Thank you for making this video. I'm looking to install the BMR motor mounts on my s550. I'm sure your video will be a great help. And thank you for your service to our country.

Did you have any problems afterward with the oil pan leaking? I ask because I thought you're not supposed to lift the car from the oil pan. Thanks for the video. it is very interesting and informative.

You’ll want to put a heat shield on your starter to protect the solenoid.

I believe you may have a bad pax side header. The video from +/- 7:50-8:00 shows the frame rail side down tube very kinked. It should not be like that IMHO. Also, the header should not be rubbing on that frame rail in the first place as all reputable manufacturers (Kooks, AMR, etc) have proved their headers will fit without clearance issues. Has the vehicle been involved in a heavy crash that has bent the frame? Engine removed and replaced for some reason? Something is very cockeyed. The BMR motor mounts are a sweet upgrade but they are not needed for LT header clearance.

Not to sound like an old lady here but man, I am not diggin your jackstand setup for this job at all. Your car is at such a steep angle with those stands that high and nothing under the rear wheels that I'm not sure you're seeing how much forward force there is on those stands. I've personally seen three different guys crushed under cars. Two with jack stands and one from a two post lift. None of them survived. Please for your kid's sake rethink jackstand placement for future jobs. Personally I don't like 'em but you can make them safer. Put two more in the rear or put the rear on race ramps so the car is level for starters. Came here for the BMR MM install, commented for your safety.

@RobertYayo

3 жыл бұрын

Those type of jack stands are safe 2 tone lock security

@SCRmitch

10 ай бұрын

@@RobertYayo he’s talking about horizontal forces, like the jack stand pushing forward

@andrewslagle1974

7 ай бұрын

Just block the rear wheels front and rear and slide the tires under the rockers on each side for added safety!@@SCRmitch

After a month. Any reviews. Of motor mounts like or dislike ?

@vanhammerhp3248

4 жыл бұрын

Wouldn't get them unless you were doing a race application. I ended up taking them off, my engine started making an internal noise that stopped after I took the off. Maybe it didnt like the added vibration. Not sure. Sorry haven't kept up to date just crazy busy with work and holidays.

@douglasbaker5949

2 жыл бұрын

I put them on my 2015 GT and love them . Not that much NVH. Mostly around 30 mph feel through steering wheel slight vibration not much.

@AtticAZ

Жыл бұрын

@@vanhammerhp3248 thanks got the input on the noise and vibration. I’ll keep the oem mounts for sure.

How bad is the shaking

@vanhammerhp3248

4 жыл бұрын

There is noticable vibration. Not that you can visibly see like the steering wheel shaking. At highway speeds its smooth. Around town it would get some getting use too, but I do think with some break in and driving you could get use to the vibration.