BIM - Revit Site Design 01 Creating Topography l Contour l Terrain using Toposurface. Tutorial
Creating topography using toposurface in Autodesk Revit 2016.
Жүктеу.....
Пікірлер: 71
@ibrahimj.m85667 жыл бұрын
hi , i have a question if u may help , i have a contour lines i imported from autocad , but when its extracted to a mass its not considered as a from that i can make voids in it like inside it , the only commands that working are massing and site commands , which is not the needed here , i need a way to make voids inside the contour mass not on surface ( for example a well ) .
@NonStopLearning101
7 жыл бұрын
Hi ibrahim j.m, thankz for watching... ;) to answer your question, you can use "Building Pad" to create void...enjoy!
@mudpuddle83336 жыл бұрын
sometimes it more helpful if you try to teach rather than show how fast you can move your mouse with fancy pop music..
@NonStopLearning101
6 жыл бұрын
thankz for watching...
@charbelhayek839
5 жыл бұрын
you're right bro
@dariofortunato2784
5 жыл бұрын
@@NonStopLearning101 And make these files available to use. Its one thing watching but physically doing it helps.
@RiyaKumari0404
3 жыл бұрын
I agree. adding music to software tutorials is the worst decision. Period.
@rohitsohal53397 жыл бұрын
thanks for the awesome video I jus see it before i was going to work for a site where my first work was to creatw contour and calculate catchment area for water canal that was really superb
@NonStopLearning101
7 жыл бұрын
Thanks Rohit Sohal for watching... ;) appreciate your positive feedback good luck to your project!
@abhimanyu9099
6 жыл бұрын
hey rohit can u send me contouring pt on my mail aevi1994@gmail.com
@vecihihurkus32875 жыл бұрын
how to that without isohips curves.just code(height point)
@zakiahunt29606 жыл бұрын
very helpful, am I able to export this file as an stl and 3d print it from this point or is there more that has to be done to give the mass depth?
@NonStopLearning101
6 жыл бұрын
Thanks for watching. just add layers in your massing.
@sarasayad_4 жыл бұрын
i swear to god i watch this video every semester
@NonStopLearning101
2 жыл бұрын
Glad you liked it
@ZNB9995 жыл бұрын
It was so helpful for me. Thank you so much
@NonStopLearning101
5 жыл бұрын
THanks for watching!
@fatihgunes50114 жыл бұрын
That was very helpful ! Thanks.
@NonStopLearning101
2 жыл бұрын
Glad you liked it
@stepscourse7 жыл бұрын
can i get autocad file to work like what you do ?
@NonStopLearning101
7 жыл бұрын
Thankz for watching Mahamed Wagih,,...;)
@mauricioberrioduque39324 жыл бұрын
Thanks from Colombia
@NonStopLearning101
2 жыл бұрын
glad you liked it
@aoquangchien8236 жыл бұрын
Thank you so much!! Your videos is very helpful for me! I always wait your next Revit's tutorial video!!! :3
@NonStopLearning101
6 жыл бұрын
thanks for watching...
@7ds3976 жыл бұрын
thanks a lot for this tut. , i need the auto cad File with Pic. of Contour lines Please .
@salesapepe Жыл бұрын
Thank you!
@NonStopLearning101
Жыл бұрын
You're welcome!
@shrutireddy80633 жыл бұрын
THANKS A LOT IT WAS VERY HELPFUL
@NonStopLearning101
2 жыл бұрын
Glad you liked it
@langakhanyile48472 жыл бұрын
where can I download topographic maps with contours relevant to the location of the project ?
@NonStopLearning101
2 жыл бұрын
Thank you for watching. I can send to you
@adarshpatel85086 жыл бұрын
thanks for upload this video, i have a question , how can i download this video tell me.
@NonStopLearning101
6 жыл бұрын
thankz for watching... you have to install youtube downloader software or app
@eyadradwan67427 жыл бұрын
Thanks for the video Is it possible to get your AutoCAD file
@eyadradwan6742
7 жыл бұрын
my e-mail: eyadradwan@gmail.com
@NonStopLearning101
7 жыл бұрын
Thankz for watching eyad radwan.. I have to check the cad file
@pisatiajay
4 жыл бұрын
@@eyadradwan6742 how you drawn autocad file with levels snd that vedio
@johnsontan19876 жыл бұрын
Is it possible to have your Autocad file? Thanks!
@johnsontan1987
6 жыл бұрын
tkkeong1987@gmail.com
@NonStopLearning101
6 жыл бұрын
Thanks for watching Johnson....let me check if I still have the autocad file
Пікірлер: 71
hi , i have a question if u may help , i have a contour lines i imported from autocad , but when its extracted to a mass its not considered as a from that i can make voids in it like inside it , the only commands that working are massing and site commands , which is not the needed here , i need a way to make voids inside the contour mass not on surface ( for example a well ) .
@NonStopLearning101
7 жыл бұрын
Hi ibrahim j.m, thankz for watching... ;) to answer your question, you can use "Building Pad" to create void...enjoy!
sometimes it more helpful if you try to teach rather than show how fast you can move your mouse with fancy pop music..
@NonStopLearning101
6 жыл бұрын
thankz for watching...
@charbelhayek839
5 жыл бұрын
you're right bro
@dariofortunato2784
5 жыл бұрын
@@NonStopLearning101 And make these files available to use. Its one thing watching but physically doing it helps.
@RiyaKumari0404
3 жыл бұрын
I agree. adding music to software tutorials is the worst decision. Period.
thanks for the awesome video I jus see it before i was going to work for a site where my first work was to creatw contour and calculate catchment area for water canal that was really superb
@NonStopLearning101
7 жыл бұрын
Thanks Rohit Sohal for watching... ;) appreciate your positive feedback good luck to your project!
@abhimanyu9099
6 жыл бұрын
hey rohit can u send me contouring pt on my mail aevi1994@gmail.com
how to that without isohips curves.just code(height point)
very helpful, am I able to export this file as an stl and 3d print it from this point or is there more that has to be done to give the mass depth?
@NonStopLearning101
6 жыл бұрын
Thanks for watching. just add layers in your massing.
i swear to god i watch this video every semester
@NonStopLearning101
2 жыл бұрын
Glad you liked it
It was so helpful for me. Thank you so much
@NonStopLearning101
5 жыл бұрын
THanks for watching!
That was very helpful ! Thanks.
@NonStopLearning101
2 жыл бұрын
Glad you liked it
can i get autocad file to work like what you do ?
@NonStopLearning101
7 жыл бұрын
Thankz for watching Mahamed Wagih,,...;)
Thanks from Colombia
@NonStopLearning101
2 жыл бұрын
glad you liked it
Thank you so much!! Your videos is very helpful for me! I always wait your next Revit's tutorial video!!! :3
@NonStopLearning101
6 жыл бұрын
thanks for watching...
thanks a lot for this tut. , i need the auto cad File with Pic. of Contour lines Please .
Thank you!
@NonStopLearning101
Жыл бұрын
You're welcome!
THANKS A LOT IT WAS VERY HELPFUL
@NonStopLearning101
2 жыл бұрын
Glad you liked it
where can I download topographic maps with contours relevant to the location of the project ?
@NonStopLearning101
2 жыл бұрын
Thank you for watching. I can send to you
thanks for upload this video, i have a question , how can i download this video tell me.
@NonStopLearning101
6 жыл бұрын
thankz for watching... you have to install youtube downloader software or app
Thanks for the video Is it possible to get your AutoCAD file
@eyadradwan6742
7 жыл бұрын
my e-mail: eyadradwan@gmail.com
@NonStopLearning101
7 жыл бұрын
Thankz for watching eyad radwan.. I have to check the cad file
@pisatiajay
4 жыл бұрын
@@eyadradwan6742 how you drawn autocad file with levels snd that vedio
Is it possible to have your Autocad file? Thanks!
@johnsontan1987
6 жыл бұрын
tkkeong1987@gmail.com
@NonStopLearning101
6 жыл бұрын
Thanks for watching Johnson....let me check if I still have the autocad file
@johnsontan1987
6 жыл бұрын
Thanks!
I am unable to import cad file in revit
@NonStopLearning101
5 жыл бұрын
Thankz for watching! try "linkcad"
Thanks
@NonStopLearning101
2 жыл бұрын
Thanks for watching
Is there any shortcut for selection ??
@NonStopLearning101
Жыл бұрын
Thank you for watching! yes
@anuragkhati4547
Жыл бұрын
What is it ??
not compatible with revit 2018
@NonStopLearning101
5 жыл бұрын
Thankz for watching
I need this dwg file..?
@NonStopLearning101
2 жыл бұрын
sure, thank you for watching
?I want to autocad file ,please
@NonStopLearning101
6 жыл бұрын
Thanks for watching Reem! ;)
where is the file
@NonStopLearning101
2 жыл бұрын
Hi, which file? thank you for watching
The music is such a distraction.....
@NonStopLearning101
2 жыл бұрын
Thank you for watching 😉
too fast...
@NonStopLearning101
2 жыл бұрын
playback speed to make it slow
Annoying music
Lose the godawful music.
@NonStopLearning101
Жыл бұрын
Thank you for watching!
Thank you!
@NonStopLearning101
6 жыл бұрын
Thankz for watching Sansewai