You're not really showing how to paint, but you are showing you're very talented. Great job!

@jasonreilich8398

2 жыл бұрын

Yes he is showing you how to paint these are the must required steps in between paint schemes also after doing each layer paint you will also go back in with an exacto blade and cut out more and then change those colors Etc and excetera until your desired look task is achieved👍 you must have a lot of patience because it is tedious but also very rewarding when you are done

@toysforboysrc

Жыл бұрын

Too much focus and are attention to detail for me to explain while also doing body & pain paint work when the job pays more than the video. So I’m guessing other ppl might feel the same way.

Great work guys.. Bitty Liquid Mask is by far the best!

Thank you for sharing this. 👍🏽. Very talented and creative.

Absolutely incredible!! Truly amazing work. I can tell you have tons of hours of experience. You are a Master of your craft! Thank you so much for sharing. Keep up the amazing work.

Excellent job!! looks absolutely amazing!

A talent I wish I had. Looks fun!

Wie immer eine krasse Arbeit!

Why does this only have 120 comments? Fantastic work friend. After trying a couple different products, I finally ran across this brand of liquid mask. So far been practicing on random scrap bits of lexan, and any clear/flat plastic I find. This product was a life changer for me. Thank you.

@Bittydesign

Жыл бұрын

Liquid Mask is a game changer, much easier, much faster, much precision, all the way!

WOW! that was amazing. I like the liquid tape sprayed under the body. If thats the way it comes off all in one piece when removed thats too cool. I have never had such luck. I'll have to buy at least two bodys one to beat on the other to show. GREAT job

@ryurc3033

Жыл бұрын

Liquid mask works better the thicker you put it on.

Amazing work

I just registered at your website and will be making an order within the next 60 days. Looks like high quality merchandise.

Creamy! This job is outta control! Great work

Damn nice work. Had to sub.👍💯

This really helped. Getting the design drawn on the body is the most difficult task for me at this point. Can you link the 1.4mm Spray Gun? I have a 0.5mm that looks exactly like it. Incredible paint work, BTW!!!

wow I respect your craft

Nice，good work！I ❤it！！！

What white do you back it with? And how do you cut the curves so easy! I struggle with small curves

Just ordered one of your air brushes

Great Work There

@stefanorabitti8898

3 жыл бұрын

About 6 Hours "start to finish"

very nice work... what paint did you for the Backed White??

Doesn’t look like you think your paint stefano, what size needle in your airbrush? I assume quite large? Or small with lots of pressure??

Amazing

Nice job! But... the most important thing....show us the picture after the skin protection film off ㅠ

great work ...love it..you don't have the stencils available do you? not really a great drawer

@Bittydesign

4 жыл бұрын

Soon the stencils will be available on our website, follow us on FB/Instagram to not miss our releases ;-)

Good job m8 that´s surdenly not the first body you ever made, but its a shame we dident get to see it with the protective outer film off, i know that the black lines that cross out on the painting is on the outer film and goes away once the film is removed but it made the end result, we got to see, look like it was done by an amature.

Great work! I just don't have the patience.

Lamentablemente yo no tengo compresor Cuantas capas le das de mask liquid

What marker do you use?

Great video! Do I need a spray gun for the Liquid Mask, or can I get away with using the #5 needle on my Paasche VL? I can get a reasonably priced 1.4mm gun, but I will probably need a better compressor than the 3 gallon I have. I also don’t think that reducing the LM would be a good idea.

@Bittydesign

4 жыл бұрын

To spray a 1,4mm nozzle spray gun it's okay, use about 50psi and apply 3 coats.

@thefriendlyteenager726

3 жыл бұрын

@@Bittydesign is it okay to use liquid mask from other companies?

@Bittydesign

3 жыл бұрын

@@thefriendlyteenager726 you can use the LM that you want sure, but there's nothing who perform so good like our own LM ;-)

@thefriendlyteenager726

3 жыл бұрын

@@Bittydesignthanks, I just picked up a bottle of your liquid masking the other day even though I am an amateur at body painting I was impressed

How long did it take you to do ?

SUPER taf chapeau waaauuuuoooooo

Nice work! Do you paint for hire? I could really use some help.

It never dries and always peels when I try to cut it. I cant believe you get suck good results im ready to try Elmer's glue

Do you use clear coat?

I just ordered BD Liquid Mask and I'm starting with airbrush... I only have a 0.4 needle for now, so I suppose I won't be able to spray the Liquid Mask with that. I've seen somewhere it can also be applicated with a sponge, is that right? Could you please confirm that once the mask is dry, you cut everything that need to be cut at once, then peel the parts only when needed? I'm worried If I cut too soon, the paint can fill the gaps...

@Bittydesign

4 жыл бұрын

Exactly, cut everything that need to be cut at once then peel the parts only when needed. LM can be applied with a spray gun (1,5 nozzle and 3.5 bar pressure) or with a soft brush, 3 layers.

@TheRoadTaken

2 жыл бұрын

@@Bittydesign Thank you for replying to Jonathan. I had literally the exact same question.

✌🏻😎🏴󠁧󠁢󠁷󠁬󠁳󠁿This video is awesome. Your inspiring me and motivating me to use something I have never used before. Look Amazing. I have a bunch of questions about Liquid mask if you don’t mind. I would like to use an airbrush to spray the liquid mask but the only airbrush’s I have are gravity & siphon feed for airbrush painting. I don’t have a gun like the one in the video. I would like to use my siphon feed airbrush. Q1. What size needle & nozzle do I need in the an airbrush to spray liquid mask ? Q2. Can the liquid mask be thinned out/down to go through a small airbrush needle & nozzle ? Q3. What do I use to make your liquid mask thinner? Q4. What is the shelf life of an open container of liquid mask? Q5. What is the shelf life of a factory sealed container of liquid mask? Q6. What amount of air pressure should I use? Q7. How long can the liquid mask be left on the body before you need to peal it off? Q8. Does it react badly with certain types of paint? I have Proline Airbrush paint, clears & reducer etc. Q9. Please could you do more content on liquid mask & painting because this is awesome? I’m new to drawing, painting, airbrush etc. I have an airbrush & compressor kit I have never used and all of the paint sets from proline which I have also never used. Up until now I haven’t been motivated to do anything & I have been ill for a very long time. Now I really really want to do something with it all. Hopefully with your help and guidance I can keep this up. & hopefully you will create more content 👍🏻

@Bittydesign

4 жыл бұрын

Q1. From 1.5 to 1.7mm nozzle is what we recommend. Q2. Our LM is ready to use, we never thinned it before. Q3. Even if we never thinned it you can do it with water. Q4. Without any problem a open bottle can be used after 6 months (or more). Q5. Long life, after 1 year the LM maintain the same specs as a new bottle. Q6. Recommend 3.5 bar pressore (500psi) Q7. There is not a specific time, the moment to peel off the mask is when it change color because the water dry and the mask become semi-transparent; before remove the mask you need to cut with an hobby knife all the lines of the graphic that you’ve drawned. Q8. I have Proline Airbrush paint, clears & reducer etc. The LM is not compatible only with spray cans, the special formulation has been developed for the use with all the water based (acrylic) paints on the market. Enjoy the use of our Liquid Mask!

Bittydesign what brand/model is the airbrush that you were using that had the paint bottles attached to it?

@Bittydesign

3 жыл бұрын

It's our own airbrush, soon will be released to public, follow us on FB and Insta and don't miss the new releases.

wow faskolor this is old school paint!!! they went out of business ages ago no?

Hello, what airbrush use with the Faskolor paint and what tip? Thank you!

@Bittydesign

5 жыл бұрын

Something very BIG about "airbrush" is coming soon, stay tuned, July will be a very interesting month for all the painters ;)

@jidai7506

4 жыл бұрын

@@Bittydesign new airbrush?

@diegoolivera6468

4 жыл бұрын

@@jidai7506 It has been over 7 Months nothing came out?

@rags2richs893

3 жыл бұрын

Any updates on what air brush and tips he’s using

Nice done, love your work

What air brush are you using or would recommend? Thank you

@Bittydesign

3 жыл бұрын

We recommend to follow our social channels (FB and IG) because we will release in April our painting equipment line up ;)

"Use drop shadows technique" -- got a video for that too?

Where do you get that mask for the headlights and grill Or what is it called Looking everywhere for that stuff

@Bittydesign

4 жыл бұрын

No mask, they are handmade body per body, we use our Liquid Mask to cut at the perfection the details of the lights.

@kotkln

4 жыл бұрын

@@Bittydesign you make the perforated "tape" you used on the grill. like cut vinyl or is it something that is available

@stefanorabitti8898

3 жыл бұрын

Hey guys, I'm the painter of the video. Is a one-way vinyl. Available also on Amazon.

That is clownin good job

Fantastic work with amazing result, now this is why I paint my bodies white with a tamiya PC rattle can.

@stefanorabitti8898

3 жыл бұрын

LOL

can i have that bodyshell pretty please

Where can I get or download the design? Was hoping this video showed the design more as I have seen this design done by a few people but can’t find it to download and try.

@Bittydesign

7 ай бұрын

You won't find the template online, you can only try to replicate the MR livery simply by using the thousand pics available on Google (option 1) or, alternative, order a replica to us (option 2) like the customer of this video.

@saadlebdeh89

7 ай бұрын

@@Bittydesign Yeah I’ve looked lol and no I can’t find it anywhere. As I’m in Australia I would think shipping a body from your base in Italy would be rather expensive. I love your products by the way. I just purchased the Eptron body and I use your masks and stencils. You guys design very stylish and fast bodies. I’ll go to your site though and get a quote for a body as you have me intrigued now lol. Thanks

It must be hard to let those bodies go after all that work. It’s like keeping the body feels better than the money from a sale. Are you cutting the film with a metal razor or a ceramic/graphite razor?

@Bittydesign

Жыл бұрын

Check out our website, item code #BDHK-11323 called "Hobby Art Knife", this is the tool we use to cut the Liquid Mask, we also sell the spare blades.

@toysforboysrc

Жыл бұрын

@@Bittydesign …. Thank you I’ll do that💪

What is that for a song?

can i spray this liquid mask also with a normal small airbrush gun or do i need such a big one because of thickness ?

@Bittydesign

Жыл бұрын

You need a spray gun with 1.4 / 1.7 nozzle and use about 3,5bar air pressure.

@morytox

Жыл бұрын

@@Bittydesign is an Normal Airbrushcompresser such as AS186 sufficiant for such a gun, or do i need a whole other compressor setup to spray liquid mask? (I guess it gets difficult in the cfm department right?)

@Bittydesign

Жыл бұрын

@@morytox Airbrushcompresser AS186 is too small, you need 25L normal air compressor

Woulda been great to see it without the protective film over it with all the mockup marks on it

Is all the detail in the headlights done with masking?

@stefanorabitti8898

3 жыл бұрын

Yes. Everything done by freehand

@allroadaustin617

2 жыл бұрын

@@stefanorabitti8898 I wanted to ask when you say cut in one time what do you mean? Cut all the design at the same time? Or cut every line and never lift the blade off the body? Some help would be great! Freak work!

@stefanorabitti8898

2 жыл бұрын

@@allroadaustin617 first one. Cut all the design at the beginning. Not only the first area to be painted.

Excuse me!Where can I buy 3:45 mesh sticker?

@Bittydesign

5 жыл бұрын

Soon at Bittydesign.net! ;-)

hi I wanted to know where I can find the micro honeycomb masking to airbrush the front radiator grille!! thank you.

@stefanorabitti8898

3 жыл бұрын

On Amazon. Search for "one way vinyl"

@nicolaranieri4125

3 жыл бұрын

@@stefanorabitti8898 Ciao o intrapreso la passione per l'aerografo per farmi le carrozzerie da me, volevo alcune dritte(se possibile!) le mascherature della BITTY perché non un minimo di adesivita, poi con che pressione si usa la mascheratura liquida di BITTY e i colori normali! Ma più importante dove posso trovare l'effetto griglia.Ti ringrazio anticipatamente perché sicuro di un tuo consiglio

@stefanorabitti8898

3 жыл бұрын

@@nicolaranieri4125 ciao! Ti Consiglio sempre di scrivermi su Facebook o su Instagram. Se per consigli di verniciatura anche ai miei profili personali. Non le abbiamo fatte leggermente adesivi perché altrimenti non sarebbero Stati riutilizzabili. Così facendo ti sporche Rai un pò le dita ma puoi usarli tante volte. Per la Liquid mask hai guardato la pagina prodotto sul nostro sito? Trovi tutte le info li. TUTTE. per i colori da Aero grafo io uso una pressione di 3.5 bar. Quindi piuttosto alta ler sopperire alla densità dei colori all'acqua. Li uso così fuori dal barattolo senza diluizioni strane.

@stefanorabitti8898

3 жыл бұрын

@@nicolaranieri4125 per la griglia ti ho risposto nel commento precedente. Vai su Google e scrivi quello che ti ho scritto.

@nicolaranieri4125

3 жыл бұрын

@@stefanorabitti8898 Mi piacerebbe conversare con te, non immagini che sforzo sto facendo a scrivere dato che con i miei 54 anni senza occhiali, spero di non scrivere cazz...per scelta ho solo WHATSAPP come social. Tornando all'effetto griglia, devo trovare "One way vinyl!!"

Can I order a custom painted body from you? I don’t have hands that are even close to steady enough to do something like that

@Bittydesign

Жыл бұрын

Alan of course, drop us a line (see email address on our website) and we will pleased to paint a body shell for you

Is the spray gun for the LM HVLP?

@Bittydesign

2 жыл бұрын

Yes correct, HVLP spray gun from 1.4mm to 1.7mm nozzle

What airbrush are you using

@Bittydesign

4 жыл бұрын

This airbrush will be on sale on our new website (in May), continue to follow us on our channels so you don't miss the day that our painting equipment will be launched! 😉

can i buy one already done?

@Bittydesign

4 жыл бұрын

Justin if you mean a "Rheinard Replica" already done this in not possible, we paint these extreme bodies only based on customer order; if you mean more in general a "painted body already done" yes in this case we have in stock some bodies, contact us by email (see our address on website), thank you.

How can i get liquid mask?

@Bittydesign

4 жыл бұрын

🛒Directly from our store at bittydesign.net/en/liquidmask

To ruggedize your RC Body, use "Truck Bed Liner" in a spray can for the final undercoat(s)... It should greatly extend the life of the paint, help to prevent cracks, is nitro safe, and is lightweight for the amount of durability and strength it adds.

wow

bonsoir quel serai vos prix pour peintre un camion tamiya en laxen

@Bittydesign

4 жыл бұрын

Hello, we paint only our own IRON truck body, see our website for details ;)

Price for a painted body

@Bittydesign

4 жыл бұрын

Drop a line to our email (see the "Contact Us" page on our website) to get a free quotation for a painted body.

Come pulisci l'aerografo tra un colore e l'altro?

@Bittydesign

3 ай бұрын

Con semplice acqua tiepida essendo i colori acrilici.

How much for you to do this for me?

@Bittydesign

4 жыл бұрын

Drop us a line to info@bittydesign.net to get a free quotation! 😉

This is way beyond my skill level with an airbrush.... but damn it looks good

@rcstumpjumpers2049

2 жыл бұрын

this is way beyond everyone's level but fun to watch.

where do you get that mask for the grill?

@stefanorabitti8898

3 жыл бұрын

On Amazon. Search for "one way vinyl"

Take my money

Not pulling the film at the end was a tease

Me: crashes in first corner

Don't make it look so easy... probably 2 hours into that paint. But looks awesome..

Its like a surgery 🤯😂👍

Most top racers at our club race a pink car 🤣

COOL CONCEPT BUT SERIOUSLY CRAPPY PAINT JOB