Wow. These look so easy to install. Not sure I want to reduce so much window space but these look lovely. Thank you for the video

Just done my blinds thanks for your video ♥️🏴󠁧󠁢󠁳󠁣󠁴󠁿

I’ve just received some blinds from Blinds2Go, I can’t fault them, lovely blinds the right size and less than half the price of local company, love your dog

@noelkrusty_

2 жыл бұрын

I was a bit sceptical when I saw their advert, seemed too good to be true, but we took a chance and were really pleased with them. We've now done the living room, kitchen and a set of French doors. Can't believe how cheap they were compared to other options! ( The dog looks great, but he's rubbish at DIY..)

I was just looking at these and you have made the purchase a no brainer 👍

@noelkrusty_

2 жыл бұрын

we're really happy with them, been in over 6 months now and no issues whatsoever. we'll probably get some more for bedrooms at some point. glad the video was of some help

@emmajane7745

2 жыл бұрын

I wanted to ask, my window fitters used beading on the inside of the windows, how much space does the overlay take?

@noelkrusty_

2 жыл бұрын

not sure without measuring mine, which I will try to remember to do later. think it gives you a dimension on the measuring guide on the website, from memory. we were a bit borderline with handle placement measurements, but ok when actually fitted.

Awesome

Fabulous , Thankyou

Hi Neil, great video. How well would you say the perfect fit Venetian style blinds block light? Difficult to tell but it looks decent on the right hand window you closed at the end of the video.

@noelkrusty_

Жыл бұрын

Hi, sorry for delay in replying. They're pretty good at blocking light. Obviously not perfect as there are holes for the strings to go through, but we have the complete downstairs of our house done with them now and don't use any curtains or anything else. You can see bits of light if a car goes by etc but only tiny amounts which sort of depends what's outside your windows also. When funds allow, we will probably do all the bedrooms too, as they're so neat and tidy. Relatively easy to clean too and can be popped out of the clips to clean the window and frame behind easily. Hope that helps

Bit of an ignorant question from me, but are we supposed to be jamming things between the window frame and the gap? Isn't it made that way for insulation?

@noelkrusty_

2 жыл бұрын

Good question. I assume if you ask the window manufacturers they'd say no, but in practice it's fine. The inside of the window is the "warm" side of the glass/unit so it's still sealed on the outside and around the edges and everywhere else, so you effectively just deform the rubber locally in 4 small areas inside the house, so there is no issue with heat transfer/draught in practice. Obviously, that's just my opinion. Hope that helps

@TravelWithBradley

2 жыл бұрын

@@noelkrusty_ thanks :)

Thanks for sharing the installation - looks great! How do u remove them to clean the windows? Thxs

@noelkrusty_

2 ай бұрын

They pop back out really easily, you just push in the retaining lump on the 4 brackets and they slide straight off. You might need something a bit harder than your finger to push the clip back, but it's a simple job that takes a few seconds

@stellajefferson3972

2 ай бұрын

@@noelkrusty_ Thank you very much! Your video and reply has certainly helped me to decide to order them!

These look really clean and professional. My place has newly fitted windows and there doesn't seem to be any give between the rubber seal & glass.... I feel like I'd be damaging the window if I attempted to slide anything in. Any ideas on this? Thinking perhaps I need a professional to come out and assess the windows or is this normal in your opinion.

@noelkrusty_

2 жыл бұрын

the brackets do feel tight when fitting into the rubber. any sort of lubrication makes it much easier. I would suggest looking on the blinds to go website at their fitting instruction video, which explains how to check if your window is suitable. from memory, it's trying to slip the corner of a credit card between rubber and glass, but it's a while since I did it so please check carefully.

@nkt1

Жыл бұрын

I was a bit worried about that too, but I've just fitted mine with a smattering of washing up liquid, and the seal popped back into position, over the bracket.

@terry4144

Жыл бұрын

a bit of silicon lube works well

Please may I have some advice. I'm struggling if the bracket can squeeze into the rubber seal of my windows. I'm even trying gently with cutting knife but it seems that the seal is very tight to the beading. Should I just push it harder? Thank you

@noelkrusty_

Жыл бұрын

Mine were very tight, but use some water mixed with fairy liquid type dishwashing soap and don't try to push them straight in, start with a corner and sort of slide them in to position. If they are really still too tight, then maybe check if a lubed up credit card will slide in first, to loosen the seal. Hope that helps

@leeyungchau6980

Жыл бұрын

Got it, Thank you so much for your advice

Hi how do you unlock the blind when it comes out the packaging it’s stuck together and I can’t find any thing to unlock it so I can put the frame on

@noelkrusty_

Жыл бұрын

From memory, the top and bottom are pushed together and the cord is wound around one set of end corner pieces, locking them together. You can see this on my video just after I take them out the bubble wrap. Once unwound from the corner brackets, you can open them out to fit the sides

What colour slats did you go for? Was about to make an order for classic white but do like the look of yours a lot.

@noelkrusty_

Жыл бұрын

We went for a grey that was similar to our kitchen worktops. We have white in other rooms. One thing worth knowing about the darker colours, they heat up with the sun on them, so if we have a lie in at weekends and it's nice and sunny, you can really feel the heat on the room near to the windows.

@TheWuMyster

Жыл бұрын

@@noelkrusty_ That's a really useful bit of info. I have rooms where the glass turn into radiators from the sun so I best avoid darker colours then. Thanks.

How did you measure for these blinds, did you measure from outside edge of bead to outside edge of bead etc..hooe that makes sense

@noelkrusty_

9 ай бұрын

From memory, you measure across the glass from one edge of the rubber to the other edge of rubber, so just the visible section of glass. The website has a good measuring guide on it which we followed. Please check that to be certain and don't rely on my memory, it's been a while!

@icevinyl1876

9 ай бұрын

@neilchristie1442 thank you for quick reply. Much appreciated 🙏

Does it go completely dark when you close it? Thanks

@noelkrusty_

3 ай бұрын

Hi, not quite. There are all the little slots that the strings run through, so there is a small amount of light that gets through, but not enough that it bothers us. If you're looking for blackout blinds, these particular ones probably aren't good enough. Hope that helps

@asmaaelg3453

3 ай бұрын

@@noelkrusty_ thank you 😊

Did the blind come in a pair or did u buy them individually

@noelkrusty_

7 ай бұрын

The blinds are individual, you measure each window to get an exact fit and closing rods on whichever side suits you.

I have just ordered mine… I’m not keen on the different shade of white on the corners… just hope it’s only picks that up on the video not with the visible 😬 eye

@noelkrusty_

7 ай бұрын

Do you know what, I've never really noticed that until now! You're quite right though, there is a slight difference. I would say that on our windows, the corner bits are nearer to what the window frames are, than the blind frames. Notice it more in our living room where the blinds are white also, don't notice it as much in the kitchen/dining room with the grey blinds. I still really like them though after almost 2 years. Hope that helps and good luck with yours!

Better not to use the credit card measurement method.... learnt the hard way!

@noelkrusty_

Жыл бұрын

What problems did you have? We had no issues at all using a credit card sized spacer?