Okay I probs didn’t give that front pipe the best showing at erzberg 😂😂 but I promise it’s a lot more out the way.

@dewimtbmoto7586

Жыл бұрын

Yes, I did chuckle as soon as you mentioned it.

@slimrr4

Жыл бұрын

😂😂😂

@user-gh5sy1ih8h

Жыл бұрын

Would you run a pipe guard in the future?

@dougandtheboys6411

Жыл бұрын

And then reality set in. You killed Bill. keep up all the good work.

@Madtigertv

Жыл бұрын

hahaha First thing that came to mind lol

the front pipe not smashing did not end well🤣

@singletrackassassin

Жыл бұрын

You beat me to it! Haha

Did so well with a broken front brake and an absolutely squished front pipe…..well done Uncle Bill dog ⚡️🔥💪🏻

Don’t worry about the engine technicalities that’s what we have Tommy for

Favorite rider. A true enthusiasts rider. Shares info that real world riders care about. All the best to ya Billy !!!

Stan is the MAN, he’s a top tech for sure. You are lucky to have him Billy.

Wes all love a good ol bike check thanks Bill dawg

The pipe 😂 flattened that bad boy out….. you rode great Billy 👍🏼

Keep being yourself Billy love your work mate

Hi Billy. thank you for that, I always appreciate bike check videos, it's great ! big congratulations for P2 at the race, it's really amazing ! When you were 1st for a long time, I really belived you would catch the win , but finally... It will be for next year ! keep going on and take the crown at the end of the championship !!! GU ON !

Thanks, man! That is such a sweet bike.

Great review, well done!

Dang Billdog, that was a good job you did there. 👍

Bill you do have one of the best looking bikes in the paddock? Good job at the race man. It was awesome to see you out there turn it up. Good luck in the rest of the season.

such a sick bike

Ta for the show round the new wip , nice work on getting the exhaust tucked in even more than husky intended 😂, do you think it was the difference between winning and 2nd ? You both looked on your game ,appreciate your effort mate , Gurrr on !!

Famous last words about smashing the front pipe 😝

⚡️BB57⚡️ It’s a nice one for sure! Had some issues with my 22 te300i Rockstar edition lately and definitely wish I had a tbi instead of my tpi. It’s the only reason I’ll upgrade one day. Keep tearing it up buddy! 💪🏽🏍️💨

Love the comments on the higher/tucked in expansion chamber, bet you had a laugh in the edit given the event's carnage, GOLD hahaha

Can’t wait to see ya yo at silverkings!

Great video

wish you did a video on how beat up the bike is after the race and what needs replacing etc love the content tho i like the servicing maintenance details too involve your mechanic more instead of just headlocking him lololol

Definitely liking the look of these bikes more than the rockstar bikes

Love the looks of it and 3 months already i think you should give ot away to one of your fans😂

Sharp looking Husqvarna,, I ride a 2020 300 fi. I need to bolt up the grab handle, over the back fender/ seat. Great riding out there, keep on sending it to the finish line, now that the creeks are frozen in North Central Alberta, time to stud up the tires. Have fun

Beauty😍

I knew its higher seat when he raced Serbia. I wish Sherco offered high not just low option, need to get aftermarket foam and cover.

I hope we get to see RoxyCam at Silver Kings! 🤩

Roxy does 'I'm a teapot' !

Still waiting for Bill to play on a 70's trials bike, specially a Sherpa like I had, or any period rival !

The 2024 models don’t have the triangular hole in the frame near the top of the shock absorber 1:53 Come on Billy, you’re on a 2027!

Interested to know the front and rear sprocket sizes

@stevenb0508

8 ай бұрын

Did you manage to get the answer?

@zviki93

6 ай бұрын

@@stevenb0508i would like to now the same ? Originally is 13/45 on my bike..in this video I have seen rear one is 49.

@stevenb0508

6 ай бұрын

@@zviki93merci pour l information. Oui je suis en 13/45. Je pense passer en 13/47. Le 49 me semble trop court pour rester polyvalent.

Would like to see an after ezberg bike walk through to see the wear and tear of one race

🙋🏼‍♂️ I have a question @BillyBolt57, you've mentioned in other videos about the handle bars you use, and just explained some of your reasoning for the 20mm higher seat which was great. Could you explain how you know what bar postition you need ? Or better still maybe do a video explaining to us basic folk how to set up a bike for the right rider "triangle"/position. Watched a load of your videos recently, great content. I didn't know skipping the adds was a problem, I still skip them but now when I go out I put your channel on for the dog instead of the radio, she watches the ads for us both. So while I'm making requests if you could throw in the odd "good girl" to your vlogs it'll keep her from skipping the ads too 👌🏻

Would love to know where your forks sit on the clamps, flush? or a little bit lower? and the clicker settings.

Billy your a tease with them loose shorts on!!😂😂🤣😛

Cool video. The bike looks mint, not going to lie though, i threw up a bit when i saw the air pressure sensor😅😅😅. It looks like its in a much better place now though.

Curious about "the button" above the tank, 👀

The 2024 TE 300i is just definitive the bike of the bike in the paddock !!! Cheers bro 😉

Great clip, really enjoy the content…quick observation; why do you use the Brenbo brakes and clutch when the stock bikes uses Braketec? Is there any noticeable performance difference?? Cheers

Sweet bike. Brembo, hahaha awesome. Maybe Husky should come out with a TE 300 factory edition kitted with Brembo instead of Braktek.

How fast does it go mister 😮

Everyone wants to know GEARING

Did you race with the same engine you did the burnouts with in town? What apart from the tires did you change before the main race 😅

What i ride and ride it awesomely i do!

Hard enduro gearing and prologue gearing. Or transmission if it isn’t stock

Do you ever get to keep any of the factory bikes? Or do they give you a personal bike?

4:20 Not a production 24 frame. Probably the 2025 frame with more flex (shock tower has cutouts).

PLEASE tell us where to get the nylon webbing strap on the back of your seat. The new bike design is very hard to lift with the airbox holes. That strap is KEY! Where does it bolt to? Who makes it? Somebody post a link please if you know about any strap for the rear of the new chassis. Thanks!

2:30 Famous last words...

Undersized and drilled mousse for hard enduro? And how many rim locks?

what size sprockets are you using

Do you still use a taller XC first gear in the gearbox like in your old extreme bike

THANK GOD THEY CHANGED THE SUBFRAME!

Standard flywheel or heavier?

Billy’s how do you combat arm pump?

Can you tell me the spec of the handlebar?

I guess your not allowed to mention the internals of the engine? Would be awesome to know what's inside a factory motor and how much it differs - Maybe one day!

Hello idol, I'm from Indonesia🔥

Will you post a race video ?

Where is the oil tank fill? On the 24 we have in our showroom it is still oil injected with TBI. The TX300 we have is premix, so what is your bike?

I'm shocked how little these pro riders know about their engines considering the fact that it's the most important part of the entire bike, still can't forget Graham Jarvis forgetting his bike has a Kickstarter, nice bike Bill but that pipe😂so much for "it's outta the way more"

@robsonenduro3316

Жыл бұрын

agreed, I'd like to know more technical details during bike check as we amateurs do everything by ourselves.

@dougderby9454

Жыл бұрын

Indeed. Graham rides so any diff Te300’s though. Continent after continent with schools, tours and race events. 😊

@Lee-fn6en

Жыл бұрын

A pro rider just has to ride what there given.

@joshpodolsky7740

Жыл бұрын

I beg to differ, the engine is not even close to the most important part of modern bikes. I'd say suspension and chassis, you could take a 300 motor from 2008 and stick it in this 2024 and it would feel 95% as good I bet.

@cfvgd

Жыл бұрын

For them suspension is the most important. Engine codes last

Nice bike! In competition, what are the average hours of use that this engine needs a top end and a full rebuild?

How much sag do you shoot for on the fork? 30mm sag on the rear only? Or, talking about static sag?

whats your new gearing ratio sprockets?

I have a question. Where do flys go at night time?

Come sono cambiate le caratteristiche di guida della nuova moto rispetto alla vecchia?

Hi , you dont mind that husky motorcycles got heavy more than ktm , there is no struggle ?

how is processed the lubrification of the engine??? thanks for your videos

@OtisFlint

Жыл бұрын

His is premix. The production model is oil injected.

Hi Bill, What’s the go to gearing on the new 24 bikes for hard enduro? Example the TPI was 12 48. Thanks Dave.

@heyman8820

Ай бұрын

Thanks Dave

Are the new ‘24 TE300 suppose to have the oil port in the frame? I know they can be removed and mix your own gas but have 2 on order and wondering what stock comes with.

@lostinpa-dadenduro7555

Жыл бұрын

It’s supposed to come with oil injection on the Enduro models. Cross country models do not have it.

Anybody notices how mani and Billy run a special spacer on their front brake master to raise their handguard a bit higher thank stock? I’ve been looking for more info on this but no one seems to know the answer! Maybe a different bracket that can fit a spacer to lift it higher?

@BillyBolt57

19 күн бұрын

It’s not for the hand guard it’s because it’s a different master cylinder. If anything the hand guard being higher is worse.

Why Billy not using some rad guards like most of us do?

Two rimlocks or one on wheels?

What should be the most suitable gear selection for Husqvarna TE250 2024?

So Billy only uses 30 or 40 mm out of the 300 mm available rear?? Loaded sag? What , I might have not understood properly?

where can we buy this bike i really love this bike.

New pipe wasn't high enough for Carl's Dinner eh Billy?

So you present the bike with a fmf muffler but you run an oem one with fmf stickers in real, why is that?

what gearing you liking with the new motor and trans? I see a 49 on the rear of this bike...

@lukereds733

Жыл бұрын

It would be 12/49

2:25 foreshadowing

what is the front sprocket

Hey Bill, question for Stan. Looks like the oil pump has been deleted? Running premix in the gas at 60:1?

@badcompany1313

Жыл бұрын

The new bikes are TBI instead of TPI which uses premix again! No more oil pumps. I’m not positive on the recommended premix but 60:1 seems a tad lean

@lostcausesingletrack8015

11 ай бұрын

@Badcompany1313. That’s not true on the te. Only true on the tx. Looks like they have it deleted on this bike.

30mm sag? 😮😮😮

Why do you run glue on instead of lock on grips? Is there an advantage?

@madMX96

Жыл бұрын

softer, less prone to damage

why dont you have oil injection like in tpi and 24 factory bikes

where can i find a blue rear fender for a 24?

Would anyone but a professional rider notice a 20mm seat height difference?

CAN WE BUY THE BILLY BOLT GRAPHICS PAckAGE?

Oil injected?

how much?

Why no rad guards or braces?

Does anyone know the exact front tire that is? I know it’s Michelin, but what one

@virjoghealexandru5072

10 ай бұрын

Enduro medium

2:27 "very impresive how little you'll smash your pipe with this new bike" 😂😂😂 well we all know how that turned out 😅😅

Hey @BillyBolt57 or anybody :) does anyone knows what is the point of having a additional on/off switch to kill the engine on the left side of a handlebar, even tho the kill swith (red button is next to another kill switch)? Looking to change the buttons on MY2024 because the new kill switch is utter crap. Thanks for replay

Is the Bike a TBI or TPI..........

are pistins still cheap and blow up

Show the bike after Erzberg

2025s will be out next week!

Wait Brembos are on the 2024 models???

@jarrod1687

22 күн бұрын

No, only the grey pro model