I have a similar situation where my cluster failed and I put one from a different car in, it works, but now the oil warning light is permanently on even though the engine oil is fine. Is this just a matter of coding the cluster to the car?

@DaringBeefcake

2 жыл бұрын

I would have expected there would be more issues with abs and airbag lights staying on, so if it’s only the oil light may be worth checking the oil level sensor by reading fault codes and deleting them, that may get rid of the light but may come back and then you may have to change the oil level sensor, which is located in the sump.

Silly question I know but did you also try the cluster test ? If so what happened. My Abs Asc and handbrake lights are On . Speedo does not work and total milage stays the same even if I drive . Did a cluster test everything moves as it should ...

@DaringBeefcake

4 жыл бұрын

No, as far as I remember I could not do anything it was just dead.

@brandonjones2084

2 жыл бұрын

im a year late but its your rear driverside (LHD) or passenger (RHD) abs sensor lol

@andyking05

5 ай бұрын

??

Just had the same issue on mine. Did you find a place for repair,

@DaringBeefcake

4 жыл бұрын

Daniel Fernandez LMT i sent it to a place called ECU testing where they check it and if found faulty they fix it and send it back. You can call them and ask them for the cost as I don’t remember.

I think its silly the cars don’t have some type of information storage so you don’t need to look for a cluster with the same mileage.

@davidhall3747

Жыл бұрын

The PCM records the actual mileage of the vehicle.

Could it be anything with the fuse box ?

@DaringBeefcake

3 ай бұрын

It could be yes. Depends on the faults you’re getting.

Hello, I'm from Indonesia. I have the same complaint as the video, how to solve it? Do service the speedometer or check the wiring. I checked all the fuses, none were blown, all connected. Please help me

@DaringBeefcake

2 жыл бұрын

May be try to disconnect the instrument cluster and reconnect and see if that helps, sometimes the connection can get dirt around it. Otherwise it may need to be repaired.

@hudamft4060

2 жыл бұрын

@@DaringBeefcake I have opened the socket again, I have replaced the fuse, but there is no change

@DaringBeefcake

2 жыл бұрын

@@hudamft4060 I mean you need to take the instrument cluster out and clean the contacts behind.

@hudamft4060

2 жыл бұрын

@@DaringBeefcake I have cleaned it using contact cleaner, the result is the same

@DaringBeefcake

2 жыл бұрын

Ok it looks like you have a faulty cluster, so there are some companies that check the microchip in the cluster and repair it. So it looks like that’s the next step.

What is an HBI Check ?? 🙏🙏

@DaringBeefcake

10 ай бұрын

HBI or HPI ? Did I say something like that in the video ?

need to reprogram the new cluster 🤔

@DaringBeefcake

2 жыл бұрын

yes of its from another car it needs reprograming

Immobilizer?

@DaringBeefcake

2 жыл бұрын

What about the immobiliser ? I had no issues with that just in case.

Was your radio workings?

@DaringBeefcake

Жыл бұрын

Yes it was.

@andyking05

5 ай бұрын

I've got this problem but my radio isn't working either.... HELLLLPPPP

@andyking05

5 ай бұрын

Have you had this bit with radio too

I change the cluster instrumentos but the light inside dont work whay??

@DaringBeefcake

9 ай бұрын

The lights inside of the cluster don’t work ? Have you checked the fuse.

@ahmadtalhouk2275

9 ай бұрын

@@DaringBeefcake yes all fuse work perfect. On old odometer the light in side odometer was working great.thats why I am wondering

@DaringBeefcake

9 ай бұрын

@@ahmadtalhouk2275 well it may be that the cluster you installed is faulty , where did you get it and did you see it working?

Mine just did that and makes no since I even swiped out the cluster and still does the same

@DaringBeefcake

Жыл бұрын

So if you swapped the cluster and still not working then you might have a problem with the wiring, a fuse or the fuse box..

@brendam455

Жыл бұрын

@@DaringBeefcake I checked all the fuse in glove box under the hood can't seem to find anything

@DaringBeefcake

Жыл бұрын

@@brendam455 have you plugged in an obd scanner ?

@brendam455

Жыл бұрын

@@DaringBeefcake yes and no codes

@DaringBeefcake

Жыл бұрын

@@brendam455 ok well it sounds like you need to start checking for power on the cables with a multimeter. first make sure there is power on the fuses that relate to the instrument cluster and then check for power on the wiring that plugs into the cluster..

Hello, i have got the same problem, i bought an another one second hand, but when i changed it, the cluster turn on but the car don't start. Now, when i replace the old. The car don't want to start too. And definetly, my car don't want to sttout. Can you help me. I'm from France. Excuse my english. Thanks a lot

@DaringBeefcake

2 жыл бұрын

Technically the car would start even if the cluster is not plugged in, so it is possible that something else has happened while u were working on this, I’ve had issues like that before. Is the engine cranking? If it is then you may need to check if there is fuel at the fuel rail. If there is you may have to check if you have a spark going to the spark plugs.

@lapin79000

2 жыл бұрын

Yes the engine crank but don't start. I will do some research. Thanks a lot

@DaringBeefcake

2 жыл бұрын

@@lapin79000 ok no worries I hope you find some clues. So far my issues with non starting have been fuel related on my e36 and e39 though once the relay for the fuel pump went bad on my e36.

@hayallerimiz9128

2 жыл бұрын

@@lapin79000 iyi gunler 46 tim marş yapiyor calismiyordu kontak termiginde buldum termige bakmanizi oneririm saygilar tenku