I've been searching KZread reviews on moving heads and this is by far the best video yet for review and operation. Thanks Steve!

@LearnLizard

2 ай бұрын

Very much appreciate your kind words!

Definitely one of your best videos!🤟 Well done!!

@LearnLizard

2 жыл бұрын

Thanks so much for those words of encouragement. Much appreciated and thanks for watching!

Very informative. Thanks for the video.

@LearnLizard

2 жыл бұрын

Glad it was helpful and appreciate you watching!

Because of this video and excellent review! I decided to buy 4 pieces

@LearnLizard

Жыл бұрын

Excellent! I think you are going to like them.

Love your videos

@LearnLizard

2 жыл бұрын

Thanks so much and really appreciate you watching!

Always a good video.

@LearnLizard

2 жыл бұрын

Much appreciated and thanks for watching this one!

Great video 👍🏼

@LearnLizard

2 жыл бұрын

Thanks very much!

Nice light steve great video

@LearnLizard

Жыл бұрын

Appreciate you watching this one!

I ready order 2 tomorrow I'm gonna used whit my dmx 3.0 thanks for the video is amazing

@LearnLizard

Жыл бұрын

Excellent! I think you are going to be happy with your light show 🙂

Nice vidéo ! Just for info, the blue power connector is called PowerCON, Neutrik is the brand ;)

@LearnLizard

2 жыл бұрын

Thanks for that correction. I honestly always thought the connector was called a Neutrik --but now I know (thanks to you) Appreciate you watching!

@bobletben8212

2 жыл бұрын

@@LearnLizard Neutrik also make xlr and dmx connectors for cables and patch panels

Great video. How would these perform on 6 foot totems for wedding and event DJing? Do they tilt down enough? Would the 7R 230s be a better choice? Thx.

@LearnLizard

Жыл бұрын

Hi- Unfortunately neither of these tilt down far enough to have the beam hit the dance floor if it is close to a 6' totem. The 7R 230 is way bigger and heavier too- Probably bigger than what you would want to lug to smaller gigs. Appreciate you watching.

You shuld do a video on how to prigram these lights or controll them without a dmx cable I guess I'm not really sure

@LearnLizard

2 жыл бұрын

Hi- You can definitely set up simple functions using the menu controls but to really get the most effective results you need to use a DMX cable and some kind of DMX controller. Thanks for watching!

Love your videos you should review a chauvet intimidator

@LearnLizard

2 жыл бұрын

Thanks for the kind words. I'd LOVE to do a review on a Chauvet Intimidator Spot 360 if I could get my hands on one!

@matlightfxproductions

2 жыл бұрын

@@LearnLizard that be amazing be sure to check eBay

@matlightfxproductions

2 жыл бұрын

@@LearnLizard I own a intimidator spot 255 and it is my top favorite moving head ever. you should check it out as well

@croissantproductions

2 жыл бұрын

@@LearnLizard It’d be worth it. The quality of a Chauvet or ADJ product is miles better than this Shehds light

@frankorandle

Жыл бұрын

@@croissantproductions The price difference is also miles apart. Having controlled a very well known lighting showroom in the Midwest through the 1990's selling ADJ product I know the difference between ADJ and Shehd. It's not the product, it's the price. It is pretty much all made in the same Chinese factories other than an occasional ADJ fixture made in Germany. You are paying for the name and an established customer service with ADJ. You end up paying 2 to 4 times the price for very similar product. The current and past CEO's of ADJ know who I am as does the corporate director of sales Brad and their head tech Ernie. I do have a thing for their Show Designer 512 channel controller but I can control 1,024 channels with a controller that only costs $300.00 new.

Quick question: I programmed my Ayra ERO 706 movinghead on the Ayra OSO 240B MKII dmx controller and trying to run it in music mode, however it never runs the entire program (it stays on the right and never reaches the left) due to the beat it picks-up i guess? Should I program more steps in the chase?

@LearnLizard

2 жыл бұрын

Hi - So I'm assuming you have your fixture in DMX mode (not show mode) and a chase programmed on the controller that you are running in "sound active mode"? Does the full chase (all scenes) run when the chase is manually activated? Have you tried setting your fade time to 0? Also, there is a setting on this controller which allows you to affect only the pan & tilt channels for a fade. I would make sure this is off to help troubleshoot. If everything works perfectly in manual mode, I'm guessing that the mic in the controller is not picking up all the transients in the music. Unfortunately there is no mic sensitivity control on this unit that I am aware of. Hope that helps and you get everything working the way you want!

Have you found any software-based DMX controllers (iPad, Android, MacOS or Windows) that EASILY allow for manual selection of defined channel ranges? For example, in this video some of the gobo channels have multiple discrete ranges for things like individual selection, rotation direction and speed, shake, etc. I have some laser units that have similar controls, and I’ve yet to find a software package that lets me QUICKLY and ACCURATELY move to a specific range or exact value then make micro adjustments from there. Ideally such software would also allow me to define these ranges and/or values with labels, so that I could access without having to cross reference or memorize a lookup table.

@LearnLizard

2 жыл бұрын

There are so many software controllers I'm guessing that feature exists somewhere. I'm mostly using Vibrio on the iPad because its so simple to set up and use. With it you can type in any value below the fader and it will jump to it. Its quick and accurate and you can micro adjust from that starting point. There are no labels but that would be a great feature!

@QuicksilverSG

2 жыл бұрын

Check out the ADJ/Wolfmix WMX1 stand-alone DMX controller. It's a compact, customizable controller with a 4x5 grid of dynamically-labeled, illuminated buttons, combined with built-in color, motion, and beam effects generators. With a downloaded or custom fixture profile, it will automatically assign a fixture group's DMX gobo selection ranges to any column of buttons you prefer (up to 10 selections per column). You can do the same with customized colors and pan/tilt positions for up to eight separate groups of fixtures.

Thanks mam

@LearnLizard

2 жыл бұрын

Thanks for watching!

Can you do a review of the shehds 18x18w led par

@LearnLizard

2 жыл бұрын

Thanks for that suggestion. I'll keep that in mind for a future video. Appreciate you watching!

Great video. Whats the fixture model?

@LearnLizard

2 жыл бұрын

Thanks! Model# SHE-SpMH100W-6BMEU Here's a direct link: www.shehds.com/products/6-prism-led-spot-100w-gobo-lights-with-aperture-with-lcd-display-stage-effect-lighting-dj-disco-stage-moving-head-lights-stage-dj-lighting-617

Do you offer any one on one mentoring? I need help setting up my lights. I’ve watched videos but can’t get it to work. I’m doing something wrong.

@LearnLizard

2 жыл бұрын

Hi- sorry I can’t do one on one help (I’m only doing this part time as a hobby) but if you can describe what’s going on (or not going on haha) here in the comments I’ll do my best to help. Appreciate you watching!

Being new to DMX the biggest question that I have, can you wirelessly use one connector to control LED, pars, and Goboes on the same controller? And if so, can you make a video of doing that?

@LearnLizard

5 ай бұрын

Yes you can definitely do that. Here's a video that basically shows you how: kzread.info/dash/bejne/gox8j9psn9XOodo.html

Your videos are ace! But just want to say that nuetrik is the brand that's a powercon

@LearnLizard

2 жыл бұрын

Thanks very much for that correction- I never knew that. Appreciate you watching!

@kayakingdj

2 жыл бұрын

You're most welcome! I've learned an awful lot from your videos! So thank you!

Why is it I am left unsure of the exact nsme and model number. When I searched I found more than one 100 watt gobo units.

@LearnLizard

Жыл бұрын

Hi- this link should take you there- thanks! www.shehds.com/products/6-prism-led-spot-100w-gobo-lights-with-aperture-with-lcd-display-stage-effect-lighting-dj-disco-stage-moving-head-lights-stage-dj-lighting-617

Use the ADJ Focuspot 3Z with Airstream DMX

@LearnLizard

Жыл бұрын

Yeah, I'd like to do a video on the ADJ Airstream. I'm learning myDMX 3 right now and will probably do a video on that first. Thanks for watching...

Big gobo lamps type????

What's the best way to protect your lights from rain if you're doing a gig outside

@LearnLizard

2 жыл бұрын

Electronic equipment (lights included) doesn't like moisture. Even if they survive the initial exposure, problems can crop up later due to corroded connectors or components. But if you have to do the gig you can set up a pop-up canopy and keep all your gear underneath if its not windy or raining too hard. I've also put trash bags over audio gear in a few situations, but I wouldn't recommend that with lights because of the heat they can generate. Good luck and stay dry!

@AidasPa

Жыл бұрын

rain covers lol

Steve, That’s an awesome light. Much better than my Equinox Fusion Spot MK2. Great video. 😍 How much is this and I need to look them up if they are available in the UK 🇬🇧. 🙏🏼

@LearnLizard

2 жыл бұрын

Appreciate the kind words! You can buy it directly from Shehds for $339 USD (in the US with free shipping) I'm not sure how much in the UK but I believe Shehds ships there to. Thanks for watching 🙂

@marcoavila9086

2 жыл бұрын

@@LearnLizard what’s the best dmx controller for my beam230 7R do you recommend elation magic260?

@AidasPa

Жыл бұрын

@@marcoavila9086 invest in a console; or at least a dmx->usb node and learn some software like avolites or chamsys

Can you do the poker pro head moving

@LearnLizard

2 жыл бұрын

Hi- do you mean the ADJ pocket pro?

Can these gobo wheels replaced?

@LearnLizard

10 ай бұрын

I think it might be possible but not easily -- unless you are quite technically inclined. I researched it a while back and might try making a video if I'm feel brave some day.

Do the smaller ones have pan and tilt reverse?

@LearnLizard

Жыл бұрын

Yes- In the menu controls "Pint" (enter yes or no) reverses the pan and "tint" reverses the tilt. Appreciate you watching!

@gemtachataj6119

Жыл бұрын

@@LearnLizard thank youuu!

You got Shehds products too? I guess it is popular now.

@LearnLizard

2 жыл бұрын

Shehds makes a good variety of products with more professional features while still keeping their prices quite reasonable.

@CHGOfficial512

2 жыл бұрын

I have bought the USB-dmx great device for small space

Can i use ir por The mini beam

@LearnLizard

2 жыл бұрын

Hi- I'm not sure what you are asking? Are you asking if the mini beam has IR (Infra Red) control? It does not. You would need to use DMX. Appreciate you watching!

Does it have sound active and master/slave function?

@LearnLizard

2 жыл бұрын

Yep- It has both (as well as a couple of auto modes)

Hey Steve, what's the price on tho gobo

@LearnLizard

Жыл бұрын

Right now they are $186.15 with free shipping to the US on the Shehds website: www.shehds.com/products/6-prism-led-spot-100w-gobo-lights-with-aperture-with-lcd-display-stage-effect-lighting-dj-disco-stage-moving-head-lights-stage-dj-lighting-617

Can I use this moving head whit dmx 3.0 American dj

@LearnLizard

Жыл бұрын

Do you mean MyDMX 3.0 Software? Yes, but you might have to make your own profile. (which is pretty easy) It will work with any DMX controller.

@rafaelandrade9724

Жыл бұрын

@@LearnLizard yes I ready have it actually I use 4 pocket pro adj but this one has prism and more to show

Can you answer my question please: why is Shehds lighting so popular right now?

@marcoavila9086

2 жыл бұрын

Shehds made really good products and low prices 2 they have warehouse in USA you can have the product asap

@CHGOfficial512

2 жыл бұрын

​@@marcoavila9086 thanks

@croissantproductions

2 жыл бұрын

It’s because they are sending products to people to review.

Please i am in GHANA and how do I get one

@LearnLizard

Жыл бұрын

Hello to Ghana! Check the the Shehds website (link below) to confirm which countries they ship to and thanks for watching.

I would highly doubt that’s a neutrik connector, it’s likely a generic Powercon. Neutrik is a brand that sells xlr, Powercon, trueone etc. connectors. If it was a neutrik connector they would probably put it in their specs.

@LearnLizard

5 ай бұрын

Yeah, I'm sure you are right. When I made this video I didn't realize Neutrix was a brand name for a Powercon connector. Thanks for fact checking me.

Just an FYI: The prism in the light is called a 6-facet prism. The Chinese companies like Shehds can never get their English right 😂 hence why they call it a 6-prism or whatever

@LearnLizard

2 жыл бұрын

Oh- I didn't realize that. Appreciate the clarification. (I really learn a lot from viewers comments like yours) Thanks for watching!

@croissantproductions

2 жыл бұрын

@@LearnLizard No problem. I enjoy your content a lot!

Dang, I could have bought 4 of these for what I paid for 1 Chauvet Intimidator.

@LearnLizard

Жыл бұрын

Chauvet makes great products, but it's really hard to beat Shehds prices. (and so far so good with the performance- although I'm not running them 24/7)

@croissantproductions

Жыл бұрын

The Intimidators will last longer and perform better though!