bigger holset turbo, new injector nozzles and 13mm pump elements,
Автокөліктер мен көлік құралдары
/ allistairc123
preparation for biggest competition of the year (#on the pull) by @farmflix.
• FARMFLIX #ONTHEPULL19 ...
I got a cheap holset hx50 , higher flow injector nozzles and 13mm pump elements from the Netherlands in the quest for more power !
I want to build a tractor that has a bit more power to compete with modern high horsepower tractors at these events but still be able to use it for work.
be sure to subscribe to see the race day and Dyno results of the new modifications.
how much power will it make!?
will it blow up!?
drop a comment!
Пікірлер: 89
This is such a breathe of fresh air! So many things I see on KZread are LS swapping into everything, it's getting pretty boring ... watching a guy have fun working on his tractor is awesome! Looking forward to part 2! Thanks for sharing 🇨🇦
After watching you l think you really enjoy mechanics and tractor pulling. A good way to have fun.
My favorite tractor of all time 8970, love the old tractors , use to cut with taarup double chop an Massey 178 multi power years ago, from Lapis, living in Florida now for the last 40 years, love you channell
@profitbldr1
8 ай бұрын
Laois
Love that Tractor what a beast 👍
Love to see my fellow countrymen doing well on KZread, love the videos and yes we dont get enough sun in Northern Ireland lol good luck and hope big blue does really well in the competition and will look forward to part 2
Great Video Alastair. What a change from the workshop for you. Really appreciated your descriptive steps preparing your tractor. Good luck and best wishes for a successful performance up the hill. Looking forward to your next Vid.
Zipties and BiasPlies glues a Mount to his Cap and sticks his GoPro on it.
That was a great watch, cracking work!
That machine pulled that trailer up the hill like it wasn’t even there, and the sound was class. Have to see it in person to appreciate it
Another good video. A lot of work and time invested there
Good looking tractor and sounds really good as well. Great job from the Texas 🇺🇸
Louis is a great fella, he showed me around your place one day I was down lifting crusher parts
Sure enjoyed this video. Varied content makes it nice.
Brilliant as always 👍🙏
Very interesting video really enjoyed watching it and learning about different ways to get the most out of an engine, big blue is an animal would love to have something similar someday!
Serious tractor 😍, the wrong shoes for the dance floor 😂😂
Michel at DES is a gentleman and will help you with anything . I had a great experience with him and got me out of trouble
yer pal chuckling at the end... makes all the money you spent well worth it! To this viewer anyway! Cheers from Santa Cruz California
I’ve bought four Ceat tyres from JB tyres. Two sets of front tyres for loader tractors. Wearing very well, seem to be good tyres
nice work
Great content your welder is a very Skilled man.
Before you changed turbo, you were getting high egt. This would more likely be because when you adjust pump to max it gets wasteful due to the dwell/ amount of rotation you inject fuel for, anything more than 32-34 degrees. Another thing to understand is turbo surge with bigger turbo......if the pressure gets to high for a given flow the gas stalls and resonates. This is one reason to compound turbos.
Just started watching u brilliant videos
Hey mate good luck on the pull, love your channel
That adapter plate could do with port matching as there's a fair bit of obstruction there .
@allistairc123
10 ай бұрын
We done that I also need correct gaskets , it's in my to do list
Smashin.
Go on big blue
Quality video
Power 👍👍
Thanks for the advert at the end lad 😂
JB.. Best About 👌
That test drive @ 22:28 😮 please make that a ‘short’ video. 👌🏻
GEARBOX will blow.
@pfamkuchen
9 ай бұрын
I think so too
nice torque, 2500 nm ish 🤩
Decent variable nozzle turbocharger Will provide you with Perfect power thoughout the range
Blue power 💪
Nice job! Those Powerstar units are savage. Any potential issues with increased HP on that gearbox? Are you going to hang a front weight off it?
@allistairc123
10 ай бұрын
Great story the previous owner seen my videos and reached out to me to tell me he had the original weights so I use them for the 11.5 ton class. The gearbox is good for just over 600 hp in standard form then you can increase pack pressure a little for even more power. Very strong box
More horsepower more better!!
Could probably calibrate the cluch make it a bit more sharp
Is the clutch, gearbox problem, a calibration problem?
when is part 2 coming out
Egt temp sensor needs to be before turbo. Exhaust mainfold for a good reading. Its around 200 to 300 deg lower at downpipe
@allistairc123
9 ай бұрын
It's in the factory location and the factory gauge is calibrated for that position
Compound turbos
❤❤
What tractor is this
Great job. How long have you owned big Blue.
@allistairc123
10 ай бұрын
I think about 7 years now
how did you decide that the hx 50 was the right turbo. have a agrotron 265 at 300 pto hp and the turbo is not holding up
@allistairc123
8 ай бұрын
I based it on its oem application
This is the Ford/New Holland 7.5 liter “genesis” engine? I looked a bit and I didn’t find much info on those as far as performance goes. I’m impressed with how well you’ve got it running, probably double factory power eh? Sounds absolutely lovely haha
@gabe1254
10 ай бұрын
PS, I came to your channel for the gouging/welding content… But the diesel performance stuff is great. I daily drive a ‘98 4x4 Dodge Ram with a mid 300hp 12 valve Cummins and a NV4500 manual transmission… your video has me looking at bigger injectors now, I just need a bit more out of her 😂
@bcbloc02
9 ай бұрын
@@gabe1254not sure where you are but I have been working with power driven diesel out of Utah on an altered spray pattern injector for the 12v that really do make excellent power with minimal smoke. They are called powerjets.
@gabe1254
9 ай бұрын
@@bcbloc02 you go with the stage 1?
@bcbloc02
9 ай бұрын
@@gabe1254 I was running the stage 2 and they burn cleaner than the common old marine 370's but make another 100hp. The 2's will easily get you in that mid 4-500hp range without a bunch of timing or other engine work like head or cam. You can always slide the fuel plate back if you don't want that much.
@gabe1254
9 ай бұрын
@@bcbloc02 how was the economy? I daily drive and tow at least once per week, so that is important to me…
mine g190 after changing turbo and fuel injectors has shown around 260 hp ;)
@AxeFS13
9 ай бұрын
and of course fuel pump from nh combine ;)
Hi there alistair , interesting video as are the others, just subscribed after the badgering haha , how do i get in touch with dikkenberg diesel?cant seem to find them online! I have a TM190 that i am thinking of converting to P Pump and would like to set it up like yours ! Thanks
@allistairc123
8 ай бұрын
I just looked , their website seems to be down!
@McG373
8 ай бұрын
@@allistairc123 ok thanks , ill try them some other time , looking forward to seeing more of big blue pulling ! Mean machine dificult to beat a 7.5 ford
egt probe goes before the turbo
Why does this turbo spool up way earlier on this engine then when it’s fitted to a om606 Mercedes
@allistairc123
10 ай бұрын
Yes because the engine has 7.5 litres of displacement to spin the turbo
I hate that I got to this video so late but that 22hsg is not going to be a good match it’s going to give up a ton of torque. The hx50 and 55 series turbos are not the most robust. I prefer the borg Warner s300 and s400 stuff. I don’t know how many cubes that ford is to make a good recommendation but if you want to email me the details I can probably get you onto something that will really thump.
@allistairc123
9 ай бұрын
Yeah I hear lots of good things about the Borg's, I've a 365 and 480 on my ram, but tractor will only be making about 50psi, as you know it's torque that breaks stuff! Do you think the hx50 can live at 50 for a wile?
@allistairc123
9 ай бұрын
It is 7.5 litre 457 cubes
@bcbloc02
9 ай бұрын
@@allistairc123 yeah with that 22housing it probably will live fine. The 16 and smaller is when we started sending the turbines out the tailpipes on the 5.9 dodges. A 13mm p pump can easily run an s472 if you don't mind turning it 3000rpm. I have several of them running 800-900 hp on 6076 Deere engines with nothing but fire rings done to stock engines. The Ford guy I worked with here we wound up having to get custom studs made for it to keep the head on as they don't have as strong a bolts as the Deere's. That is probably where you will be headed next if you get it under a hard pull with 50psi. 🙂 I don't think you have an intercooler but adding one would help turbo life and power. water injection would help too, easyil another 100hp.
@V8Lenny
9 ай бұрын
@@bcbloc0271mm HE500 will do 1000
@bcbloc02
9 ай бұрын
@@V8Lenny I have not seen a 71 break 1000hp but I have seen the 75s do it often. I would say that is too big for a dual use tractor though as it will have nothing under 2500rpm on a 7.5l
could hot glue a go pro to your hat like zipties and bias plies does
Whats the facebook group called?
350 hp out an 8870 original pump and original turbo
Do you regret leaving Australia.
@allistairc123
10 ай бұрын
Often yes
Uitlaat temperatuur naar beneden is meer diesel 😅niet meer lucht meer lucht kost je je turbo en je zuigers
Why running weird
I always measure EGT's pre turbo. Turbo and exhaust wrap is a good idea. It can be the difference between a bit of lag or not. What turbo was on there before?
@allistairc123
10 ай бұрын
Yes I debated where to put it, in the end I settled for the factory location so that I had comparable Before and after readings
@allistairc123
10 ай бұрын
It was the factory Garrett turbo before , don't have any spec details
@maniekmechanik
10 ай бұрын
@@allistairc123what size injector nozzles Dikenberg give you for 13mm elements 🤔 He give me 5x0.60mm nozzles fo 13mm elements
@maniekmechanik
10 ай бұрын
@@allistairc123great Job
Compound turbos