Man, this is the most underrated channel I’ve ever seen. This tutorial does a great job of explaining every step of your process while keeping my attention.

Dude, amazing video! I personally appreciate very much the "why's" you would chose to use certain tools over others. And of course, your comedic time, is pitch perfect. You got yourself a new subscriber.

@brunocastro4558

Жыл бұрын

2

The circle analogy for topology was great, thanks! I always found myself lost whenever working with complex shapes.

@morbuskobold4233

Жыл бұрын

This! How often did i struggle after 1000+ Hours of tedious (actually fun) hard work of modelling the Basic Cube into another superior Basic Cube to fail the Topology and make modifiers unusable. Shame and never again will i get mentally challenged about basic stuff. Proud to be self taught and these Guys making free Content here on KZread are awesome.

I think i have got a better channel to learn some blender and sculpting stuffs. And thanks for providing your knowledge to our generation 😉😉❤❤❤❤

Hello in2vert! Thank you for this tutorial I learned a lot from it. I tried following it and it and my viking axe looks amazing! You have showed me new techniques that i never could think it would be a game changer. You definetly earned a sub!

The quality of your videos is amazing. Also the tutorials are easy to follow and you got me to try out Blender again. This channel will definitely blow up. Mark my words. Anyway, I'm subscribing now, so I can say I was here from the beginning. xD

I'm currently around the half-way point in the video (its been an hour lol) but I've already watched the whole thing before. All I can say is amazing work!! I will definitely watch some of your other vids! 5:42 8:02

Great modeling! 👍 I'm really interesting of texturing process.

Fantastic tutorial, video editing and humor. Subscribed instantly :)

Your video solved my fear of sculpting and now i LOVE It and cannot stop

Hi. Love the video. Best spent 13 minutes probably in my whole life. Thank you!

You have 100% earned my sub here. such a nice flow and high quality video. Personally i really love the small quick asides to explain a concept like the circle analogy, dont see that on other channels.

love this tutorial thank you!! 😀

Thank you! amazing job!

Another great video

I discovered your channel like 2 days ago I love it

Great tutorial. Came for the handle wraps. Stayed for the sculpting

You are really good after just one year. Some people got talent other people don't...

Epic video my man, easy subscribe, hope to see more from you

You deserved a subscription!

subscribed by the sense of humor

Wooowww what a skills.

you just earn a sub my guy

damn bro that was intense! :D Very helpful but sometimes a little bit too fast for me. I had to replay many steps extremly often. Anyway its still a damn great tutorial!!! Thank you for that :-)

Nice

Was here before you were cool ;) Just here to say you are indeed cool and your Tutorials are awesome. Keep going and great for intermediate Users like me, who know the Basics and some of Substance Painter/Design, Blender, Unity and the like. One Question: What do you think about ZBrush for Sculpting? I never got my feet wet with Blender Sculpting after some basic Stuff (Made a Dog aka Creature of Doom) but you make it look so easy for detailing that i think i should invest some serious time into it. PS: I like the addlibs (hammering the stuff into my brain) and the short tutorials. PPS: Masks while sculpting are Killer Feature. Will add it to my workflow after getting confident with sculpting. Thx and greetings from Germany.

Full process videos would be nice timeless ones

To avoid so many polygons, do I need to duplicate the high poly I create and use topology and then use the Shinkwarp modifier? That what you do in the video? Did you do this with the metal of the ax too?

nice

Sorry but when I tried to use the dyntopo on the handle, the vertices didn't increase and it turned all of the quads into tris (idk if thats normal). When i try to sculpt while dyntopo is on it is very blocky ??

hi i had a question, at 7:32 my textures arent coming out smooth, like the are "exploding?" i tried to increase the subdivision but that didnt seem to work. also im having trouble getting dyntopo to increase the resolution on the handle

What if I dont have as many lines on the top as you, would it still have the same effect?

Hello. Can I ask where you got the idea for those glyphs on the axe head? Merry Xmas!

Where did u render? Looks so good. Any chance we can get a vídeo on that?

@henriqueam

Жыл бұрын

@@in2vert Yeap, your result is so beautiful. Would be nice to learn your process.

Pleaase make a detailed animation tutorial

Sir, can you give me the link of the table in the scene and from where you find this also how to get this type details on is this displacement or only normal bump sorry for my weak English ❤❤

hey im new to meodeling in blender and whenever i try to extrude the outline like you do in 3:40 to close the shape it will just extrude in random directions. do you use the extrued tool on the left or is there another way im not aware of? great video by the way!

@in2vert

Жыл бұрын

Just press E to extrude. I think you are lacking blender fundamentals. I would advise you to come back to this tutorial, after you did my beginner course (just 45 minutes to learn everything). Here is a link where you can get the course access for free: in2vert.com/free-course/blender-3d-modeling-for-beginners

"Grab the grab" Lol

hello, I have a question, what site did you go to to download the brushes to do the wood or the Viking details ? thank you

@in2vert

Жыл бұрын

Most of them are created by myself and you can download them on my patreon page patreon.com/in2vert

is there an option to download the axe with a transparent background on your patreon?

@in2vert

Жыл бұрын

There is a project file, with everything set up (camera, etc). You can simply render it yourself.

it is a very nice axe but if i delete the faces my hole cilinder disapears could use some tips

@__Wolly__yt

Жыл бұрын

@@in2vert when i pres the butten delete faces i delete my whole object in stead of only the lines

Do you use 4k or 8k textures on that table or whatever?

can you please drop a full video without timelapse?

Well, first of all my Blender/PC was crashing constantly after starting to work with the multires modifier. And i have a 4070TI so not sure what happened there, maybe CPU couldn't handle it. Whenever i used inflate - crash. Took maybe 40 tries until i managed to do it. But also my model looked completely different (as in MUCH worse). I don't know why but none of the sculpted bits were sharp just all around a blobby mess. Maybe i missed stuff but this tutorial was pretty hard to follow overall.

why grid fill instead of creating a face

i wish there is a deteailed video for sculp mode note: i have low end pc

at 2:30, how is he creating faces so fast? i know the video y accelerated, but still, is the a hotkey?

can we just add sharps by doing shift + e at the edges, or is the knife tool process superior?

@in2vert

10 ай бұрын

You can, but it does not work great on all parts of a mesh, while cutting works always, but produces more vertices.

great i abslotly understod everthing please help i only understood that i should spawn a cylendier

@in2vert

8 ай бұрын

I guess you should start with the absolute basics. Check out my beginner course on my patreon page e.g.

Hello I’m modeling a version of the axe and was wondering where you got the texture for the neck of the axe. I subscribed to your patron for the alpha textures but couldn’t find that one. 7:35

@in2vert

Жыл бұрын

There is a txt file in the zip file describing where to find the ornament. :) you can get them on textures.com in the ornaments section

@Trist111

Жыл бұрын

@@in2vert thank you for the response, but I’m unable to find the axe neck texture seen in 7:35, is it possible that it’s from another website?

@in2vert

Жыл бұрын

@@Trist111 Did you look here? www.textures.com/browse/3d-ornaments/114561 I am pretty sure I got it from here, but there are so many, I cannot find it right away :D

Thx for this.

7:27 Were the link?

In this video the mask tools makes clean lines (and clean circles). But for me the edges are jagged, even though str. and hardness are at 1. Anyone got any ideas how to fix this?

@in2vert

3 ай бұрын

Your model needs more polys :)

dude i wanted to make leviathan axe for my game xD

@in2vert

Жыл бұрын

Than nothing is holding you back!

How did you get LP straps? is it your initial shape without modifiers?

@in2vert

6 ай бұрын

Yes Sir

Thank you so much Sensei (づ￣ 3￣)づ

How do you select loops with proportional editing?

@in2vert

Жыл бұрын

Just as always. Proportional editing does not change anything :)

hey guys if your watching this i recommend you do your own thing instead of following the video other wise you wont learn. do things differently and after this video maybe make 2 more things with what u learned while its still fresh without checking back on the video

Question at 5:29, why not use the sharpen edge tool that exist when using SubD? You dont have to add the extra verts then

@in2vert

9 ай бұрын

Because adding support loops looks better in most cases.

@kevinbjorkman7225

9 ай бұрын

@@in2vert gotchu, thanks for the reply

how on earth is he doing the quick fill with the initial topology in the circle? I can't see the shortcuts he's using. Alt-Numpad 1 and 2 doesn't do anything for me. HELP!

@in2vert

Жыл бұрын

I don't know what you mean, but you can use "Grid Fill" by pressing Ctrl+F

Can somebody please link me the wooden background image he is using at the end.

@in2vert

Жыл бұрын

Its a 3d scan from Quixel.

Can someone please tell me the amount of polygons this axe (would) have at the end ?

@in2vert

Жыл бұрын

About 16k. In my low poly vs high poly video you can see another version with about 2k and how it was done.

how did you retopo the wrapping?

@in2vert

Жыл бұрын

I did not retopolgize it, just removed unnecessary edges and thats it.

how to select it i dont understand pls explain this part what key should i click :0:36

@in2vert

Жыл бұрын

I think you are lacking blender fundamentals. I would advise you to come back to this tutorial, after you did my beginner course. Here is a link where you can get the course access for free: in2vert.com/free-course/blender-3d-modeling-for-beginners

how do you add vertices between vertices?

@in2vert

Жыл бұрын

CTRL-R. Loop Cuts :)

@isakius

Жыл бұрын

@@in2vert do you know why when i go to sculpt some parts of the axe have another grey tone and seem to be cut?

What do u mean by gloots

The bevel at 1:10 is making me lose my mind I can't get it right!

Music please

the mask tool dont work i only se litle squars and not a line

wait till this gangster hears about crease and becomes a level 100 mafia boss with level 50 hot chicks

Bro, only one year into 3D and you got to this level already?? I must be really dumb

@in2vert

Жыл бұрын

The axe was even after just half a year. And you can do that too!

I really wish you'd go slower and show button presses as an overlay.

Music is a bit loud

I would like to buy it or download it and I can't find any link?

@in2vert

Жыл бұрын

You can download it as an patreon supporter :) you can find the link in the description or the KZread channel header

@sergioespinoza1061

Жыл бұрын

@@in2vert im waiting your answer in the website

@in2vert

Жыл бұрын

@@sergioespinoza1061 You mean www.patreon.com/in2vert ?

You never stated this was a video for beginners, but I have to say it wasn't very beginner friendly. You left out quite a bit of important steps and had me confused about when you skipped some parts where suddenly you're model is edit mode sort of resembles what your sculpt looks like, making me believe you have already applied the multiplier? When I'm in edit mode, im completely back to the blockout handle, because the modifier is still not applied.

@in2vert

Жыл бұрын

Thank you for your feedback. Can you please tell me the timestamps so I can fix it for others :)?

@Zippyheru

Жыл бұрын

@@in2vert 9:48-9:50 you suddenly jump to where you have 2 models, skipping the step to create a low poly model? At least thats what confused me

@in2vert

Жыл бұрын

I told seconds before, that I retopologized the model in order to sculpt more details. Retopology is a very boring process, which I do not show often in my videos, since it is just something that has to be done.

@Zippyheru

Жыл бұрын

@@in2vert do you happen to have a video where you show this process? I would like to understand it a bit more :)

@in2vert

Жыл бұрын

@@Zippyheru I have a bunch of retopology videos on my channel. For the axe, I only have the uncut video you can find on patreon.

bro its good but idk why so fast

@in2vert

Жыл бұрын

Because no matter how slow it is, you will have to press pause if you want to follow along. If you just want to watch for fun, than you will get bored if it is slower than that.

@abbasmousa699

Жыл бұрын

@@in2vert lol i guess ur right i just have to get better. Thx for checking me👍

@in2vert

Жыл бұрын

@@abbasmousa699 We all have to learn, and in about 1 month, even this video's speed will be too slow for you :P

Whats the music called

@in2vert

Жыл бұрын

A True Hero - Edgar Hopp Big Big Man - Bonkers Beat Club Summer of 59 - Chris Shards Everything taken from Epidemicsound.

@ScoutLovesHer

Жыл бұрын

@@in2vert THANKS

could you make the video a bit slower

Is there no other method to fill out a shape ? Its extreme annoying to connect all these points by hand... Maybe I just not understand that part all...

@in2vert

Жыл бұрын

yes there are automated ways, but they create bad topology most of the time which is not good to continue working with. You can e.g. just press F or Ctrl+E and select grid fill.

Show low poly next time

@in2vert

Жыл бұрын

Low poly has nothing to do with modeling, just with the topology at the end. However I don't like Low Poly, so you will never see me do this :).

ya im lost im too much of a beginner this doesnt explain well for begginners

too fast

@in2vert

Жыл бұрын

Thanks for the feedback :)

You move to fast I don’t understand shi

@in2vert

Жыл бұрын

Than sir, this tutorial is not for you :)

First of all, something really doesn't make sense in your video! When I delete the vertices of the plane, the plane is completely deleted and I can't add more vertices or extrude to make shapes, like you did. And in addition, you run your actions really, really fast with little explanation, and it is not clear what you click on or what you do to reach certain actions and the desired results. I wish you would work a little slower and take the time to explain what you are doing, even if it meant splitting the video into two parts - that would have been much more helpful.