I'm a new CNC owner adding a CNC to my existing vinyl sign biz. Your video hit me like angels from heaven! Exactly what I need for my biz! My table is 3x5' so I plan on a Ritter Board just a wee bit bigger so I have enough room to create a glue-up that can fill my table. Anyway...being as I'm in the vinyl sign biz, there is a waste product that should "Wake Up" any woodworker here sick of getting glue all over everything. Vinyl comes on a roll, in my case 54". The vinyl is attached to "Carrier Paper" which is ultimately completely discarded. Rolls are 150' long. That's a heck of a lot of waste but it is what it is. One side is paper-like but the other side is shiny and very slick! It's very tough. Makes an excellent drop cloth. It could be used for templates or construction paper. Nothing sticks to the shiney side! Not even the vinyl! Here's the deal.....I give it away! It's waste...Like saw dust to a CNC'r. So ... All you woodworkers looking for free drop cloths and a product to keep glue from sticking to your tools and table, go to your local vinyl sign shop. If you pay money you've paid too much.

@StonerEricson

5 ай бұрын

Man best idea ever I could use that every day in my shop thanks for the comment and thanks for watching means a lot I work hard on these videos and it’s great when they’re helpful to someone 👍

I'm just getting started in woodworking so I don't have a lot of clamps yet. And since I'm on a budget and still want/need a lot of other tools, one of these would free up a bunch of that clamp money for other things. I'd imagine this is also very useful for when you need to clamp things from multiple directions and keep it all square.

@StonerEricson

Жыл бұрын

Yeah it definitely would I built mine when I only had a few clamps came in very handy and I would only buy clamps when they were on sale or if I really needed larger ones for specific projects. Thanks for watching by the way happy Woodworking to you.

I could see this useful in my workflow for certain things I’ve done. Super cool video!

@StonerEricson

Жыл бұрын

Sweet thanks for the nice comment happy woodworking to ya

Kick Ass Clamp Clickin Fun! Bad to the bone bro!

@StonerEricson

Жыл бұрын

Thanks man truly is on the coolest things in my shop

Great clamping idea. I am going to start building smaller projects and this concept is smart. I have several push toggle clamps I think I just found a good use for instead of air clamps. I like the air clamps but wedges & toggle clamps will work for me as well. Thanks for the video, keep up the good work.

@StonerEricson

Жыл бұрын

Awesome the toggle clamps is a great idea. The wedges work fantastic too. Thanks for watching. It means a lot. Happy Woodworking 👍

So cool I want one in my shop

@StonerEricson

Жыл бұрын

Make one do it and do it now hahaha happy woodworking

where have you been. lol .I like the system.

@StonerEricson

Жыл бұрын

Haha I’ve been everywhere lately it seems but Im back

add a till at the bottom, removable, to hold the wedges , a couple of clamps, glue bottle, hook for a rag.

@StonerEricson

9 ай бұрын

Nice, great idea happy Woodworking

Bad ass clamping station..!

@StonerEricson

5 ай бұрын

Thanks man I use so much

That is a cool idea .

@StonerEricson

4 ай бұрын

Thanks it work great too

Construction pine and walnut. That’s an interesting combo. What’s the clamping force of those pneumatic clamps?

@StonerEricson

Жыл бұрын

Yeah, it is a weird combo the clamps are in the link in the video. You can get all the specs there. Thanks for the comment means a lot. Happy Woodworking.

Neat !!

@StonerEricson

10 ай бұрын

That’s k for watching 👍

The hose kit you have listed is for a 12mm hose. Just fyi.

@StonerEricson

Ай бұрын

Oh thanks

Hi, Any chance you can show the backside of the pneumatic clamps? How your dowel is attached? Also, what size hole? Thank you.

@StonerEricson

13 күн бұрын

If you look in the comments, there’s some shorts about all that you can watch those and I’ll tell you everything thanks for watching

Very Nice system, can you expand on how you fastened the pegs to the clamps? thanks in advance.

@StonerEricson

Жыл бұрын

With a 1.25 inch dowel, and it wood screw there’s pre-drilled screws in the clamps I use a little CA glue to hold it there then just per drilled a the hole in the dowel and then just screwed it in thanks for watching by the way means a lot

@StonerEricson

Ай бұрын

kzread.infoWf0rtsVap5g?si=nQdLQlAw8ujU0ZSx

Great video and a great system. A couple of questions - is it just a single 3/4" thick sheet of plywood? Also what size holes you recommend & can you please show how those holding blocks are made - guess there is a dowel on the underside. Looking forward to building something similar. Became a subscriber.

@StonerEricson

Жыл бұрын

Yes it is one piece of plywood . I used 1 1/4 inch holes and 1 1/4 inch dowel I will make a fallow up video this week to answer your questions thanks for the sub means a lot 👍 if you build one you will love it

@ashokmoghe8035

Жыл бұрын

@@StonerEricson thank you very much. Yes I think a detailed build video will be a hit. Good luck and thanks again.

I know this has been up on youtube awhile but I just found it. Very good content except: The easy stuff that is obvious is covered while the mod to the clamps to snap in the holes on the Ritter board. Is it dowels screwed on? Sure would help to know.

@StonerEricson

8 ай бұрын

I will make a short about it 👍

that push stick looks judgy 😅

@StonerEricson

4 ай бұрын

Hahah nice

how are the clamps mounted to the back or that board? I assume a round pin is screwed onto them. I will have to think this over I am in the process of designing pneumatic bar clapes that hang on a french cleat and can fold out to mount a panel and then fold flat on the wall, I am planning on using unistrut to make the clamps. But I do like this a lot. You got a like and sub from me anyway.

@StonerEricson

Ай бұрын

Yeah, there’s a dowel with a screw through it. I have a short video on that as well. Thanks for watching. By the way means a lot. Happy Woodworking to you.

great info! how are you making the pnematic clamps stay? are there round pegs glued to the backs of them?

@StonerEricson

Ай бұрын

Yes, I made a short showing how I attached them. It’s in the rest of the comments below I love this thing. It’s all my favorite things in the shop, but I get this question all the time so it’s the round pegs with CA glue and a one and five agent screw running through the screw in the automatic clamp all of the products I use for the pneumatics are in the link in the description of the video so you can just order it directly off Amazon

@StonerEricson

Ай бұрын

kzread.infoWf0rtsVap5g?si=nQdLQlAw8ujU0ZSx

Nice. What and how did you mount any pegs to the bottom of these aluminum pressure cylinders?? I really trying to make one for myself. Thank you!!

@untiground

2 ай бұрын

--- Upd. I’ve found an answer in previous posts. Thanks

@StonerEricson

2 ай бұрын

kzread.infoWf0rtsVap5g?si=X6dGfv0qReYHGFkf

@StonerEricson

2 ай бұрын

Man I’m so sorry here’s is a link to a short I just made for you hope it helps

Where did you buy those pneumatic clamps? Please share thank you.

@StonerEricson

2 ай бұрын

There’s a link to them in the description of the video. Thanks for watching.

do you just epoxy glue the pegs to the Pneumatic clamps ?

@StonerEricson

10 ай бұрын

Yes JB weld

I must have missed Izzy's video on the small camping system, but I did see one where he made a GIANT clamping board. ;) What did you make to attach to the back of the clamps to secure them into the dog holes?

@StonerEricson

9 ай бұрын

I just use JB weld epoxy thanks for watching means alot happy woodworking 👍

Man, i fear for your hands on that table saw !!!!

@StonerEricson

4 ай бұрын

Thanks

@jvmiller1995

Ай бұрын

Are you going to come and wipe his ass for him too. My God you people kill me!!!!

How many pneumatic clamp can you connect to the switch ?

@StonerEricson

Ай бұрын

As many as you want and all depends on what your air compressor is set at

@rkamgar

Ай бұрын

@@StonerEricson thank you I guess I just need more splitters then. So for three clamps I would need to split each port to three line

@StonerEricson

Ай бұрын

A splitter would work or you can get a switch that has multiple ports

@rkamgar

Ай бұрын

@@StonerEricson the only switch I found was that 5 way 2 position. Do you know of any switch for more than 1 port for double acting rod. Thanks

@StonerEricson

Ай бұрын

No I have never looks the way I have mine set up is the way I like it sorry

Great job . Love your presentation style and energy ! But please wear some EYE protection. Using all those power tools with no eye protection is like rolling a dice . You’re an influencer . Use that to help prevent blindness. Students learn good habits from teachers, and unfortunately they do the same with bad habits. In a split second, a chip or debris can literally blind you forever. Keep up the great content.

@StonerEricson

6 ай бұрын

Will do great comment thanks good looking out 👍