Part two of this video is making the toggle arm assembly. Follow me on social media: / bccreationsrva amakersjour...
Жүктеу.....
Пікірлер: 36
@alladeendawood61735 жыл бұрын
Welcome good Beat I like it
@keithmartin78315 жыл бұрын
Would like to see parts list and plans when you getter done.
@Hermancoy5 жыл бұрын
Kren pak sangat bermanfaat
@creativecompulsion76812 жыл бұрын
Great videos man
@chrisclemons21792 жыл бұрын
very nice machine work
@abdulgafoorkota62934 жыл бұрын
Nice
@nationwideofficial72014 жыл бұрын
Thank you Brother God bless you
@sinaga244 жыл бұрын
Mantap bos
@duanehoover19795 жыл бұрын
I just watched your video looking good and i see you got a piece of 3" stock mine is cold rolled but yours is better metal from hydraulic cylinder it looks like your arms look like 1 1/2 x 1/2 should be strong enough I was thinking that the 3" round for hammer at app. 30 or 35 # would be heavy enough plus, your bearing and arms should be pushing about 40 # or so, thanks for the reply's im curious if you use your round for hammer how the attachment is going to be ,im thinking on that ,brass might make a good bushing with grease fittings thanks again have a nice week end Duey
@AMakersJourney
5 жыл бұрын
Duane Hoover I’m thinking about hardening and tampering all the arms not sure yet using grade 8 bolts. The bushing thing is a good idea I know a lot of people do it I also know some don’t. Still not sure what I’m gonna do about dies. I am thinking about just using the hammer and making different does for the Anvile. At this point it is starting to feel like an experiment
@johnjude26775 жыл бұрын
Will you be selling prints Is it below 8 ft. tall? Thanks
@aurelianorosa5904
5 жыл бұрын
Nunca foi adaptado pra riscar nada, parquímetros são instrumentos de medição de precisão, acho que quem pensa assim nunca deveria usar um.
@oniplays25363 жыл бұрын
what kind of drill bits do you buy
@chrisclemons21792 жыл бұрын
what is the stroke length of the rod
@suyononano35764 жыл бұрын
Thanks 👍
@AndrewBuchen4 жыл бұрын
You are speaking Chipmunk.
@captainthunderturd84425 жыл бұрын
Excellent vid but I would have forge welded it together 💪
@superbreastman
3 жыл бұрын
Can we see your video on how you would have done it?
@welderdude19905 жыл бұрын
Squeeky welding hood lol!
@AMakersJourney
5 жыл бұрын
I know I thought about putting a little oil on the knobs LOL
@nationwideofficial72014 жыл бұрын
I'm subscribe your chanal I feel it's good
@AMakersJourney
4 жыл бұрын
Rah Ahmed Mughal thank you
@user-ub9oo6ip3h5 жыл бұрын
جيد
@denmark27985 жыл бұрын
what kind of marker 00:45
@CUBETechie5 жыл бұрын
You use at first a MAG/ MIG machine and then stick welding? But Why?
@AMakersJourney
5 жыл бұрын
Just to demonstrate that you can do it in various ways
@CUBETechie
5 жыл бұрын
@@AMakersJourney oh okay . I make a curse for MAG welding and I want first gain self-confidence and experience and then go further. 🙂
@AMakersJourney
5 жыл бұрын
Practice truly makes perfect. I’m not real good at tig welding so I practice all the time. Good luck
@CUBETechie
5 жыл бұрын
@@AMakersJourney thank you. Actually I make fillet welds if I understood correctly in the USA it's called 2F
Пікірлер: 36
Welcome good Beat I like it
Would like to see parts list and plans when you getter done.
Kren pak sangat bermanfaat
Great videos man
very nice machine work
Nice
Thank you Brother God bless you
Mantap bos
I just watched your video looking good and i see you got a piece of 3" stock mine is cold rolled but yours is better metal from hydraulic cylinder it looks like your arms look like 1 1/2 x 1/2 should be strong enough I was thinking that the 3" round for hammer at app. 30 or 35 # would be heavy enough plus, your bearing and arms should be pushing about 40 # or so, thanks for the reply's im curious if you use your round for hammer how the attachment is going to be ,im thinking on that ,brass might make a good bushing with grease fittings thanks again have a nice week end Duey
@AMakersJourney
5 жыл бұрын
Duane Hoover I’m thinking about hardening and tampering all the arms not sure yet using grade 8 bolts. The bushing thing is a good idea I know a lot of people do it I also know some don’t. Still not sure what I’m gonna do about dies. I am thinking about just using the hammer and making different does for the Anvile. At this point it is starting to feel like an experiment
Will you be selling prints Is it below 8 ft. tall? Thanks
@aurelianorosa5904
5 жыл бұрын
Nunca foi adaptado pra riscar nada, parquímetros são instrumentos de medição de precisão, acho que quem pensa assim nunca deveria usar um.
what kind of drill bits do you buy
what is the stroke length of the rod
Thanks 👍
You are speaking Chipmunk.
Excellent vid but I would have forge welded it together 💪
@superbreastman
3 жыл бұрын
Can we see your video on how you would have done it?
Squeeky welding hood lol!
@AMakersJourney
5 жыл бұрын
I know I thought about putting a little oil on the knobs LOL
I'm subscribe your chanal I feel it's good
@AMakersJourney
4 жыл бұрын
Rah Ahmed Mughal thank you
جيد
what kind of marker 00:45
You use at first a MAG/ MIG machine and then stick welding? But Why?
@AMakersJourney
5 жыл бұрын
Just to demonstrate that you can do it in various ways
@CUBETechie
5 жыл бұрын
@@AMakersJourney oh okay . I make a curse for MAG welding and I want first gain self-confidence and experience and then go further. 🙂
@AMakersJourney
5 жыл бұрын
Practice truly makes perfect. I’m not real good at tig welding so I practice all the time. Good luck
@CUBETechie
5 жыл бұрын
@@AMakersJourney thank you. Actually I make fillet welds if I understood correctly in the USA it's called 2F
I found you
😂😂😂
بد فرم
PAQUIMETRO NÃO É RISCADOR SEU CAVALO
@franciscodeassisvarelabarc6428
5 жыл бұрын
São adaptados para riscar..Eles usam muito.