Blown Alcohol Ink Tumbler
This is how I make my blown alcohol ink tumbler!
White Shimmer Tumbler (For base) : • How I make a white shi...
Epoxy Used: Amazing Clear Cast
Alcohol Inks: Tim Holtz and Brea Reese
All purchased from Amazon
Canned Air: MAX Professional 1229 Blow Off Mini General Purpose Air Duster Cleaner, MB-111-229 (3.5 oz) www.amazon.com/dp/B0013KS3IC/...
Acrylic Sealer: Krylon K01303007 Acrylic Spray Paint Crystal Clear in 11-Ounce Aerosol www.amazon.com/dp/B00023JE7K/...
100% Acetone
If you have any questions, please comment and I will get back to you!! Thank you for watching! 🥂
Пікірлер: 103
I love ALL of your tumblers but this us my very favorite so far! Thank you for sharing this technique!
I love the splatter effect you get on the rest of the cup! Beautiful!
I've never seen this technique before! How cool and beautiful! Thanks for doing this tutorial Lela!!
I’ve had this idea in my mind on a burst tumbler I wanted to make, and this is the perfect technique for it!! I wasn’t sure how to approach it and this was so helpful!! Thank you!!
what a really cool technique!
I can’t wait to try this, beautiful! Thank you for the video 😃
Thank you for sharing 🙏🥰🤩 great idea!
I like it, so very cool. Ty for your time and showing this technique.
You’re incredible & your videos are super dope! I made my first tumbler yesterday after watching a few of your videos and will start my second and third tonight! I lovvvvvve this design and I’m so anxious to try it out tonight. 💕
Wow wow wow this is amazing
THANK YOU SO MUCH!!!! I am about to make this one but with white and 1-2 greens only. Let's hope it comes out as cool as yours!
Thank you for this video it was most helpful as im looking at using alcohol ink on a up and coming project.
Looks great x
I’m gonna try this looks like fun! Turned out great
I Loveeee Thisssss. I Will Most Definitely Try.
Love it!!!
OMG I love this!!!
@MissKissKreations
5 жыл бұрын
+Bethany Hawkins Thank you so much!!!
Love it 😍😍😍!!!
I love that I have everything to make this already. Love this. 😍😊
I’ve never seen a cup so unique
It's so beautiful!
@MissKissKreations
4 жыл бұрын
Thank you so much!
@kylakoo91
4 жыл бұрын
@@MissKissKreations of course! Quick question! The epoxy is fully dry before you start with the method, correct? I know some of the other methods you do it while the epoxy is wet so it blends in.
thank you I love this
@MissKissKreations
5 жыл бұрын
Smiling Still Thank you so much!!
Now that is bad ass I gotta see how u made it
You could use alcohol to clean spots too I wipe my resin projects with it all the time...and alcohol can liten inks and clean it up
Omgoodness. I love this too. Ur gonna have me ordering up supplies. Now I "need" a can of air 😂
@jaiknight6130
3 жыл бұрын
Hopefully you have started your journey!! I do acrylic pours and her channel was on my recommended list. As a result I have binge watched 6 videos and yep. I’m ready to order some supplies🥰
@janellchantal
3 жыл бұрын
Hi. I actually did. But i have since traded in my epoxy Tumblers for sublimation tumblers. Did u start yet??
I’ve tried making this cup twice now. And it turns out great for the most part. However when I add painters tape to the cup to keep the paint marks from going all the way up the cup I notice that the air either forces it under the edge of the tape or it bleeds through the tape and then alcohol dosen’t make it come back up. Any suggestions to prevent this. On the second on I have applied painters tape to where I want this to stop and have resprayed the top half of the cup with white spray paint, but would like to not have to do this in the future. Thanks!
AWESOME! I have some cans of "Krylon" Triple -Thick Crystal Clear Glaze and UV Archival 1375 GLOSS, can I use any of those in place of the Acrylic Sealer?
Hello Lela... this is so cool and makes a awesome design. Thanks for inspiration my mind is all over the place on making something new with this technique.. loved this video. hugs Sheryl 💙🎨💙 Christmas colors, fall, browns...I wonder if the metalic and pearls would work? Hummmm will have to experiment.
@MissKissKreations
2 жыл бұрын
Thank you and great idea!! 😀
Thanks Kiss. Xo
New friend here and just found you and omg I realy love this thanks for sharing✌❤from ok m Wildeys
So would you coat it in something like spray or mod podge or epoxy again after ? Would any make it run ?
I ended up letting the resin dry before adding alcohol inks..could I just add another layer then jusy add inks?
How would I do this if instead I wanted it with glitter?
Is this being applied over wet epoxy , similar to glitter epoxy method ?
What is the purpose for the acrylic coating?
Is the epoxy dry? When you blow
Hi I am thinking about trying to make some mugs like you do.. however I'm confused on how or where I can get the lettering or different designs to put on the cups or mugs
Beautiful!!!!!Thank you!for sharing. I do have a question, so there is no need to sand in-between epoxy coats????
@MissKissKreations
2 жыл бұрын
You can sand. But if the tumbler isn’t bumpy or uneven, there is no need to sand.
Adiabatic cooling it's ok if can gets cold it's from pressure if it didn't then worry...it's bad or empty
@MissKissKreations
4 жыл бұрын
Kelly Gallo If the van gets cold, I just wait a couple moments until it cools down. But it doesn’t get cold until the end because I don’t spray too much
Hi..can you make a design (heart) using the alcohol inks?
How long did you let the epoxy dry before u used the ink?
My tumbler is a bit bumpy. Can I sand then do this or can I just leave it bumpy and it come out smooth?
Did you let the epoxy cure before you blew the alcohol ink on the cup? And then sealed it with the Krylon clear coat?
Can this be done on glitter before epoxy?
So you spray paint it white then clear coat then ink?
Could you do this with a black back ground ?
Can this be done with crystalac also?
Did you put down a layer of epoxy first before putting alcohol inks on?
I do not have alcohol ink but rather resin ink, would that work?
Does the Acetone not hurt the epoxy?
I actually like the little speckles. How can I just get this small speckles only?
@beauteakey
4 жыл бұрын
Flick the bristles of a small brush, or even a tooth brush
You said you had already put epoxy on this and let it cure prior to the alcohol ink?
What do you cal the can of air ?
whats your favorite epoxy?
Could I do this blowing through a straw instead? It’s going to take a week to get my can but I’ve got plenty of hot air already here. 🤷🏼♀️🤣
@angellashbaugh3816
4 жыл бұрын
I don't think using a straw works very well at least when I did it it didn't.
@justwingitkreationsbyleigh1301
4 жыл бұрын
I use a straw so I can control the ‘spray’ more ...
i see you painted white then a coat of epoxy before blowing ink...if you use acetone to remove splotches won't it effect the epoxy that you blew the ink on? I am new to this and love this technique and want to do it right!
@MissKissKreations
5 жыл бұрын
+Kim Cropper Thank you for watching!!! I make sure I let me tumbler sit for 24 hours before I blew any alcohol ink on the tumbler! Acetone doesn’t remove any of the epoxy. Once taken off with acetone, I would wash the tumbler down with dawn dish soap
@caroljeuck4645
5 жыл бұрын
Kim Cropper you could use alcohol to remove any over spray instead of acetone.
@kimbryson3585
5 жыл бұрын
Thanks!
@kimbryson3585
5 жыл бұрын
@@MissKissKreations thanks!
How much do you sell your tumblers for?
So my alochol inks are drying on the epoxy. it just pools up and runs! Any advice?
@MissKissKreations
4 жыл бұрын
May not have enough epoxy on the tumbler.
I sprayed with 2x restoleum matte clear coat...it started to run all over...the clear coat you use doesn’t do that?
@karlyskreations
4 жыл бұрын
That's what I use too and wanted to know if it worked. Did you get it to work?
I’m trying g to do mine and the resin keeps splitting if that makes any sense
@408_miguel_4
3 жыл бұрын
Those are called fish eye it happens becuase epoxy repels alcohol -- seal it really good like multiple times
If you are sealing with epoxy again, why the Krylon clear? Does it seal the ink? Will it run with just an epoxy coat? Sorry new to the world of tumblers.
@MissKissKreations
4 жыл бұрын
The Krylon seals the inks in place. If that isn’t used, the ink would run and tend to fade more
What tool are you using to turn your cup?
@MissKissKreations
5 жыл бұрын
+Lynn Schmitz The tool is a cup turner or a tumbler turner. They are Available on Etsy, Michaels, EBay and Amazon!
I tried this and failed miserably. My ink ran all over the cup. Any idea how to stop that from happening?
@MissKissKreations
4 жыл бұрын
Practice makes perfect. Keep doing it. Do it slower and you will get it down
I blow thru a straw...can air is how much?
@MissKissKreations
3 жыл бұрын
A million ways to get from A to Z. And it depends where you reside. You can find it on Amazon.
Question, can I do this method of alcohol ink on glass? Do I spray paint the glass white white matte and then coat with epoxy before doing the alcohol ink? Has any one done this ?
@MissKissKreations
4 жыл бұрын
I think that is a great idea!!! Only thing, I’ve never epoxied glass, I would look up if it is safe to epoxy glass. Other than that, I think it would look fabulous !!
Can I spray the alcohol inks on the cup before I seal it with epoxy ? I’ve already spray painted my cup white , but I haven’t sealed it with epoxy . Can I use a acrylic sealer to make it a little faster ?
Do you resin the cup first and let it dry? then apply the ink ? IF so how long do you let the resin cure for before the ink?
@MissKissKreations
4 жыл бұрын
That’s correct. For this one I resin then let dry or cure for 15 hours ( at least) then I apply the inks. After inks are applied, I resin again.
When I did this with other alcohol inks, My ink didn't dry right away and I turned it for a few hours.. It just moved into little puddles of ink. Is it because of the ink I have or because of the epoxy?
@MissKissKreations
4 жыл бұрын
Hmm. Did you use alcohol ink? And did you make sure your epoxy was dry before alcohol inking ?
Could you use a blow dryer
@MissKissKreations
3 жыл бұрын
That would be a good idea. I would use it on low and have the blow dryer further away from the tumbler
Why do you use acetone with alcohol inks? Can't you just use 91% alcohol?
@MissKissKreations
2 жыл бұрын
You can. Someone’s the alcohol doesn’t wipe away the inks as much as I want it to. So, I use acetone sometimes.
Alcohol takes off spots ..
sorry, can hardly hear you, and i have MY volume all the way up...