Blacksmithing & Woodworking - Huge Wood Mallet for Steel Wedges
Тәжірибелік нұсқаулар және стиль
I'm not a fan of hammering in steel wedges for splitting wood with a normal steel hammer, since it wears out the wedges faster and can even in some cases send a piece of steel flying right back at you if the steel wedge is very worn out.
So I decided to make a very large heavy wooden mallet for the sake of not wearing out my wedges and safety concerns.
Thanks for watching!
Social media:
/ make_ncreate
Email: makencreate@outlook.dk
This video is copyrighted and my property and cannot be used or redistributed or published without my given permission.
Пікірлер: 141
*THATS IT IM GETTIN ME MALLET*
@logantygum
2 жыл бұрын
Ohhhhhh now Heustus
16:05 "oh god what is he going to do with those chickens" 16:07 "Oh he's just feeding them lol"
@anthonydeacon881
3 жыл бұрын
Yes, that had me thinking, too! A bit overkill just to spatchcock a chicken! 😉
Here is a technique from an old wagon tire man. Save a piece of the wood you use for the mallet head. Slowly heat your metal rings over the forge to expand them. Keep touching the mallet wood to the metal, and stop heating when the heat from the hoop starts to brown the wood. Put the hoop on the mallet and drive home. The shrinkage from cooling will make the hoop even tighter. And there will be no charring to crumble away and loosen the ring.
That's it! I'm gettin' me mallet!
Wood: *exists* Make N' Create:im about to end this mans whole carrier
@dergurux7592
5 жыл бұрын
Coisas aleatórias apple: exists Mallet: im about to end this mans whole carrier.
@TheRealLifeRobert
5 жыл бұрын
Career*
@dergurux7592
5 жыл бұрын
GumShoe sorry
Like not looking !!! Well done as always! A hand-made thing always pleases its owner and serves him for many years !!!! Keep up the good work !!! Greetings from Russia!!!
@MakeNCreate
5 жыл бұрын
Thank you very much!
Moth: *exists* Make n' Create: *stops everything to admire and get to safety so it doesn't burn*
@SelfMadeMaeve
2 жыл бұрын
This needs to be pinned!
Don't know what it is, but I absolutely LOVE the handle making part of these videos.
@MakeNCreate
5 жыл бұрын
Haha thank you very much. I was actually thinking that people were getting tired of watching me using the drawknife.
@SilverBoltLuke
5 жыл бұрын
@@MakeNCreate no the drawknife parts are always the best
3:24 möth bruder i need the lämp
3:35 Moth has no right being that cute
10 extra points for not wasting the apple, Gallagher.
thank you for not charring it. I see so many people do i. It is not for everything. Your mallet looks amazing.
I love that you went out of your way to move that little bugger!
Very cute moth and cat!
Excelente herramienta!!! Un gran trabajo!
Splendid craftsmanship.
I love how you take care of the insects before starting the fire! Everytime I see you doing it, it feel so great! Great work for the mallet, as usual! You are very talented!
That seemed like a friendly moth. Cool paddle drill bit I've never seen one like that.
Amazing, as always
3:30 the moth: screw lamp i want F O R G E !
Saw it on ista loved the thought of it . I hope your house cleaning is going great . Love the vids and keep up the good work . You have inspired and taught me how to work with leather good trait to have thanks for everything
@MakeNCreate
5 жыл бұрын
Glad to inspire :) Working mostly on cleaning out the workshop these days. Going home to make videos again on sunday :)
That looked like a really fun project! I need one!!!
Beautiful.
The master has Golden hands
Excellent Mallet, thank you for sharing :) ATB
You are very talented man and I hope you keep up the good work.
Fantastic
The apple smash made the whole video! Awesome man
Nice build!
Great job friend , I gotta try this Thankyou for sharing
Sweet build, I could certainly find a use for one of those!
this is way to make charcoal *Turn on captions for written commentary (CC in bottom right corner of screen). Charcoal is a valuable fuel that reaches a higher temperature than the very wood it’s made from. I’ve made some before, but with supplies running low due to furnace experiments, I decided to make another large batch of charcoal in a mound. I stacked the wood into a roughly conical shape (about 1 m wide and 75 cm high) and then built a thick wall of mud around the heap (this took 6 hours). Eight air entries were made in the base of the mound and one air exit hole was left at the top of the mound to allow the volatile components of the wood to escape while creating a natural draft to keep everything burning. The mound was lit and the flame burned backwards down the heap in the opposite direction to the draft. This protects the coal made above the level of the fire from burning as carbon dioxide rushes past instead of oxygen, preventing combustion of charcoal. Each air entry was sealed only when fire became visible through them. This is an easy way to tell when to close them up, i.e. when the fire had burned down all of the wood in the heap. When the last air entry was closed, the air exit at the top of the mound was sealed, 5 hours after starting. The next day when cool, a large arched opening was made in the side of the mound to extract the charcoal. Despite a few unburnt brands the yield and quality was good filling almost 2 baskets. To see if the kiln was reusable, I restacked it with timber cut from a fallen gum tree branch up the mountain. Due to the difficulty in reaching into the mound I stacked the wood in criss-crossed horizontal layers. The opening was sealed with mud and the mound lit as before. This time the mound burned quickly and I had to seal it early as the timber was burning at different rates, 3 hours after starting. Some large logs remained unburnt while charcoal that had already formed started to burn up being wasted as ash. When I opened it the next day it had still produced an ok amount of charcoal but was disappointingly low compared to the first batch. This may partly be due to some of the wood being still green though it’s probably more likely to be due to how it was stacked. The lesson here is that when making charcoal the wood needs to be tightly stacked with few air spaces between. If not, the mound admits too much oxygen that quickly burns the timber. Another thought I had was that wood may convert to charcoal better if laid vertically (or roughly so, like the cone in the first firing) so that the fire starts at the top of the wood and burns down. Stacking the wood in horizontal layers means that each layer has to set the one bellow alight leading to problems if the wood is green (use dry wood if stacking horizontally). By stacking wood vertically each piece is alight already and simply burns down towards the air entries. Stacking in this way also makes it easier to see fire in the air entries letting you know when to seal the mound. For the reasons above I may make another charcoal kiln in future in the shape of a cylinder with air entries around the base and an open top. The kiln would be re-usable and easily stacked. A conical pile of wood would protrude above the walls of the kiln and be plastered in a temporary cover of mud. The kiln would be fired as with a normal mound and when finished the temporary cover of mud would be removed to extract the charcoal
That’s it! I’m makin’ a mallet!
Saw it on your insta page and couldnt wait for the video. Awesome
@MakeNCreate
5 жыл бұрын
Thank you!
The sounds of wood working at high speed is strangely soothing.
Great video thanks for the information
Wow just wow ❤❤❤❤❤❤
"For steel wedges" pfft, please, you and I both know it's to smash chicken feed
@colinperkins8794
5 жыл бұрын
Lol
*ALRIGHT LET ME GET ME MALLET*
Looks like a paladin's hammer from wow, amazing by the way!
@MakeNCreate
5 жыл бұрын
Yes it does! Playing Vanilla soon ;)
Hi 👋 good project, good job 👍
Bravo
Nice work...😉
Nice, but you forgot to soak the mallet ends in water then mushroom the edges back to hold the hoops on.
Way cool 😎
I think you got the idea from Jalager. When you was watching one of your parents channels on tv lol Looks great and great job making it!!!! Enjoyed your video and gave it a Thumbs Up
Nice bit of impromptu wildlife spot!
Cool
That is a cool mallet. Looks really strong
Now i know where all those level 1 human paladins get their weapons.
Awesome as always :) what does adding the metal bands do for the hammer?
@amyllari5274
5 жыл бұрын
keeps it from splitting
I sincerely think that using heartwood for the handle of your mallet may be better and more durable than sapwood. Anyway, that was a very nice video. Thank you for sharing. Greetings from France
@MakeNCreate
5 жыл бұрын
heartwood is not preferable for handles since it's more brittle and thus more likely to crack or break. Sapwood on the other hand is more flexible and will act more as a spring and absorb the impact instead of cracking. Thank you very much!
Those are some great welds though
Ah yes, Muscled Hammer Guy's new hammer.
Ghallager would be proud.
I've always called a one handed wooden hammer a mallet and a big two handed wooden hammer a maul - 'cause that's what it does to things! ;-)
Make N' Create: uses wooden mallet to make wooden mallet Me: what is this? Also me: that looks cool. Sort of dwarfish looking. (What is the correct version? Dwarfish? Dwarvish? Dwarven? ) Also, at 1:28 I thought the saw was actually going that fast, because it wasn't sped up, it was CUTS. (Get it? Like cuts in the video, but also because it's a saw? Hahaha, I'm so lame.) I wish I had a saw that was that fast though.
Superrr !!!
And kids... That's how the sledge-o-matic was made...
7:30 Lord Of The Rings !
Wow
syndes du er super god til at lave sådan noget
It looks like a round version of the giant square one the guy who runs The Old Hickory Forge. Did his video inspire you to make this one yourself? Because it made me want to make one when I saw his.
If you were to put the wedge slot and wedge itself perpendicular to the grain, that way it butts up right at the start of the grain inside the mallet eye. It won't want to wedge apart side to side, but forwards and back. This will reduce cracking very well.
That there is a Kirby-clobberin tool, don't try to fool us
That moth had no idea the fiery death it could have had
New hammer wood
I'm curious what it will look like after hitting a steel wedge a few hundred times. I have something similar but hitting the wedge off center bashed up the sides enough to cause issues.
Are you making replacement mallets for Gallagher? 😂😂😂
**hears Eustis from the distance**
make n' create is an animal friendly channel
Wait can I recommend a movie for you to watch? ( if so you will laugh your ass off ;) )
A brass mallet would also work right, since the brass can't wear out or break the steel, you also don't need a giant mallet if it is made of brass
Thought you were about to start clubbing chickens for a second lol
Thanks now im gonna use it on my annoying tia that acts as a lawyer to my little sister
What’s the ratio for handle size to head size? Is it like for a six inch head the handle has to be at least an inch and a half?
Отличная работа! ps бабочка!
This makes me wanna play paper Mario again
Hi, What kind of wood did you usted please?
I could really clobbah dat dere Kirby with that!
Wants one of these mallets! ...........................please.
What type of wood were you using?
The cat was like the moth made an appearance its my turn
What type of coal do you use for forge please ?
long video for just apple sauce...... good work
Great video. But the wedge in the handle realy should be across the grain of the head. I tink it is mainly because of your nice steel rings on the head why the head did not split when you hammered the wedge in.
@MakeNCreate
5 жыл бұрын
True, I did not think of this! Head wouldn't have split though: There may be a lot of cracks in it, but I have no feeling that it's gonna split.
Sehr gute Arbeit Warum hast Du die Ringe nicht heiss aufgezogen das geht leichter
If you boil the wood in water or steam just before putting the ring on, the wood will accept it better
15:45 i wish it be my head
@matthiasthulman4058
5 жыл бұрын
Why? Things not going well?
Fantastic...bon travail.. continuez Un fan marocain...contactez-moi Svp...
Apple Sauce Video ... : )
Bel realisation
What in the world is that tattoo on your arm lol
@jacobbenns6090
5 жыл бұрын
It looked like a ruler...
@thehipmyster
5 жыл бұрын
@@jacobbenns6090 I know...I was wondering why he has it
@MakeNCreate
5 жыл бұрын
It's a ruler to measure stuff in a pinch.
Я то думал, чо он делает.? А это тот самый яблобой!
What wood is that head????
have you ever gained any injuries while doing this?
@colinperkins8794
5 жыл бұрын
Slight injuries like sander paper or a wire brush
@MakeNCreate
5 жыл бұрын
Not often but the occasional burn or cut does happen every once in a while.
Why not forge weld the hoops ???
An Orc basher! Nice. 👍
15:53 an apple a day keeps the doctor away
You need to make a katana