For anyone wondering the sampling ratios on display here - Bin1 - 0.28 Bin2 - 0.56 Bin3 - 0.84 Bin4 - 1.12
@johnadastra1754
Ай бұрын
Sounds like the 1-2 arc-sec/pixel sweet spot needs to be re-examined.
@ChristianProulxАй бұрын
There are several hours of work in your video presentation Luke, bravo. Continue your excellent work.
@lukomatico
Ай бұрын
Thank you for that recognition my friend! :-) There's always a lot of behind the scenes work to get a video ready, the recording part that we end up seeing is almost always the shortest part of the whole process, haha! Thank you for your support and clear skies!!
@adrianphotovisions2308Ай бұрын
In the now old days with CCD camera's, binning genuinely helped S/N as binning reduced the readout noise of 4 pixels to a single readout noise of the 1 superpixel. But with CMOS camera's that is not the case and all that happens is a software bin, averaging adjacent pixels and reducing image size, so there is no benefit. I would always recommend imaging at bin 1 and if you feel the image looks a little oversampled, then bin/reduce image size in your chosen software to suit. Nothing is lost.
@IslandSkyPhotosАй бұрын
I was planning on googling binning when this popped up on my homepage! Talk about perfect timing!! Super helpful and answered all of my questions. Thank you so much!!
@lukomatico
29 күн бұрын
You're so welcome!
@deep_space_daveАй бұрын
Perfect explanation Luke! And great example of how it is always better to be over sampled than under even if you have to drizzle to get yourself oversampled. Thanks and clear skies mate!
@lukomatico
Ай бұрын
Thanks ever so much Dave mate!!
@steevebody449Ай бұрын
Nice work explaining this. One thing you are not mentioning which I see no one talk about is the fact that increasing the binning to a higher value increase SNR at the expense of resolution which can be a very powerful tool in processing. For example In processing you can leverage that to mitigate noise in really faint part of an object that often does not have a lot of structure in these regions. bin an image at bin 4, stretch it ( you can stretch it further because of higher snr), resample the image to bin 1 value using interpolation and then blend all the super faint stuff back into the main image at bin 1… you are essentially using variable resolution workflow which dynamically lower resolution and increase SNR where details is not there but noise is.
@AlexN-AstroАй бұрын
Finally a video on this topic. I'm well undersampled at 3" per pixel, but drizzling 2x helps a lot!
@lukomatico
Ай бұрын
Awesome to hear you've been waiting for a vid like this mate! :-D hope it was enjoyable!
@alfredobeltran611Ай бұрын
Excelent work Luke. In the end, it depends how much resolution can you get from your sky with your gear.
@msaccoАй бұрын
Very informative and interesting. Love all the comparison videos you're doing, there are a lot of misconceptions in this hobby by people that recommend stuff because it works for them, or that's what someone told them to do, but in many cases it could be good or bad. It's nice that we get to test some of these things with actual data. Thank you.
@lukomatico
Ай бұрын
Agreed mate! - nothing beats an actual test for me, they're a lot of fun too :-) Clear skies!
@SimonsAstroАй бұрын
Just what I needed to wake me up this morning Luke 😀! Got my brain thinking! Very well explained and demonstrated! Great vid mate, we need more of these to help us understand the technical side of this crazy hobby 🤣 Clear skies!
@lukomatico
Ай бұрын
Thank you so much for your kind message Simon!! :-D I really appreciate it mate!
@gabewrsewellАй бұрын
thanks for putting examples behind the numbers luke! hardware binning did have a purpose with CCD sensors, when electrons were added up per row it actually did do more than just downsampling in terms of noise. but with CMOS sensors, there’s no difference between binning while shooting and just downscaling your image afterwards, unless you’re worried about storage space or something. and as you’ve shown, even when very “oversampled”, there’s still plenty of gains to be had by using everything your sensor is capable of!
@lukomatico
Ай бұрын
Thank you Gabe!! I'm glad you found this enjoyable mate, it certainly seems like oversampling in the traditional sense is not something to be worried about so much anymore! :-)
@jjjscharf8059Ай бұрын
Thanks for this Luke. Really well explained and helped my understanding tremendously. Very much appreciate your contributions to the broader community. :)
@lukomatico
Ай бұрын
Thanks ever so much mate!! :-) Clear skies to you!
@aaronwilliams3949Ай бұрын
Great work! I enjoyed the livestream you did while preparing for this video. It’s nice to hang out while imaging or when the weather is bad. Either way is a win!
@lukomatico
Ай бұрын
Thanks mate!! It was nice to share the stream with people :-D Thanks for watching!!
@211milkmanАй бұрын
Very interesting results Luke. I can definitely see the individual results from the different levels of binning. I've always wondered what would happen if I did any binning on my images. Might have to give it a try and see. Great video my friend! Clear skies!!!!
@lukomatico
Ай бұрын
Thank you mate!! I definitely feel it's always worth a try on your own system for this kind of thing! :-) Hope you have a lovely weekend my friend!! All the best, Luke
@hymanmjАй бұрын
A superb video Luke and a proper simple explanation of this topic. Great! :)
@lukomatico
Ай бұрын
Thanks mate!! :-D glad you liked it!
@OldGirlPhotographyАй бұрын
Your comparison videos have so very much helped me make good imaging settings decisions. Have also helped me understand the different concepts to begin with. Thank you, Luke.
@lukomatico
Ай бұрын
Thanks so much for watching!! :-D
@SarahMathsAstroАй бұрын
The great people of the internet needed this video. Thank you for such a wonderful video and explanation!! You rock :D
@lukomatico
Ай бұрын
Haha! :-D Thanks ever so much Sarah!! Really glad you enjoyed it!
@vishadowАй бұрын
This was great information and the demonstration was perfect. I’ve never done binning because I simply thought that I would lose resolution. However, I am inclined to experiment with this using my ASI533 on the C8. Thank you
@lukomatico
Ай бұрын
Thank you so much for watching mate! glad it was useful :-) Clear skies!
@paulholdsworth2502Ай бұрын
Really interesting video Luke and as always well explained. For me I think of all the advancements in software the biggest game changer has been blur xterminator. Why anyone would spend the money we do on equipment and not invest a relatively small amount on software like pixinsight and blur xterminator I've no idea. 👍
@lukomatico
Ай бұрын
Agreed mate, bxt is absolutely the best money I've spent so far in astro! :-) Clear skies to you!
@CuivTheLazyGeekАй бұрын
That was a lot of work Luke, well done! And fascinating as well!
@lukomatico
Ай бұрын
Thank you mate!! :-D
@noddyoniceАй бұрын
Great explanation Luke! I’ve watched a few vids on this over the years and it’s been as clear as mud to me! Finally fully get it. Cheers! 👍🏻Noddy
@lukomatico
Ай бұрын
Excellent to hear it mate!! Thank you for watching and sharing! :-D
@w8byaАй бұрын
I remember decades ago when the only cameras around were from SBIG and cookbook cameras (for those on a budget) binning was used to gain sensitivity and increase well depth because you were increasing the capture area of the cell. Typically the L channel was bin-1 for max resolution but R, G, & B were binned 2 to pickup sensitivity with a slight loss in resolution (but that did not matter since it was just color info). Have these benefits gone away with our modern CMOS imagers?
@lukomatico
Ай бұрын
Great question mate!! - with CCD sensors binning should be more efficient as they only have one injection of read noise per given read area, CMOS need to read out each individual pixel before binning can occur, leading to as many samples of read noise as there are pixels being read - but the good news is CMOS has such a low read noise in the first place, and the read noise is calculated within a square root, that it equals out in the end and CMOS binning ends up being just as efficient as CCD binning in practice 👍 Hope that helps!
@w8bya
Ай бұрын
@@lukomatico Awesome to hear. Heck might be an idea for a future video....one that shows possible sensitivity advantages of binning (wink-wink).
@Tony-ElliottАй бұрын
Hi luke great explanation and very easy to follow thanks Luke for taking the time to make these videos
@lukomatico
Ай бұрын
Thanks so much for taking the time to watch and comment Tony!! It's very much appreciated my friend :-)
@LasserubinskovАй бұрын
Very very interesting. Especially the part about BlurX and Bin1 vs Bin2. I normally go for Bin2 with my ASI 294MM PRO and EdgeHD 9.25 because of over-sampling but I'll absolutely experiment with Bin1 now. Thanks!
@lukomatico
Ай бұрын
Cheers mate!! - I think it's well worth an experiment with deliberate oversampling!! :-) Clear skies!
@gregerianne3880Ай бұрын
Great video, Luke! Your graphs were perfect - not crappy at all, but very illustrative. Thanks for the great explanations.
@lukomatico
Ай бұрын
I appreciate that Greg! - Thanks so much :-)
@thebst6408Ай бұрын
like 227 👍🏻
@lukomatico
Ай бұрын
Thank you! Cheers mate!!
@petesastrophotographyАй бұрын
Excellent presentation Luke. I've been thinking about this quite a lot recently for my RC which has a long focal length as well. I think in my case binning 2x2 would be the best compromise (especially on a full frame sensor) to take advantage of the 2x increase in SNR. Whether or not to drizzle as well would be an interesting experiment as drizzling reduces SNR and may well cancel out the benefits of binning.
@lukomatico
Ай бұрын
Thanks ever so much Pete mate!! - I think you're spot on really, bin2 and using APP to drizzle a small amount (1.2/1.3x) would be a really nice compromise at this focal length, and should help make storage and stacking of those massive full-frame files a little easier!! :-D Clear skies mate!
@scottrk4930Ай бұрын
Fantastic info , well presented . Thanks Luke !
@PRASTROАй бұрын
Excellent explanation nice job mate 💪🏼💪🏼💪🏼
@lukomatico
Ай бұрын
Thank you mate!! :-D
@robertw187120 күн бұрын
Thanks Luke.
@seanod42Ай бұрын
Hi Luke great video mate
@lukomatico
Ай бұрын
Glad you enjoyed it mate!! 👍👍
@AstroReyakАй бұрын
Very interesting, but my self, see more detail on my screen on bining 1*1 In my case, my C8 with my camera is recommended for binning 2*2 haven't tried yet, but will do same experiment once M42 comes back for winter.
@lukomatico
Ай бұрын
Thanks for sharing mate!!
@AmatureAstronomerАй бұрын
Interesting.
@lukomatico
Ай бұрын
Thanks so much mate!! :-D
@dmccallieАй бұрын
Shouldn’t you also take into account the seeing? If the seeing is poor, the oversampled image isn’t really capturing the detail that it feels like? And of course some of the post-imaging “sharpness” from drizzle and/or deconvolution is sort of artifactual, using math to guess what the missing values are. But it did seem like your sharpened images on bin=1 were “better” than what you got from bin=2, even though I suspect your pixel scales were far lower than your seeing? Very interesting!
@sochin33Ай бұрын
Great analysis Luke, thanks. Apologies if I missed it, but how would you rate the seeing during the capturing of this data?
@lukomatico
Ай бұрын
Thanks mate! - it was very much just an average night! :-) Clear skies!
@josephluciani5531Ай бұрын
Thank you for the wonderful comparisons Luke. Much appreciated. I’m reluctant to show my ignorance, but what exactly is “over/under” sampling? Seems like it should be self evident, but I still feel I’m missing something in the definitions.😊
@lukomatico
Ай бұрын
Thank you very much indeed Joe!! - RE: under/oversampling, undersampling I suppose could be defined by if point sources are looking pixelated when viewed at your usual viewing size, oversampling is perhaps a bit woolier to define without knowing more about someone's setup and seeing conditions! Cheers! :-D
@Ben_StewartАй бұрын
Dithering just seems like pixel shifting.
@S70IPАй бұрын
Interesting Video Luke, thanks. I’ve often heard that one can Capture the RGB data binned 2x2 and LUM at 1x1 for the detail. Is this still a relevant and appropriate technique? 🧐
@lukomatico
29 күн бұрын
It's certainly possible, but you may as well capture 1x1 in most cases then simply resample afterwards 👍 (unless the storage/stacking speed benefits make bin2 RGB just too appealing!)
@davidrousseau806628 күн бұрын
Hi Luke, I switch from OSC to mono recently so my question will certainly sound "basic" (if not dumb...). When you shoot in bin 1x1, what scale setting do you use in PI for drizzling in your post-calibration. Is it "2" as most people suggest? Thank you!
@lukomatico
26 күн бұрын
Hey David! :-) A good question I think! - I actually don't use PI for drizzle, but AstroPixelProcessor instead, where you could use a droplet of 0.5 and scale of 2 to achieve a 2x drizzle effect, - hope that helps!
@tichwykesАй бұрын
Very interesting & well explained mate I'm guessing you're shooting this target using a mono camera? I only ask as it makes me wonder why colour cameras have bin options as when you use any of then except bin 1 they shoot mono.
@lukomatico
Ай бұрын
Hey Tich mate!! Aye this was taken with a mono cam, osc binning is an interesting subject all of itself for sure! Clear skies bud! :-D
@JeffFishmanАй бұрын
Ok Luke - question for ya…. With 115mm with .8 reducer in bortle7 What Bin and Drizzle level will help my images best? Using PI, BXT, etc..?
@lukomatico
Ай бұрын
I'd say go it depends a bit on your scope and how much detail it can resolve, worth giving a go at bin1 for sure, dependant on target try drizzle too if you're going for max resolution! :-)
@TheMacastronomerАй бұрын
What happens if you have the situation of oversampled data, choose to bin to gain speed and signal:noise… then take the image that is essentially 1/4 the size and go Image 200% (splitting that binned 2x2 pixel back into 4 pixels), then run deconvolution and finish processing?
@RobsDIYАй бұрын
how did you get on with the backyard universe upgrade?
@lukomatico
Ай бұрын
Good bit of kit mate really, haven't had the newt out a great deal to be honest but last o checked it's held collimation and is ready to go 👍
Пікірлер: 81
For anyone wondering the sampling ratios on display here - Bin1 - 0.28 Bin2 - 0.56 Bin3 - 0.84 Bin4 - 1.12
@johnadastra1754
Ай бұрын
Sounds like the 1-2 arc-sec/pixel sweet spot needs to be re-examined.
There are several hours of work in your video presentation Luke, bravo. Continue your excellent work.
@lukomatico
Ай бұрын
Thank you for that recognition my friend! :-) There's always a lot of behind the scenes work to get a video ready, the recording part that we end up seeing is almost always the shortest part of the whole process, haha! Thank you for your support and clear skies!!
In the now old days with CCD camera's, binning genuinely helped S/N as binning reduced the readout noise of 4 pixels to a single readout noise of the 1 superpixel. But with CMOS camera's that is not the case and all that happens is a software bin, averaging adjacent pixels and reducing image size, so there is no benefit. I would always recommend imaging at bin 1 and if you feel the image looks a little oversampled, then bin/reduce image size in your chosen software to suit. Nothing is lost.
I was planning on googling binning when this popped up on my homepage! Talk about perfect timing!! Super helpful and answered all of my questions. Thank you so much!!
@lukomatico
29 күн бұрын
You're so welcome!
Perfect explanation Luke! And great example of how it is always better to be over sampled than under even if you have to drizzle to get yourself oversampled. Thanks and clear skies mate!
@lukomatico
Ай бұрын
Thanks ever so much Dave mate!!
Nice work explaining this. One thing you are not mentioning which I see no one talk about is the fact that increasing the binning to a higher value increase SNR at the expense of resolution which can be a very powerful tool in processing. For example In processing you can leverage that to mitigate noise in really faint part of an object that often does not have a lot of structure in these regions. bin an image at bin 4, stretch it ( you can stretch it further because of higher snr), resample the image to bin 1 value using interpolation and then blend all the super faint stuff back into the main image at bin 1… you are essentially using variable resolution workflow which dynamically lower resolution and increase SNR where details is not there but noise is.
Finally a video on this topic. I'm well undersampled at 3" per pixel, but drizzling 2x helps a lot!
@lukomatico
Ай бұрын
Awesome to hear you've been waiting for a vid like this mate! :-D hope it was enjoyable!
Excelent work Luke. In the end, it depends how much resolution can you get from your sky with your gear.
Very informative and interesting. Love all the comparison videos you're doing, there are a lot of misconceptions in this hobby by people that recommend stuff because it works for them, or that's what someone told them to do, but in many cases it could be good or bad. It's nice that we get to test some of these things with actual data. Thank you.
@lukomatico
Ай бұрын
Agreed mate! - nothing beats an actual test for me, they're a lot of fun too :-) Clear skies!
Just what I needed to wake me up this morning Luke 😀! Got my brain thinking! Very well explained and demonstrated! Great vid mate, we need more of these to help us understand the technical side of this crazy hobby 🤣 Clear skies!
@lukomatico
Ай бұрын
Thank you so much for your kind message Simon!! :-D I really appreciate it mate!
thanks for putting examples behind the numbers luke! hardware binning did have a purpose with CCD sensors, when electrons were added up per row it actually did do more than just downsampling in terms of noise. but with CMOS sensors, there’s no difference between binning while shooting and just downscaling your image afterwards, unless you’re worried about storage space or something. and as you’ve shown, even when very “oversampled”, there’s still plenty of gains to be had by using everything your sensor is capable of!
@lukomatico
Ай бұрын
Thank you Gabe!! I'm glad you found this enjoyable mate, it certainly seems like oversampling in the traditional sense is not something to be worried about so much anymore! :-)
Thanks for this Luke. Really well explained and helped my understanding tremendously. Very much appreciate your contributions to the broader community. :)
@lukomatico
Ай бұрын
Thanks ever so much mate!! :-) Clear skies to you!
Great work! I enjoyed the livestream you did while preparing for this video. It’s nice to hang out while imaging or when the weather is bad. Either way is a win!
@lukomatico
Ай бұрын
Thanks mate!! It was nice to share the stream with people :-D Thanks for watching!!
Very interesting results Luke. I can definitely see the individual results from the different levels of binning. I've always wondered what would happen if I did any binning on my images. Might have to give it a try and see. Great video my friend! Clear skies!!!!
@lukomatico
Ай бұрын
Thank you mate!! I definitely feel it's always worth a try on your own system for this kind of thing! :-) Hope you have a lovely weekend my friend!! All the best, Luke
A superb video Luke and a proper simple explanation of this topic. Great! :)
@lukomatico
Ай бұрын
Thanks mate!! :-D glad you liked it!
Your comparison videos have so very much helped me make good imaging settings decisions. Have also helped me understand the different concepts to begin with. Thank you, Luke.
@lukomatico
Ай бұрын
Thanks so much for watching!! :-D
The great people of the internet needed this video. Thank you for such a wonderful video and explanation!! You rock :D
@lukomatico
Ай бұрын
Haha! :-D Thanks ever so much Sarah!! Really glad you enjoyed it!
This was great information and the demonstration was perfect. I’ve never done binning because I simply thought that I would lose resolution. However, I am inclined to experiment with this using my ASI533 on the C8. Thank you
@lukomatico
Ай бұрын
Thank you so much for watching mate! glad it was useful :-) Clear skies!
Really interesting video Luke and as always well explained. For me I think of all the advancements in software the biggest game changer has been blur xterminator. Why anyone would spend the money we do on equipment and not invest a relatively small amount on software like pixinsight and blur xterminator I've no idea. 👍
@lukomatico
Ай бұрын
Agreed mate, bxt is absolutely the best money I've spent so far in astro! :-) Clear skies to you!
That was a lot of work Luke, well done! And fascinating as well!
@lukomatico
Ай бұрын
Thank you mate!! :-D
Great explanation Luke! I’ve watched a few vids on this over the years and it’s been as clear as mud to me! Finally fully get it. Cheers! 👍🏻Noddy
@lukomatico
Ай бұрын
Excellent to hear it mate!! Thank you for watching and sharing! :-D
I remember decades ago when the only cameras around were from SBIG and cookbook cameras (for those on a budget) binning was used to gain sensitivity and increase well depth because you were increasing the capture area of the cell. Typically the L channel was bin-1 for max resolution but R, G, & B were binned 2 to pickup sensitivity with a slight loss in resolution (but that did not matter since it was just color info). Have these benefits gone away with our modern CMOS imagers?
@lukomatico
Ай бұрын
Great question mate!! - with CCD sensors binning should be more efficient as they only have one injection of read noise per given read area, CMOS need to read out each individual pixel before binning can occur, leading to as many samples of read noise as there are pixels being read - but the good news is CMOS has such a low read noise in the first place, and the read noise is calculated within a square root, that it equals out in the end and CMOS binning ends up being just as efficient as CCD binning in practice 👍 Hope that helps!
@w8bya
Ай бұрын
@@lukomatico Awesome to hear. Heck might be an idea for a future video....one that shows possible sensitivity advantages of binning (wink-wink).
Hi luke great explanation and very easy to follow thanks Luke for taking the time to make these videos
@lukomatico
Ай бұрын
Thanks so much for taking the time to watch and comment Tony!! It's very much appreciated my friend :-)
Very very interesting. Especially the part about BlurX and Bin1 vs Bin2. I normally go for Bin2 with my ASI 294MM PRO and EdgeHD 9.25 because of over-sampling but I'll absolutely experiment with Bin1 now. Thanks!
@lukomatico
Ай бұрын
Cheers mate!! - I think it's well worth an experiment with deliberate oversampling!! :-) Clear skies!
Great video, Luke! Your graphs were perfect - not crappy at all, but very illustrative. Thanks for the great explanations.
@lukomatico
Ай бұрын
I appreciate that Greg! - Thanks so much :-)
like 227 👍🏻
@lukomatico
Ай бұрын
Thank you! Cheers mate!!
Excellent presentation Luke. I've been thinking about this quite a lot recently for my RC which has a long focal length as well. I think in my case binning 2x2 would be the best compromise (especially on a full frame sensor) to take advantage of the 2x increase in SNR. Whether or not to drizzle as well would be an interesting experiment as drizzling reduces SNR and may well cancel out the benefits of binning.
@lukomatico
Ай бұрын
Thanks ever so much Pete mate!! - I think you're spot on really, bin2 and using APP to drizzle a small amount (1.2/1.3x) would be a really nice compromise at this focal length, and should help make storage and stacking of those massive full-frame files a little easier!! :-D Clear skies mate!
Fantastic info , well presented . Thanks Luke !
Excellent explanation nice job mate 💪🏼💪🏼💪🏼
@lukomatico
Ай бұрын
Thank you mate!! :-D
Thanks Luke.
Hi Luke great video mate
@lukomatico
Ай бұрын
Glad you enjoyed it mate!! 👍👍
Very interesting, but my self, see more detail on my screen on bining 1*1 In my case, my C8 with my camera is recommended for binning 2*2 haven't tried yet, but will do same experiment once M42 comes back for winter.
@lukomatico
Ай бұрын
Thanks for sharing mate!!
Interesting.
@lukomatico
Ай бұрын
Thanks so much mate!! :-D
Shouldn’t you also take into account the seeing? If the seeing is poor, the oversampled image isn’t really capturing the detail that it feels like? And of course some of the post-imaging “sharpness” from drizzle and/or deconvolution is sort of artifactual, using math to guess what the missing values are. But it did seem like your sharpened images on bin=1 were “better” than what you got from bin=2, even though I suspect your pixel scales were far lower than your seeing? Very interesting!
Great analysis Luke, thanks. Apologies if I missed it, but how would you rate the seeing during the capturing of this data?
@lukomatico
Ай бұрын
Thanks mate! - it was very much just an average night! :-) Clear skies!
Thank you for the wonderful comparisons Luke. Much appreciated. I’m reluctant to show my ignorance, but what exactly is “over/under” sampling? Seems like it should be self evident, but I still feel I’m missing something in the definitions.😊
@lukomatico
Ай бұрын
Thank you very much indeed Joe!! - RE: under/oversampling, undersampling I suppose could be defined by if point sources are looking pixelated when viewed at your usual viewing size, oversampling is perhaps a bit woolier to define without knowing more about someone's setup and seeing conditions! Cheers! :-D
Dithering just seems like pixel shifting.
Interesting Video Luke, thanks. I’ve often heard that one can Capture the RGB data binned 2x2 and LUM at 1x1 for the detail. Is this still a relevant and appropriate technique? 🧐
@lukomatico
29 күн бұрын
It's certainly possible, but you may as well capture 1x1 in most cases then simply resample afterwards 👍 (unless the storage/stacking speed benefits make bin2 RGB just too appealing!)
Hi Luke, I switch from OSC to mono recently so my question will certainly sound "basic" (if not dumb...). When you shoot in bin 1x1, what scale setting do you use in PI for drizzling in your post-calibration. Is it "2" as most people suggest? Thank you!
@lukomatico
26 күн бұрын
Hey David! :-) A good question I think! - I actually don't use PI for drizzle, but AstroPixelProcessor instead, where you could use a droplet of 0.5 and scale of 2 to achieve a 2x drizzle effect, - hope that helps!
Very interesting & well explained mate I'm guessing you're shooting this target using a mono camera? I only ask as it makes me wonder why colour cameras have bin options as when you use any of then except bin 1 they shoot mono.
@lukomatico
Ай бұрын
Hey Tich mate!! Aye this was taken with a mono cam, osc binning is an interesting subject all of itself for sure! Clear skies bud! :-D
Ok Luke - question for ya…. With 115mm with .8 reducer in bortle7 What Bin and Drizzle level will help my images best? Using PI, BXT, etc..?
@lukomatico
Ай бұрын
I'd say go it depends a bit on your scope and how much detail it can resolve, worth giving a go at bin1 for sure, dependant on target try drizzle too if you're going for max resolution! :-)
What happens if you have the situation of oversampled data, choose to bin to gain speed and signal:noise… then take the image that is essentially 1/4 the size and go Image 200% (splitting that binned 2x2 pixel back into 4 pixels), then run deconvolution and finish processing?
how did you get on with the backyard universe upgrade?
@lukomatico
Ай бұрын
Good bit of kit mate really, haven't had the newt out a great deal to be honest but last o checked it's held collimation and is ready to go 👍
aows tha Bin
@lukomatico
Ай бұрын
Ah not bin too bad sithee! 😂