aye you really helped me out with my aw11 build, wasn't sure on what dizzy plug to use. thanks for the good footage

@leveledupgarage5303

2 жыл бұрын

No worries. Glad I can help

Loved this series! I own a 1989 AE92 sedan myself with the carbureted 4A-F engine, and one day I plan on doing something similar. Though instead of R1 or CBR carbs, I'll be using some KZ900/1000 carbs (aka Mikuni VM26 26mm carbs).

@leveledupgarage5303

2 жыл бұрын

Awesome. Those are good carbs as well. Really they are all pretty similar. Just set em up correctly. Would be awesome to see a 4af on some bike carbs. Tag me once you get that going. Would love to follow that.

@insertnamehere34944

2 жыл бұрын

@@leveledupgarage5303 Definitely! Sadly it'll be a very long while until I'm able to start on the bike carb swap, but I'll be sure to let you know when I do!

@rogerwilliams2042

2 жыл бұрын

I was told that carbs from a 600 type motor cycle is sufficient for the stock 4AGE and the carbs from a 1000 or so bike will have issues running

@leveledupgarage5303

2 жыл бұрын

I've ran r1 carbs on everything. No issues. I've heard the same thing about smaller bike carbs as well. I figured guys run weber 40 and 45 on these, so an equal size carb should be fine.

@rogerwilliams2042

2 жыл бұрын

@@leveledupgarage5303 ok cool good to know thanks bro!!

Can you do a more detailed video on fuel line input and electrical! Yes want to see more please

@leveledupgarage5303

2 жыл бұрын

That's exactly what I plan on doin

How did you lock out the timing, if you don't mind me asking? Did you just run it to an MSD box and coil without the MSD ECU?

Curious if you've considered a see of 600cc carbs since from a lot of what I've read the liter bike carbs tend to be a little big for most 4ages

@leveledupgarage5303

2 жыл бұрын

I've talked about this with driving4answers. He seems to think the same thing. I've ran a few different setups and they all feel similar on the butt dyno

Hey mate with the intake manifold, did you just use mild steel?, it doesn’t rust out on the inside?

@leveledupgarage5303

2 жыл бұрын

Mild steel. Been using these for years. I paint them. The paint seems to do an OK job at keeping them from rusting.

I wanna see your wagon! I got a 95 wagon cruiser haha

@leveledupgarage5303

3 жыл бұрын

I ended up selling the wagon. I'll get another eventually.

What kinda jetting you used, mine tends to run way to lean first and way to rich at full throttle, causing it to misfire between 2k and 3k and then open up, i have the same setup but with honda cbr600 carbs, I've rebuild the carbs but still doing the same things and it doesn't idle as smooth as yours, has a way rougher idle...

@leveledupgarage5303

2 жыл бұрын

Hard to tell about your setup. I use 160 main jets. And raise the needles a bit.

are you using the stock 4age distributor with that msd coil and ignition module?

@leveledupgarage5303

2 жыл бұрын

Exactly. I'm using a generic gm hei ignition module. Locked the timing around 30° btdc. Eventually it'll get a setup for adjustable timing. For now it works.

hello!! How does the power and throttle response feel? My ignition module stopped working and I want to install carburetors, does it feel good in power? my engine is the same 4age.greetings !!!

@leveledupgarage5303

Жыл бұрын

It's decent. A little left on the table low end however.

What version of R1 Carbs Are Used For This Set Up Mate..Thanks

@leveledupgarage5303

2 жыл бұрын

98-01 try and get the newest possible.

how is it to drive with locked ignition? wanna do a bike carb conversion on a k11 micra but wont get the ignition timing to work without getting a new ecu.

@leveledupgarage5303

Ай бұрын

Runs pretty dang good. You lose some bottom end but these cars aren't known for the bottom end anyways.

What radiator is that? Trying to find find aluminum radiator that fits in my te72 wagon (5mge swap)

@leveledupgarage5303

2 жыл бұрын

Just the standard ae86 rad from ebay

So no Throttle position sensor? And where dose the fuel go?

@leveledupgarage5303

2 жыл бұрын

Nope. No ecu required. Fuel is a returnless setuo

can you send me some info on the carb set up i would like to see more content for sure.....

@leveledupgarage5303

3 жыл бұрын

They are just yamaha r1 carbs. 160# main jets and 20# pilots, Needles spaced up. Pretty standard and easy modifications.

Hi, what dizzy you use?

@leveledupgarage5303

2 жыл бұрын

Stock dizzy

Is there a spacer between intake and Head?

@leveledupgarage5303

2 жыл бұрын

No. Though it could probably use it

What is the difference between a ke70 and a te72? And you have my dream setup

@leveledupgarage5303

2 жыл бұрын

Te72 came with the 3tc engine and older style steering box suspension. The ae71/ke70 came factory with rack and pinion steering and the 4ac. Makes it super easy to drop in a 4age.

@joelhaakana8033

2 жыл бұрын

@@leveledupgarage5303 Okay. I have a ke70 now as my first car and im planning to keep it as a project/summer car, I'd love to swap a 4age 16v into it and do a bike carb setup

@leveledupgarage5303

2 жыл бұрын

@@joelhaakana8033 just try and gather everything you can before starting. Try to get it running as soon as possible, even if you gotta rig a few things up. Get it going and then go back over things as you get time/money

@RChero1010

2 жыл бұрын

@@leveledupgarage5303 idk if you're quite right there T- t series engine E- Corolla 7- gen Ending- what body/model. A ke72 is a k engine sedan I believe, my 1983 AE72 sedan had a 4ac

So you running without ECU, Right?

@leveledupgarage5303

2 жыл бұрын

Correct.

help im using the same setup but i used 3au dizzy and the engine wont rev way past 3k rpm

@leveledupgarage5303

2 жыл бұрын

Hmmm. Im not familiar with that setup. What are you using for igniter??

@michaelguintoTe71Liftback

2 жыл бұрын

@@leveledupgarage5303 im not sure about the igniter but do you have a facebook so that i can shoot you some video of my car running poorly

yamaha carbs for a yamaha engine

@leveledupgarage5303

Жыл бұрын

Exactly

also you can find me on istagram @gringopr40

Tvis