BMW B58 Oil Change DIY

Автокөліктер мен көлік құралдары

Here a DIY on the b58 oil change.
0w20 Oil, 6.4 quarts
HU6022Z Mann oil filter
32mm socket for oil filter cap
17mm oil pan plug

Пікірлер: 46

  • @ss-fw7bv
    @ss-fw7bv4 жыл бұрын

    Thanks- quick, appropriately detailed, easy to watch & listen to.

  • @chesterboy9661
    @chesterboy96613 жыл бұрын

    Can tell by the colour of his oil when it came out that he changes it regularly! Great video my friend! Changing the oil at more regular intervals will keep your engine great !

  • @deacon_leon
    @deacon_leon3 жыл бұрын

    This is my second time having to watch this video before an oil change. Thanks for making it 👍🏾

  • @matkins15
    @matkins153 жыл бұрын

    great video. straightforward and helpful. thank you

  • @tonycorrales2468
    @tonycorrales24683 жыл бұрын

    Quite admirable and thorough...

  • @sportsmachinerr1401
    @sportsmachinerr14012 жыл бұрын

    Good tutorial. I change mine every 6k too. I opt for 0w40 though as I like to push the engine.

  • @albert427
    @albert4274 жыл бұрын

    Nice job.

  • @room101rats
    @room101rats4 жыл бұрын

    great video. Thank you.

  • @mikesloper7112
    @mikesloper71123 жыл бұрын

    Many thanks, I will be following your lead & change oil & filter between 'official service intervals' Oh, to have such a basic dip stick, now the only way to visualise the oil is when its emptied.

  • @Bleek17Six
    @Bleek17Six4 жыл бұрын

    Simple. Thank you

  • @lukaszhodyjas
    @lukaszhodyjas3 жыл бұрын

    Thx man awesome!!

  • @bubbyharvey
    @bubbyharvey3 жыл бұрын

    Great video my man.. fellow Jamaican ? 🇯🇲

  • @raybutts9133
    @raybutts91333 жыл бұрын

    has anyone had the filter sheared off with the bottom of the filter stuck in the housing? If so what tools did you use to remove the remaining part of the filter?

  • @itzahstickup
    @itzahstickup3 жыл бұрын

    Ty

  • @raybutts9133
    @raybutts91333 жыл бұрын

    FILTER IS PRONE TO SHEARING WHEN REMOVED. READ BMW BULLETIN TSB# B110120 BEFORE STARTING THE OIL CHANGE.

  • @radieseltech6417

    @radieseltech6417

    3 жыл бұрын

    Thank you for sharing.

  • @wummrs
    @wummrs Жыл бұрын

    Are you supposed to change the filter and then drain the oil as you demonstrated?

  • @rockm4366
    @rockm43663 жыл бұрын

    Thanks. The access to the filter is now much more difficult than the N54, N55, N20, S55...etc...my tool to open the filter housing is no longer useful!

  • @drexellake4051
    @drexellake40513 жыл бұрын

    Doesn't anybody used a torque wrench anymore?

  • @aldosayshi782
    @aldosayshi7822 жыл бұрын

    Where did you buy your swivel?

  • @georgemichaelides4500
    @georgemichaelides45002 жыл бұрын

    Just between the standard bmw services is it still beneficial to simply change the oil and leave the filter in its place anyway?

  • @radieseltech6417

    @radieseltech6417

    Жыл бұрын

    I suppose you can, but my OCD will drive me nuts.

  • @MH-bv8ub
    @MH-bv8ub3 жыл бұрын

    Usw another oil . 5w40

  • @L110508
    @L1105083 жыл бұрын

    It's much safer to just use an extractor to pump out the oil, since the filter is top mounted.

  • @ke5146

    @ke5146

    3 жыл бұрын

    Should not use that gravity is all you need if so so the quantity changes

  • @kbrascco
    @kbrascco3 жыл бұрын

    Personally I believe draining the oil before changing the filter is better

  • @JTRUMBC5775

    @JTRUMBC5775

    3 жыл бұрын

    It’s a great logic to have but you got to remember it’s a canister filter and when you undo the canister filter you’re letting any oil that’s lodged in the filter or in the housing when you loosen it, you’re allowing that oil to go back down to the pan those eliminating any left over old oil. also being on top if you replace it right away it lowers your chances of forgetting to replace the filter for example if you were in a hurry.. but nothing wrong with your way. Everyone has their own way of doing things you know

  • @pettersaethre

    @pettersaethre

    2 жыл бұрын

    @@JTRUMBC5775 same result if the drainplug is still off

  • @joseperez2372
    @joseperez23724 жыл бұрын

    What is the correct oil to use in a BMW B48 engine?

  • @M3E92V8

    @M3E92V8

    4 жыл бұрын

    i bought 0w30 ll04 from bmw itself just to be sure, for my b58, i think b48 is same oil

  • @terminator4974
    @terminator49742 жыл бұрын

    Need to warm motor before change?

  • @radieseltech6417

    @radieseltech6417

    Жыл бұрын

    Just a little, not full operating temperature. The hot oil can burn you, so just warm 2-3 minutes is good.

  • @GoatThePetOfSatan
    @GoatThePetOfSatan3 жыл бұрын

    How many mm for the bottom oil nail ???? ( you said filter 32 )

  • @JB-vy5cc

    @JB-vy5cc

    2 жыл бұрын

    32 mm socket

  • @terminator4974
    @terminator49742 жыл бұрын

    Same for g30 5 series 2017? 540i

  • @radieseltech6417

    @radieseltech6417

    Жыл бұрын

    Yes. This is a 2016 BMW 340i.

  • @matthias_372
    @matthias_3723 жыл бұрын

    In Germany BMW recommends 5W-30 for this engine. In which country are you located?

  • @GoatThePetOfSatan

    @GoatThePetOfSatan

    3 жыл бұрын

    US - 0w20

  • @codskilclanchannel6420

    @codskilclanchannel6420

    2 жыл бұрын

    I’m gonna try to use 0w30 now, I live in north east US

  • @richalbertus2909

    @richalbertus2909

    Жыл бұрын

    my 2022 B58 came with 0w-20 in the USA

  • @CarlosAlberto-yu8cs

    @CarlosAlberto-yu8cs

    Жыл бұрын

    My 320M G20 manual (Brazil) recomends since 0w20 until 5w40 (I use the Last one). Mine is B48B20A stage 1 260whp

  • @zullu5783

    @zullu5783

    9 ай бұрын

    You are right! Im gonna change oil in mine( X3 m40i b58) these days in Bucharest romania , and the dealer service programe said 5w30 type of oil . My wild guess here is because of continental temperate climate in this part of the world😊

  • @adnankaja472
    @adnankaja4722 жыл бұрын

    I like to change my oil every 4k

  • @tonymallia1940
    @tonymallia19403 жыл бұрын

    What was the Tq setting for the oil filter cap and drain plug?

  • @BSed31

    @BSed31

    3 жыл бұрын

    Both are 18 ft/lbs. Or 25 nm if you use that measurement. Hopefully you got this info from someone else though as you asked 3 months ago!

  • @deshawnpoindexter6221

    @deshawnpoindexter6221

    3 жыл бұрын

    18 ft/tq

Келесі