I follo the steps. Load profile .. f1---f3--chasis my is e90 then cas then f6. But after this wont give me the option. F4. To process ecu. Only gove me option **f3=process car*** What do you think is wrong ?

Look look look, it's all in the way he says "here" [heeyah] and "place" [plyce]... so if I were a betting man, I'd guess hes South African. Not the goddamn terminator! PS great video, probably saved us ideots a bit of time and from bricking our ecu's. Haha

@ecologicaltime

5 жыл бұрын

yes South African

Great video got my car coded! Just had a quick question, as I was exiting NCSDummy he said that it recommends me to erase the FSW_PSW.MAN Folder which I click to confirm to erase that. Just want to make sure I was okay erasing that. Thanks!!

@ecologicaltime

5 жыл бұрын

you can erase it. Just remember that before running SG_Codieren, always make sure the MAN file has the correct data in. Thats why the NCS asks to wipe the file clean so that you dont accidentally code another module with the wrong data

when i choose to lessen a file can i turn off the car and come back alter with the finished file or i always need the car on and plugged in while editing?

@ecologicaltime

3 жыл бұрын

car is not fully on, its just in the auxiliary position and yes it must have the onboard computer on.

HOW DO YOU GET THE EDIABAS SERVER , CUZ I HAVE ALL THE SOFTWARE BUT NOT EDIABAS SERVER? CAN YOU HELP PLEASE MANY THANKS

How did you start the Ediabus Server?

@ecologicaltime

6 жыл бұрын

it starts when you launch the INPA software

i dont have the nxs expert profile only the default profile and when i try to edit it with the password rexpet it doesn't pop up the menu where i can edit the profile

Can u help me i change my radio on a bmw x5 e70 and I just need to coded the GPS cuz is not working so can u please help me with that

Why were those settings disabled in the first place?

@tobiasherrmann5817

3 жыл бұрын

That question should go directly to u r own BMW Dealer... There is a lot of more features which are not used...

my Inpa doesn't have the chassis in there. your too,do you know why???

@tobiasherrmann5817

3 жыл бұрын

😂 u r funny - if you don’t write which chassis do you use - how he can answer???

Hi please tel me sir if the cas dont need coding for settings can o just code it without doing the trace file settings with nc xpert?

@ecologicaltime

4 жыл бұрын

dont understand your question. Settings? vs Coding? what settings

@kathijakhan2548

4 жыл бұрын

Bro im useing frm module second hand from same type bme e90 the frm settings are same dont need to modify TRC file can i just code it without modifying the TRC FILE?

Please can you tell me what I do with this problem I have. My mini r55 has a stereo from another mini. BMW can't recode it. Can it be done?

Hi there, Is this work on bmw f series?

@ecologicaltime

3 жыл бұрын

no its e series

I'll be back!

Hello, adaptive headlights eror disable for Please Put video

I don't have any "check boxes" in NCS DUMMY. It just translates. I give up soon.. After i read the module I only get a notepad file and when I'm trying to save the file as "MAN" I'ts still just a notepad file and it's not saving my changes after i execute job.

@ecologicaltime

4 жыл бұрын

i think you are selecting the wrong option in NCSDummy, sometimes there are different sub options. Try different ones until you get the check boxes.

@estranged85

4 жыл бұрын

@@ecologicaltime I tried import a "empty" MAN file, then I got the check boxes but every box was unchecked. But I think I found a way.. gonna do some testing later 👍 My biggest problem though is that the files never converts to "MAN" files. It's just "FSW_PSW" as notepad files.

@estranged85

4 жыл бұрын

Update: now I got it! I saved the file in "save as" and saved it as a MAN file. Then it worked.

@bobwright6588

2 жыл бұрын

@@estranged85 thank you tox. I'm beginning to comprehend that I don't understand coding. But. I can buy and wreck another car. Or buy a 22k Honda.

you are really not helpful in the way you navigate and select menu items. If you had used just a little more time, you would have saved me a lot of time.

@tobiasherrmann5817

3 жыл бұрын

🤔 you know that you can stop the Movie on KZread with using the || ?