Go watch more of our videos for 74 CAMARO content

That sound take me immediatly to my youth, those cold mornings, when my dad was hurrying up to take their children in time to school!

@rustbeltbuilds

2 жыл бұрын

Holding onto that memory is the most important thing

@jumpinjojo

Жыл бұрын

*Immediately

@mrg52u11

4 ай бұрын

@@jumpinjojothink it was flooded a little?

@Thebumpinthenight

4 ай бұрын

My pops had a 68 c20 with a 327 and side pipes before the rear tire. I was the coolest kid at school

very nice, love the cranking, love that old Mopar sound.

Just so the world knows, big cams and compression saves lives 👍👍 Awesome sounding truck bro 👍

@patgraeme775

Жыл бұрын

A handful of timing saves starters

Starters on mopars always sound like a dolphin in a headlock

@Timmermon63

3 ай бұрын

That’s the best description of a Chrysler starter ever!

@JohnWhite-xc3md

2 ай бұрын

Not when they're running right. My 440, and 340 Magnums would fire immediately. To be fair, I never let them sit for two weeks. All the Mopars I ever owned, or my parents cars started without hesitation. They chryslers from '65 to about '73 were excellent. Never had any real problems. My Mom's Cadillac? Totally different story.

@elijah2078

2 ай бұрын

I will say that most of the old gm starters sounds like a coffee can full of rocks. They are also the only ones that needs shimming and usually destroys flywheels.

I love this video! The sound of that Mopar starter is tremendous!

@rustbeltbuilds

3 жыл бұрын

We have an Instagram- rustbeltbuilds

@lovetocrank

3 жыл бұрын

How about email? I am at lovetocrank@yahoo.com

@RbaTmaR420

2 жыл бұрын

Yeah you cannot mistake the sound of them old mopar starters. He could buy a high torque and slap it rite on there. But love he stayed with the old school.

@mopardude707

Жыл бұрын

Same here bud I love my 96 ram I love the way it sounds when cranking 👍

@lovetocrank

Жыл бұрын

That has a great sound, I agree! Do you like it when you have to crank it over a couple of times before it starts?

Just so you know, the 318 four barrel and the 360 four barrel, with TQ carbs both came with 800 cfm carbs, so I don't believe an 850-cfm carb on that engine with that cam is too large. I run a 750 cfm on my 360 with smog heads a performer cam and intake and stock exhaust manifolds, it was basically dead with a smaller carb on it. An electric fuel pump so you could fill your carb with gas after it has been sitting will save you from cranking so long to get fuel to your carb and save your starter as well. Awesome sounding engine, great exhaust system, I missed the burnout, or at least I was hoping to see one.

Sounds great! I had a 1978 ford truck with a 351M and a cam and head work done to it. Takes me back to firing it up on a cold morning

Cool truck. I have a 74. I used to think they were ugly until I got one. Now I see the beauty in them.

@wesleynash2598

2 жыл бұрын

I just got a 1975 Dodge d300 dually and I want it to sound like this!

Tune that carb. Look up uncle Tony's garage on here. He has carb tuning videos that will remove the hesitation from the 850.

Starter works 🤣 Sounds awesome bud , my engine turns awhile to from setting especially with an edelbrock.

This video is addicting. I find myself watching it every week. It sounds so good.

@rustbeltbuilds

Жыл бұрын

The Camaro on our channel sounds better!!

If it's not timing it sounds like the only thing he needs is an electric fuel pump to prime the engine. This thing sounds beautiful! I'm just getting my 78 D150 running after buying it last October...I'm going to cam and put aluminum heads on it with a 750cfm carb.

@rustbeltbuilds

3 жыл бұрын

It has an electric pump wired up but it’s not hooked to fuel tank

Had to show the pistol. Lol thought you were from Texas til I saw that for sale

Nothing like mopar tech. I enjoyed my supercharged 5.9. Of course it didn’t last but it was one hell of a truck

I was a running a Delphi mechanical fuel and a barrel style fuel filter like you have in your 360. I changed out the Delphi for a Carter.. No difference. I changed out the barrel filter for a slim glass one and boy that made a difference in start up. If you’re running a Glycerin filled fuel pressure gauge make sure you cut the tiny nipple off the rubber plug on top. It helps the heat escape for a accurate fuel reading! Those 360s detonate and get hot quick if fuel starved. Beautiful truck and sounds awesome!

Something we used to do back in the day was prevent the engine from starting until oil pressure built to minimum, usually 20 psi. Cool video man. I just like old-school engines with thumpy camshafts

@rustbeltbuilds

Жыл бұрын

Check out our recent videos!!

@MrRatkilr

9 ай бұрын

Starting in neutral helps the torqueflite trans last longer. Imo

Neighborhood loves this guy

Now THAT is a big aggressive sound...even for small block 360. I have same engine, but with a 20-602-9 cam for towing. The idle ain't that aggressive.

Yeah, I'll bet all of your neighbors LOVE that.

That idle sounds wicked! Nope, don't want to see a Stoopid tire roasting burnout - been done to death. With that cam I want to hear a straight up 20 to 100 pull.

@rustbeltbuilds

2 жыл бұрын

Will do

Sounds great buddy!

My God in heaven 🔥🔥🔥🔥🔥🔥 nothing sounds more amazing.

@rustbeltbuilds

Жыл бұрын

Check out our Camaro cold start

Awesome sound!!! 🤟🏻

Sounds wonderful

Damn that thing sounds awesome.

Sounds amazing 😍💓💓

Sounds really good 👍

@rustbeltbuilds

Жыл бұрын

The Camaro on our channel sounds better

Love that sound, mine takes about as long to start, You feather the pedal? I just stomp on it once in mine to set the choke. Could get a good shave in before itll catch😂

More big cam cold starts on the channel!!!

@teacatstudios3236

2 жыл бұрын

How much?

@brianszempruch8353

2 жыл бұрын

How much are you asking for it?

I could dance to that rhythm! 😍

That sounds awesome 😊

That sounds amazing

Nice truck bro. I have a 1990 D 150 all original except the paint I painted its Satin black.

Sounds healthy👍

Sweet soundin mopar!!

780cfm vac, max 👍😊 for that combo & that's a touch big.

If all cars and trucks were made like that and sounded like that they’d be no war in the world.

Very nice idle chop

Sounds great

There's no such thing as a carburetor that's too big. Only engines that are too small! 😎👍🏁

I love small block Mopar

@68chargercrazy

3 жыл бұрын

The 318 mopar has fewer factory returns than any other engine built in the USA

sounds pretty damn good !!!

@rustbeltbuilds

Жыл бұрын

Check out our Camaro!!

Wow just oldskool😊😊😊this is Last call💪

I wanna click Like, but it's on 360!! Consider this your like! Correction: Consider this the Love! I love it!

Potato cam engaged lol

@rustbeltbuilds

Жыл бұрын

We have big cam Camaro cold start as well

fires right up

Sweet rig

Nice truck

@rustbeltbuilds

Жыл бұрын

Check out our recent videos

Slow start, strong finish

Hell Yeah... Cousin phuck Yeah!

Definitely to big carb, & cam. A motor that I would have built when I was 13.

OMG !! I put a 68 trani in my r&r for that grani gear hole shot. .

Badass

I hate the fact that my neighbor has to wake up at 5:30am and come home at 6:15am. I'm not sure what engine and exhaust he has in that Dakota Sport Magnum 4-door but it does sound beautifully, throaty but not too obnoxiously loud. Could even be a stock exhaust with a perfect leak somewhere. It actually sounds very good even though it wakes me twice in 45 minutes. I wonder what he's doing every morning?

Wish I knew what cam this is to put in my truck. Sounds great

@rustbeltbuilds

Жыл бұрын

Not sure if specs or part number anymore

MERICA! 🇺🇸

Love it ❤

Hi mate, what throttle cable are you running? I need one exactly the same for my A body with the same QFT carb and throttle bracket

Sweat truck it looks clean no rust or any big dents. dawn dodge starter always sounds week even when there new. Like the rims 👌👍✌️💯🥂

@vicdevdanjoh5928

2 жыл бұрын

Get a starter from a second gen dodge with a 318 or 360...there half the size and turnover a million times faster...just put on from a 98 in my 83

@josephsaucedo8691

2 жыл бұрын

@@vicdevdanjoh5928 thanks for the tip I have a 84 ramcharger and 76 power wagon, 67sports fury 👍👌✌️💯🥂 it's Mopar or no car

@vicdevdanjoh5928

2 жыл бұрын

@@josephsaucedo8691 hell yeah brother mopar or no car...in currently putting a built 440 big block mopar in a 84 ford Broncos 2 lol...should be 500hp when it's done

@josephsaucedo8691

2 жыл бұрын

@@vicdevdanjoh5928 I wish my 67 sports fury Had 500hp that would be one sweat 6 pack. Good stuff have a great one till the next one 👍👌✌️🥂💯

@vicdevdanjoh5928

2 жыл бұрын

@@josephsaucedo8691 check out bearded boggers on KZread to see my 84 power wagon...keep the rubberside down buddy have a good one

My van needs that cam

Gotta love the old dodges

@lovetocrank

Жыл бұрын

Love the sound of the starters!

Sounds good what cam are you running

there's a reason we run a double carb spring. But awesome

Sound real good 💪🏻

This is thing is high strung.

My first car was a 1976 W200 with open pipe. It didn’t sound as wild, more like a tug boat with the original 318, but it was a flat black work truck not unlike this one.

My friend, you need a high torque starter from the magnum engines. Best swap you’ll do for a cam that big lol

@rlutzmec4290

3 жыл бұрын

It has one

@throttleblipsntwistedgrips1992

3 жыл бұрын

360s just take that long to start. Brand new Edelbrock 650 and stock cam in mine and it takes a couple seconds before itll catch. Longer if it's hot out and boils the fuel out of the bowls.

@brandonpurple8938

2 жыл бұрын

@@throttleblipsntwistedgrips1992 my Magnum 360 starts right up the right fueling and a good starter it should fire up I had a 86 c10 with a 350 with a 4 barrel and it basically would start right up

@tl5108

2 жыл бұрын

A lot of has to do where the initial timing is set

@roachcoachhelis6387

Жыл бұрын

@@tl5108 he said it had been setting for 2 weeks any carbureted engine cranks for a while after setting that long my 350 Chevy sure does

Oooh she bad!!

I have a quick question about getting your Truck on to a great start in the morning...??.. I think a Remote Transmitter Function Starter unit would work well for you.. Jus my thoughts and two cents..

sounds like a whiplash cam

It's playing hot for teacher and Lagrange all at the same time

Love that cam! What compression does that work out to with the police heads?

@rustbeltbuilds

2 жыл бұрын

Somewhere around 9.1 I’d guess

mopars finest

Wish my 75 D300 souned like his 😍

My goodness sounds a band performance

what brand and type of cam did you put on it?

God I love this

My too like it the sound

What cam love the sound

Sandin Racing Hermosillo Sonora México 👍

Super 10's vertical

Sounds like a boat

Hey what kind of cam if you dont mind me ask

bad ass. i bet you are not invited to neighborhood cookouts.

Please make more cold starts! Next time show us what you’re doing inside the cab - the whole procedure. What you do with the gas pedal, etc. Subscribed!

@rustbeltbuilds

3 жыл бұрын

Absolutely! Thanks for the comment

@gearhead9943

3 жыл бұрын

@@rustbeltbuilds can’t wait! Love carbureted cold starts

Nice cam any clue on what it is

What cam is that? I want my 75 d300 to sound exact to this

The cam is at least the 284 Purple shaft. It may even be bigger…

@rustbeltbuilds

2 жыл бұрын

Bingo

Gotta love mechanical fuel pumps.

Don't know what I like better, the idle or the wheel gun on the seat.

A 600 Holley carburetor would have been big enough for that 360 I know I've been there done that

@rustbeltbuilds

2 жыл бұрын

Indeed

What is the tire size that you got on this truck to get this stance?

@rustbeltbuilds

Жыл бұрын

I cannot remember. I think they were atleast 28inch front and rear maybe 29 in the rear

who else hears beautiful people from this cam?

@UG_Viper

2 жыл бұрын

referring to the part where he is at the engine bay

@rustbeltbuilds

2 жыл бұрын

Someone commented the same thing!!

So many hot heads already in the comments telling him how to enjoy HIS car. lol Awesome 360, I have one in my 64 valiant and love hearing how you have this set up

@rustbeltbuilds

3 жыл бұрын

Thanks! Love valiants!

@leotomma3494

3 жыл бұрын

And these hot heads down know what they're talking about

@throttleblipsntwistedgrips1992

2 жыл бұрын

Nobody's really telling him how to enjoy his car everybody simply telling him that his carb is too big, which it is. Even a cam with over .500 lift and 250 duration won't require more than a 750, LA heads are just that restrictive. Even with a 340 or magnum head swap and headers you still have a 1.6-1.9 inch exhaust valve to compete with as well as very small ports.

@kiyoshi8657

2 жыл бұрын

@@throttleblipsntwistedgrips1992 awesome reply and neat info!

@thebaldseagul1009

Жыл бұрын

You arent out of the dmv area are you. There was a badass repurposed valiant taxi with a loud ass motor. Ive been trying to buy that off that guy

Skip to 1:55.

what pipes are these??

What cam is this!

What cam exists that would produce a similar sounding idle for these engines? I'm building one for the first time and don't know what I should look for

@rustbeltbuilds

Жыл бұрын

If you scroll through the comments on this video I think I listed the cam for this engine

Which one "pops" louder, That thing on the seat or those pipes on the side?

@rustbeltbuilds

2 жыл бұрын

Definitely the pipes, check out the dodge burnout video for proof lol