I enjoyed visiting with you on Sunday when you showed me the mill.

@fricknjeep

Ай бұрын

hi there i had a nice time as well . john

That Detroit sings such a nice song, it’s really running well.

@fricknjeep

Жыл бұрын

hi there , you can also feel the increase in power , , thanks for dropping in john

John, I like both of your mills. The small one looks like it would be easier for a one man operation. Thanks, Dave

@fricknjeep

Жыл бұрын

hi there it is , john

Thanks for sharing, always enjoy stopping by.

@fricknjeep

Жыл бұрын

hi there always glad when you stop in john

Nice job John 👏 Thanks for sharing 👍

@fricknjeep

Жыл бұрын

hi bit slow on the big mill , thanks john

Nice to see the big saw running

@fricknjeep

Жыл бұрын

hi there it still has a long way to go . glad you stopped by john

Nice to see new mill good luck!!!

@fricknjeep

Жыл бұрын

hi there so glad you stopped by and thanks for your support , john

Great video

@fricknjeep

10 күн бұрын

hi there ,glad you liked it , thanks for stopping in john

More Refinement Needed. Be Careful. Yes,,,I Hope To See You Again. 🙀😬🤕👍

@fricknjeep

3 ай бұрын

hi there tonight's video is sawing on this mill ,but before the roller work . thanks for dropping in john

I think You should Build a table top, In front side of the Blade, So wood cant drop down, Near it. 1/2 From It, Just thinking of your safety.

@fricknjeep

5 ай бұрын

hi there just haven't gotten there you . i guess like the one on the other mill . john

Nice log John!

@fricknjeep

Жыл бұрын

hi there i think it was one of yours , john

Screaming jimmy detroit? Definitely sounds like a Detroit for sure

@fricknjeep

3 ай бұрын

hi there good ear 671 , john

good video and job. you need waynes crew that's a lot of work for one man. take care, be safe and well.

@fricknjeep

Жыл бұрын

hi there that sure would be nice , thanks for dropping in john

Awesome content. Thanks for sharing

@fricknjeep

8 ай бұрын

hi there there are alot of old good ones , thanks for dropping in john

Awesome....love your videos...I have learned a lot from you John....just got an 01 Frick....gonna be bringing it home soon and resurrecting it....

John thought I saw a log turner. Sure would help with those bigger ones

@fricknjeep

Жыл бұрын

hi there there are 2 , just haven't got there yet , thanks john

That is a very nice big mill.

@fricknjeep

6 ай бұрын

hi there lots of work but coming along slow , thanks for stopping in john

John you need to get rid of the log rack so that way you could drive in with your loader and put the directly on to the mill , the you could turn the log when you need to with the loader and chain

@fricknjeep

Жыл бұрын

hi there there is a place to do that , john

Good to see the big mill operate. Why not put some boards over the jack shaft as Timothy suggested?

@fricknjeep

Жыл бұрын

hi just haven't got there yet . john

Thanx, man that’s a huge feed works

good to see the bid saw running , was wondering if you are going to put some boards down where the cuts drop

@fricknjeep

Жыл бұрын

hi there wasn't planning on it but seams like they may help . thanks for dropping in john

What are you going to do if that blade flies off and cuts you in half.

I'm not a sawyer but since you're alone, it seems that it would be easier to flop it down (forward) and slide it back. Bill

@fricknjeep

Жыл бұрын

hi there haven't figured it out witch is easier , or best yet john

I lost a buddy one year back in the 80’s he had s mill like this and fell on the blade. His son was standing right there. Sad. Be careful.

@fricknjeep

2 ай бұрын

hi there very sad , thank you for bring it ,john

@shanehumphrey4827

2 ай бұрын

@@fricknjeep you are welcome

Sounds like a dirty ol Detroit, love it! Kinda terrifying though that thing would kill you dead if you are not paying attention

@fricknjeep

Жыл бұрын

hi there , you are right , kind of like driving down the road . glad you stopped in . thanks john

Nice job 👍

@fricknjeep

Жыл бұрын

hi there good to see you dropped in john

3rd generation sawyer here. This is a more primitive version of the mill we used for twenty years. I spent the whole video cringing at how dangerous everything here is. I can’t believe he’s doing any of this! Do not try this at home.

@fricknjeep

9 сағат бұрын

hi there i think you are right , things are alot more advance now , but done this way for over 100 years / thanks for dropping in john

Amazing

@fricknjeep

4 ай бұрын

hi there well coming along slowly.So glad you dropped in and liked it and then took your time and left a comment , Thank you John

👍👍

@fricknjeep

Жыл бұрын

thanks john

looks like you had your work cut out for you on this one

@fricknjeep

8 ай бұрын

hi there yep , think i need the top saw on next , thanks john

John, you need a chewy, instead of all the other stuff you buy.

@jamesb9564

Жыл бұрын

He’s Got 2

@fricknjeep

Жыл бұрын

hi there there are 2 of them , come hook them up for me , would tomorrow work . john

@art1muz13

Жыл бұрын

@@fricknjeep See you tomorrow!

Definitely need a offbearing table,i can see you eating a short slab

Hey john im watching your show, have a question what does the top saw do?

@fricknjeep

8 ай бұрын

hi there it makes it easier to brake down bigger logs , john

@patrickkuntz5103

8 ай бұрын

Ok i think i understand that it also cuts the top of the log so you don't have to turn it into a stopsign gotcha

@fricknjeep

8 ай бұрын

yep thats it john

scary backing out with a plank still attached ,, yikes

That’s a big log

@fricknjeep

Жыл бұрын

hi there thanks for dropping in john

Dam that was a mite sketchy I'd say. Mr John might I ask why you don't have a conveyor belt that carries the drop piece away, are at least a few boards for the drop to land on instead of just an opening over your jack shafts? Sure seems to be a lot safer than the way it's setup now. Just wondering, and you know better than I do, but the way that came off then collapsed onto the roller, and it appeared at first it was going to spring back into you, but fortunately it held on long enough for the rest of it to give it enough push to keep it going forward PS I was watching young fella down in Mississippi the other day, and everytime he needed to turn his logs. He'd hung a electric wench from the joist, and he'd take cable with under the log then using a can't hook attached to the end of cable he'd drive the hook into the log at different places depending on how far he was wanting to turn it. As long as the timber, and shear weight of the log on the carriage, it be advantages to hang two different winches from the reinforced beams I'd install wherever it felt they should be. They've got nice winches that have wireless controllers, so that you could run them independently of the other, are have them sync together in order to have better control over the logs turning. Might be worth looking into the something like that, and for little money and effort it'd surely make it a hellogalot safer for one man army such as yourself

@fricknjeep

Жыл бұрын

hi now lets just think on what you have written , conveyor may run 10 k to 20k for a new set up installed . .the opening is the way Frick designed it . so keeping in mind i am still putting this together , then the winch in the rafters , would you really winch a 3000 pound off them , they were made for a load from the top not a pull from the bottom . then once again there is a cost factor , you must be a multi millionaire . all your ideas are great and i am glad you brought them , john

yes! just whack it 😛😛

@fricknjeep

Жыл бұрын

hi there , some times i get out there , glad you stopped in john

I got too bored WHAT AM I DOING!!!!!!!

@fricknjeep

Жыл бұрын

hi i understand , but everything here is in real uncut time , still glad you dropped in , thanks john

why would anyone make a vidio of a mill that does not work

@fricknjeep

6 ай бұрын

hi there i dont understand your comment , but thanks john

Boring

@fricknjeep

4 ай бұрын

hi there sorry but your 1 video ,well what can i say , thanks for dropping in john

Poorly though out video.

@fricknjeep

6 ай бұрын

hi there i dont think them out at all . i turn the camera on and wing it , later i will go watch some of your videos and learn how to make them better , thanks for the help . john