I would take the end off and use a zip tie to keep just the hose on the bleeder and bypass the ends.

Great review! I bought this kit to bleed my 66 Mustang. By the way, super sharp Lamborghini!

@Turnersspeedshop

11 ай бұрын

Thank you! Always appreciate the support..I have used it a bunch everything from the chevelle, lambo, truck, u name it. Definitely got my $ worth.

Wow what a coincidence! This happened to me last weekend, when I was trying to bleed the brakes on my pickup truck and the weather wouldn't cooperate for my video, so I just said screw it and bled the brakes on my Lambo. lol

@Turnersspeedshop

2 ай бұрын

Great minds think alike

Amazing tool. I used it on a pt cruiser with a built a604 with 42rle and a904 internals shift kits limited slip differential and more.. i simply overfilled the reservoir..pre pumped.. then used the tool and repeated.. and you need atleadt a 20-30 gallon compressor to use this bleeder. My braking is way better. I got new calipers. Off amazon. A premium brake hoses and bosch ceramic split pads and drilled slotted rotors

Thx for the review man. Btw its always nice to see a dad and his son do car stuff. wish my dad did the same with me.

@Turnersspeedshop

8 ай бұрын

Thank u brother appreciate the kind words. Hope it was helpful.

@monstaro19

2 ай бұрын

Me n my dad built up my pt cruiser. It's a beast now. Great memories. Also I joined the army in a car shop

I bought it and it works perfectly, thank you

@Turnersspeedshop

Жыл бұрын

Awsome 2 hear!

Just got one of these, thanks for the video.

@Turnersspeedshop

Жыл бұрын

Let me know how it works for you. I would be curious to see if you found any tips or tricks I haven't discovered

HMMM? Fitting sucks air,.... IMO, (what I will try, in 20+- minutes) FIRST, use the fittings that you remove the OEM fitting, anf directly attach the hose, Then, once you know, it's all fluid and air out, Then, quckily (to avoid much air) switch over to the OEM bleeder and the push on fitting, (he used) and finish the last short area in the calipers,..... (As he said, to simply bleed, puch on worked OK,.... YET, If you know,.. you have air in the lines, (replaced parts etc) then the push on may be a small issue....... It comes with the direct hose fittings.

16:55 its meant to use air. Thats why i pre pumped before using tbe tool and after

Try grease around the entire bleeder screw, air likely coming through threads on bleeder. Hope that helps thanks for the review

@Turnersspeedshop

Жыл бұрын

Will give it a try..Thanx 4 the tip 👍

@strumpeteer

Жыл бұрын

Many have given this tip but dripping brake fluid from the nipple on to the threads eats right through the grease. (Ive tried it)

@remogaggi82

Жыл бұрын

@@strumpeteer even with pure silicone grease?

@strumpeteer

Жыл бұрын

@@remogaggi82 to be honest, I used Sil-Glyde. Perhaps that’s too thin?

13:53 I bought that same dog water dish back in 2008 to drain the oil from my old Kawasaki.

@Turnersspeedshop

2 ай бұрын

I swear some of my favorite garage tools come from the kitchen goods section at the store🤣

@chemicalspore

2 ай бұрын

@@Turnersspeedshop haha, I buy kitchen funnels from the dollar store.

@Turnersspeedshop

2 ай бұрын

Pretty sure my wife has had 2 replace the turkey baster once or twice as well 🤣

@chemicalspore

2 ай бұрын

@@Turnersspeedshop haha

Please USE JACK STANDS FOR THAT LAMBO 🙏

Lambo wheels got 2 break calipers nice

What psi were you drawing? My home one is a 26 gal and i can get about 150 psi.

14:08 fluid on the lambo looks ok.. but the truck was too green..

Nice video! And cool lambo, what year is it?

@Turnersspeedshop

2 ай бұрын

Thank you! It's an old school Gallardo. 2004

Whats the difference in using actual racing brake fluid vs normal synthetic brake fluid for a performance setup ?

@Turnersspeedshop

2 ай бұрын

Correct, the boiling point is much higher in "racing" application downside is it doesn't last as long needs flushed more often

Great Job!! Can this vacuum bleeder be used on drum brakes? Thanks. 👍

@Turnersspeedshop

8 ай бұрын

Great question! I have not personally used it on drum brakes but I certainly don't see why it wouldn't work

@rapaent

8 ай бұрын

Thanks.... Appreciate it. Happy Holidays!!@@Turnersspeedshop

@Turnersspeedshop

8 ай бұрын

Happy Holidays 2 u as well! Thanx 4 the support

I used this and didn't get a drop of fluid. Compressor to 140 psi. Nothing. New bleeders. Nothing!

@Turnersspeedshop

10 ай бұрын

Defective unit? If you put a finger over the end of tube could u feel a vacuum?

@jumpie2419

10 ай бұрын

@Turnersspeedshop yes. I filled a cup with fluid and it worked. Pump the breaks and get fluid that way. Just not with the vacuum.

@BriNbigD

8 ай бұрын

Did you open the bleeder valve?

@jumpie2419

8 ай бұрын

@BriNbigD YES, I opened the bleeder! Even replaced it in case the original was damaged.

@josephv3849

3 ай бұрын

@@jumpie2419proportional valve stuck? Might have to blow air back to pop it back to neutral on older cars