Thanks dude. Just repaired my trimmer thanks to this video

Thank you friend. Moser is the best!!

Very helpful! Thanks!

I just first time used my whole new Moser 1400 (grey), a precise and efficient machine, very enjoyable to use. I thank you for this video, it helped me to do the things right, specially the screw tightening that is a bit surprising, because it has to keep some release.

@bentleefox4735

2 жыл бұрын

i know im asking the wrong place but does someone know a way to get back into an Instagram account..? I was stupid forgot my password. I would love any tricks you can offer me

@jacegarrett1008

2 жыл бұрын

@Bentlee Fox instablaster :)

@bentleefox4735

2 жыл бұрын

@Jace Garrett Thanks for your reply. I found the site thru google and im trying it out atm. Seems to take a while so I will reply here later when my account password hopefully is recovered.

@bentleefox4735

2 жыл бұрын

@Jace Garrett it did the trick and I finally got access to my account again. Im so happy:D Thank you so much, you really help me out :D

@jacegarrett1008

2 жыл бұрын

@Bentlee Fox Glad I could help :)

Who is the best mozer 1400 or brun 6*1 for myself ?thank you

I tried to clean mine and opend it. Couldnt Open these 2 big screws on top but i opened it at the handle. Now its 3x as loud except if i loosen the screw on the side but now it doesnt cut hair with that.

Hello and congratulations to you... I purchased the type 1400 and I would like to know if I can reduce the minimum cut length, which I now read is 0.7 mm. Thank you very much.

Can you show how to aligment slowly, thanks

Thank you

Are blades exchangeable in 1230 and 1400 models?

Where can i find the compatible guide for the blade of this?

Is it possible to change the moser blade to a wahl blade e.g. Wahl Super Taper blade?

Why dont you offer an exchange blade that can cut shorter than 0,7mm?

Hello great video thank you. I just bought the product and the cutter blade is not exactly parallel, do you think it would be a problem, what should I do?

@NicMediaDesign

2 жыл бұрын

He shows in the video - loosen the screws, adjust, re-tighten.

Hello where can i find the red plastic piece please ? I lost it -_-

Can we zero gap Moser 1400 please tell me sir

I want this product where can I buy this product

Thanks

Bhai iske parts bhi mil jaate h kya delhi m kahi kissi ko pta ho to please reply

is imposible to take out the screws without damage

Where is ur service center in bhubaneswar odisha

Mine fell down from a two feet table and the blades came out. it's Easy to break

My device started not cutting well after this application, but the maintenance you did is not complicated at all and I did it easily. Could I have applied too much oil? can you help me please? Thanks for the video.

@Asiong09

2 ай бұрын

Same with me. Cannot align the blade properly and makes a loud sound! Not cutting at all.

@raggedyguy59

2 ай бұрын

@@Asiong09 I will try to describe it simply. 0.55 pay attention here. This stage requires two people. Align the blade and make sure the blade is in the correct millimeter range (0.7-1.4mm). check again. If ready, let the other person tighten the screw slightly. this much. Remember, you will hold the relevant part of the device with both hands as if it were ready for use. The other person will tighten the bolt. this much.

In Russia sold Moser 1400 (art. No 1400-0451). But I can't find it on the official website of the Moser, or in the catalogues. Tell me, please, is there the model officially?

@WAHLClippersEurope

6 жыл бұрын

Don't worry! This is the official burgundy model.

@malferov

6 жыл бұрын

Burgundy is 1400-0051 with two attachment combs include, and i mean 1400-0451 (gray) with one attachment comb 4-18mm. (art. 1400-0050 with one attachment comb 4.5mm - there is official web site).

@WAHLClippersEurope

6 жыл бұрын

This is because its a consumer version: www.moser-consumer.com/products/hair-clippers/1400-edition There are different article numbers for some regions. This is why its called 0451 in your area.

@malferov

6 жыл бұрын

OK. Thank You. And another one question. All resource declarate "cutting length adjustment (0.7 - 3 mm)"; it is clear that the minimum length of 0.7 mm, maximum 3 mm. And what levels of length 2, 3 and 4? )) This is known? (The same applies to the length of the haircuts for some blades with adjustable length 0.7-3mm: 5 position, but what is it?)

I have this plastic that putting an two bolt, to screw in, that plastic is broken, is there available sale online?

@leviyitzhaqgarbose3523

4 жыл бұрын

e bay Moser 1400 Guide piece 1403-7000

@leviyitzhaqgarbose3523

4 жыл бұрын

kzread.info/dash/bejne/mqmlqpOAc7mcnbQ.html Best repair video!

hocam selamlar bende moser 1400 den aldım. bıçağın yan taraflarında ve üst kısmında sakala benzeyen beyaz tüğ gibi birşey gördüm. ve makinenin yan taraflarında beyaz tozlar vardı. fonex e sorduğumda bıçakları fırça ile temizliyoruz dedi. siz böyle bir durumla karşılaştınız mı?

@feyziaydn

3 жыл бұрын

Merhaba ben de ürünü sıfır aldım aynı şey benim kutudan da çıktı bıçaklarda da vardı. Ayrıca kesici bıçak tam paralel değil gibi biraz eğri duruyor kesim de şimdilik sorun yok sizin makine nasıl ?

@mectal87hotmailcom

3 жыл бұрын

@@feyziaydn fonexten aldıysan 14 gün içinde iade hakkınız var. Başka yer geri almam diyor. Ben iade ettim. İzmir gıda çarşısı kozmatikciler den aldım. Setsiz olanı 1400 050 modeli 265 TL. Tertemiz çıktı içi barkot uygulaması indirdim. Kutuyu okuttum orijinal dedi. Fonex dışında bir yerden aldığında kargo sana ait oluyor 50 TL maliyet var. Tek sıkıntı bu.

what can be used as a substitute for the included oil if it's not available?

@WAHLClippersEurope

6 жыл бұрын

Well, you need to make sure that oil is always available. Even if you're stuck on a lonley island you should have this oil always with you: www.moser-profiline.de/en/produktfinder/_leaf/415

@ibrahimabolila8785

6 жыл бұрын

thanks, I mean are olive oil and other vegetable oils not efficient lubricants for the blades?

@WAHLClippersEurope

6 жыл бұрын

Nope! Never use olive oil etc. to lubricate your blades please. Just wait until you can use the recommended oil. :-)

@ibrahimabolila8785

6 жыл бұрын

I'll try although I can't get access to any similar oil here :,(

@WAHLClippersEurope

6 жыл бұрын

Where are you from mate?

i brought my moser one month back ... but the screws are very tight to open i feel still very difficult to open ..please suggest me how much width of screw driver to be used to open the scews .... i hope u will help me to sought out this problem

@amritagada1039

3 жыл бұрын

Same problem

Suuuper!!!

what is the button in the second side of the button of the power (on-of)???? what the uses of this button 🤔🤔🤔🤔

@kombinatsiya6000

4 жыл бұрын

that button keeps the long handle thingy in place and releases it when you push the button.

How often do you change blades?

@WAHLClippersEurope

2 жыл бұрын

whenever they are dull. Depends a lot on the type of usage. :-)

Tq

كم السعر

The inner smaller blade doesnt fit back onto that little plastic thing in the middle so when you put the big metal plate blade on top and screw it in, the smaller blade is still kind of loose and if you touch it with your fingers it moves... whats up with that

@Asiong09

2 ай бұрын

Yeah it does not cut anymore and makes a loud sound!

@furtherishere7568

2 ай бұрын

I had same problem ,did u find any solution

@furtherishere7568

2 ай бұрын

I have same problem, black blade moves easily, and when I on the trimmer ,it gives cracking sound ,why is that

@furtherishere7568

2 ай бұрын

When I on the trimmer, it gives cracking sound for 1 sec ,why is that, did u notice it

After i make this, the sound of my machine is a little bit different. Is this normal ?

@emmaaylone9580

5 жыл бұрын

u can change sound or speed by adjusting the screw on right side...

Bhai mozer ka oringal trimmer kharidna chahta hu, link de sakte ho..?? Plz..

@WAHLClippersEurope

6 жыл бұрын

Please contact WAHL India, they can help: wahlglobal.com/india/index.html

nice❤💝💞💓💗💖💘💕❣️💙💚💛🧡❤️

camel machine made in Germany

𝙎𝙬𝙞𝙩𝙘𝙝 𝙛𝙧𝙚𝙚 𝙝𝙤𝙤 𝙜𝙮𝙚 𝙝𝙖𝙞 𝙤𝙣 / 𝙤𝙛𝙛 𝙣𝙝𝙞 𝙝𝙤𝙩𝙖 𝙝𝙖𝙞 𝙪𝙨𝙠𝙖 𝙠𝙤𝙞 𝙫𝙞𝙙𝙚𝙤 𝙮𝙖 𝙪𝙥𝙖𝙮 𝙗𝙩𝙖𝙤𝙤

Very helpful, Thanks!