I agree. RRW is paying attention to the factory wheels and specs to come up with logical alternatives. I'm getting a set soon for my 4Runner build, but for 285s and an Icon lift. Good luck with your build.

@project4runner271

3 жыл бұрын

Thanks you too!

Dig it man! Just bougjt a 2013 trail but so confused on wheel and tire size. This vid helped!

@haikudragon1002

3 жыл бұрын

Same! I have an 04 4th gen, I'm trying 2 figure out between toyo open country A/T and Nitto Ridge Grapplers, but want my 35s sticking out. Had no idea when ur buying wheels there's offset as well. 🤕🤯

I just got 285/ 70 /17 mickey Thompson with raceline bronze 17.8.5 wheels 0 offset. with a three inch lift to be installed soon . I I was real worried about the offset look , but your video straightened me out. They'll sit perfectly flush. I have the Trd pro 4Runner so the front bumper is trimmed at the factory. It won't rub because of the lift and factory trim also I'm getting spc upper control arms fully adjustable so I can move the wheels if needed and get perfect camber and cast. Great video nice wheels too

@project4runner271

2 жыл бұрын

Great! I just last week installed 3/2 lift also 285/70 K02’s. I just need to trim the front-side plastic a little. It only rubs in reverse at full lock with small bump.

Hey man. I went with the RRW too. Not here yet. Can't wait. Thanks for the suggestion.

Perfect for my liking..!! Thanks for the great video

Happy birds in your neighborhood! Great looking tires and wheels!

Sweet ride and wheels!!!

I cannot wait to get a 5th gen 4runner 😎 hopefully get it before summer

@project4runner271

4 жыл бұрын

Good luck my friend. You’ll love it!!

Looks good!

I would have never really looked twice at the wheels but once they are in the truck they look nice.

Perfect! 👍 I’m getting these exact ones for my ‘05 4-Runner. 0 offset as well. There on backorder though, I’ll be waiting a bit. * update: 6 months later and they’re here! I went with stock tire size 265/65/17 With the wider rim and zero offset, and no plans on lifting, it looks perfect! They’re not too popular here in Michigan, that I can tell, and they’re not blingy at all so most likely not on the criminal’s radar. I also got Gorilla lug nuts to deter thieves a little. Best looking wheels I’ve ever seen!

Dope wheels! I think you got it just right as far as the offset. I have a 2016 trail with stock wheels and upgraded to 275 without problem.

@kfow34

3 жыл бұрын

What wheel width on the 2016

@alvaritoxxx01

2 жыл бұрын

Hi Catalla, i'm about to get a new set of tires and i would like to get 275. I've an stock SR5 with black matenTRD Pro Wheels. In your experience, if i put the 275 with stock suspension will i experience some rubbing??

@ltatjsallday8709

Жыл бұрын

This fool "project 4runner" suck at responding to people ??????

Those are really nice rims!!

Nice setup. Nothing to worry about. Clean and simple. I will as what your height is with the roof rails. I'm worried about my garage door.

@project4runner271

4 жыл бұрын

Thanks! I’m anxiously awaiting a powdercoated aluminum roof rack and Ladder from Greenlane off-road.

Looks great

Ordering mine now in -12. Thanks for the video. Would have loved to seen these outside in the light more.

@project4runner271

4 жыл бұрын

Thanks for watching! These are the best looking Wheels I’ve seen on 4Runner. They look even better in the sunlight. Congratulations on ordering yours. I am anxiously awaiting a full roof rack and ladder in powder coated aluminum from Greenlane off-road. Check back in a few weeks should have a video up of the new rack!

@jllineros

4 жыл бұрын

hi, did you have any problems with -12 offset? do you have a lift kit?

@patreesheo

4 жыл бұрын

@@jllineros I installed the 2.5" Bilstein kit. I trimmed the bumper with a dremel, pushed the liners in and still have some rubbing on passenger side full turn sometimes. Could be the Cooper ST Maxx 285/70/17 tires... Highly recommend the offset, wheels look great. If you dont want to trim the fenders, go with a smaller tire? I will get around to trimming the last bit, but to be completely honest, NOBODY will ever notice a half inch shave under the bumper.

@K_oa

4 жыл бұрын

@@patreesheo Did you get a UCA with the kit? Or was just only the suspension? How is the clearance issues now?

@patreesheo

4 жыл бұрын

@@K_oa No UCA. Since the Bilstein's have a ring you can adjust in 4 slots which determines how much lift you get out of the front. Initially I had set it to to the third ring (2" lift i think). After the rub issues, I had to do it all over again and adjust to the 4th slot (full 2.5" lift) and now that its done, I am glad I did it. What was making me nervous was the truck only had 600 miles on it when I did all this. The passenger liner is a little more.. bulky(?) than the driver side so you have to trim a bit more. Once I got over cutting up a new truck it was fine. Ha! If I could do it all over again, I would go -12 again. All day. Good luck with yours!!

I'm going to try to get into the same vehicle. Trying to get out of the full size and go further down dirt roads and better parking at the mall.

I got the same but with -12offset and 285/70/17s. Man I think it is the cleanest looking wheel for these 5th gens. With the -12, stick out is barely noticeable but I don’t regret it at all. Looks super aggressive and very clean.

@project4runner271

4 жыл бұрын

Nice! How’s is the clearance with your wheel/Tire setup? What lift did you go with?

@s302jzget

4 жыл бұрын

@@project4runner271 bilstein 6112 front with bilstein 5160 rear About 2.75 front and 2.0 rear. Did have to do BMC and bumper trim.

@K_oa

4 жыл бұрын

@@s302jzget you needed a bmc? wouldnt it just be a fender liner mod and mud flap removal?

@s302jzget

4 жыл бұрын

@@K_oa On mine, it still rubbed at rear at full lock. I couldve moved it a bit more forward with the SPC UCA but that means more cutting on the front fender and I didnt want to do that because only so much can be cut out of the fender before it starts looking noticeable. For me I prefer the BMC because its hidden plus youre able to keep factory caster settings. I know some guys likes more caster but I tried 4 degrees and I hated the way it steers.

@martinjernberg4184

2 жыл бұрын

do you have photos? im looking at doing the same on my silver 4runner but on the fence!

Those are sick.

After 1 year...how the tires feel on-road? noise levels? mpg?

Beautiful Runner

Man you got birds in your garage😂 Like the wheels👍

I love that Sticker

Getting those wheels too but for my Rav4 2021 hybrid in grey. Do you think gun metal would suit better than black wheels on dark grey RAV4? Thanks in advance!

did you find with the zero offset it threw any rocks up on the side of the 4runner?

Looks good.

Hey man great looking 4Runner!! I went with the same wheels on my 4Runner as well but in matte black. So no rubbing at full lock? I'm running stock tire size with general grabber atx's and have a 1.75" lift and still get some minor rubbing only at full lock though.

@project4runner271

4 жыл бұрын

Hey thanks. I don’t have any rubbing that I am aware of. Are yours also 0 offset? I bet your wheels look sick in matte black!

Do you have any side shots showing the vehicle in some light ? I’m about to pull the trigger on these EXACT wheels lol same color and everything but I’m concerned about the color of gunmetal in the sun ?

I actually ordered Method wheels 17" x 8.5"/0 Offset matched with Toyo Open Country AT3 tires from Tire Rack. I also drive a white 4Runner SR5 Premium.

@project4runner271

3 жыл бұрын

I am considering the AT3’s for my next tires!

@pierre-richardromain6708

3 жыл бұрын

@@project4runner271 I can't wait to see how they ride. I'm also considering lifting the front suspension to level the truck. I'll ask my local Toyota dealership because I don't want my warranty to be voided.

@pierre-richardromain6708

2 жыл бұрын

@@project4runner271 I got my wheels installed 3 days ago. They're 17" x 8.5" with a 0 offset. I purchased the Method Racing wheels matched with the Toyo Open Country AT3 tires. I love the ride so far.

@project4runner271

2 жыл бұрын

@@pierre-richardromain6708 Awesome!

i went with the fn fx pro wheels, same dimensions as yours except about 2 lbs lighter for each wheel, i go off roading once or twice a week but still wanted some better gas mileage

@project4runner271

4 жыл бұрын

Nice! Which tires are you running?

@project4runner271

4 жыл бұрын

I checked them out. I guess mine are a 1/2 inch wider that must be the 2 lbs lol. Cheers Bro!

@joserenteria1713

Жыл бұрын

Hello Preston, I'm looking to get he same wheels as you. Is there a place I can follow you so I can see your set up?

I bought my first 1995 Toyota 4runner..im going with stock tiers..or what the manufacturers recommend. Micky Thomson from Wal-Mart $217.99 each (not cheap)

Any idea how these would look with -12 offset same size tires without lift

I got a set of the limited all gloss black with -12 offset and 285s. Nicest wheels for tacos and 4Rs imo

@project4runner271

2 жыл бұрын

Congratulations! Sounds Sick.

I just purchased a white 4Runner SR5 Premium. I love it! Down the road, I want to switch the factory tires but keep the factory wheels. I'm looking into the Pirelli on/off-road tires. :)

@project4runner271

3 жыл бұрын

Nice! Congratulations on your purchase.

@pierre-richardromain6708

3 жыл бұрын

@@project4runner271 In regards to your video, did you add the BF Goodrich with stock height?

@project4runner271

3 жыл бұрын

@@pierre-richardromain6708 Yes, stock height

@pierre-richardromain6708

3 жыл бұрын

@@project4runner271 No rubbing?

That old will look good on my truck

is it safe even the Tire are spread because of the wide Rims 8.5"?

Anyone know if the stock 265/70 wheels would rub if you get these wheels with the -12 offset. I don’t have a lift right now but might get it done in the future. Thanks

@project4runner271

Жыл бұрын

It will rub. If you turn to full lock and look at clearance the -12 with 8.5” wide wheels will add 1 1/2 inches to the outside edge of your stock setup

Love the wheels Will 275/70/17 on these wheels fit a 19 TRD off-road p? I wanna go 275

@project4runner271

5 жыл бұрын

Might get a slight rub. Should look great!

I have a white sr5p and I went with a vision nemesis rim, they are also gun metal. They have -12 offset and I have them on 275/70/17 ko2s. The front rubs just barely on sharp turns.

@project4runner271

5 жыл бұрын

Cool, so maybe a small spacer or lift and you’ll be good. Good to know! Do you still have the mudflaps intact?

@project4runner271

5 жыл бұрын

Jeremy that’s a good tire size that you put on there. I wish it came in C rated. I only have stock size Ko2’s on mine and the first set I got were E rated and I was never quite happy with them. I recently traded them in toward a set of the C rated stock size and I’m much more happy. I even had them swap out the spare with the Ko2 looks nice under there. Maybe someday I will get the 285’s in the C. Cheers

@lcatalla7292

4 жыл бұрын

@@project4runner271 I'd like to hear your thoughts after 285's upgrade.

@project4runner271

4 жыл бұрын

l catalla Right! I need to decide on which lift kit to go with before all that. Unfortunately I ruptured my Achilles’ tendon a couple months ago and 4RUNNER had to be put on pause 😔 Thanks for watching and contributing!

@lcatalla7292

4 жыл бұрын

@@project4runner271 sorry to hear, hope you're recovering well.

Great stuff buddy. Can you advise what is the model year of your 4Runner? I am in the market for a limited edition, I just wonder if those wheels will do well on the Limited and if the ride confort would be jeopardized. Thanks a lot

@project4runner271

3 жыл бұрын

2018 TRD off-road premium. It shouldn’t change the ride much at all and it will add 2 inches to the overall stance. I’m assuming if anything it will make it more stable with a wider stance.

Are the center caps included or did you have to add on the the purchase?

trying to buy these rims. Is "RR5-S 17x8.5 (6x5.5 / 6x139.7) HUB-CENTRIC / Toyota Spec" The model you purchased? Thanks for the help

@project4runner271

4 жыл бұрын

Yes 0 offset!! Enjoy

Those are super sexy, I did the ProComp Vertigo wheels with -6, I find the style is pretty similar to yours.

@cdesrae1212

4 жыл бұрын

guitarguy092 any rubbing issues with your tire/wheel setup?

@RCGJR_

3 жыл бұрын

Any rubbing with negative off set?

@guitarguy764

3 жыл бұрын

@@RCGJR_ it did not rub combined with my 3" lift from OME. Once I put on JBA high caster UCAs it did rub a little but I got the alignment shop to push to 4.0 and 4.1 degrees of caster and it stopped rubbing. I refused to take off my mud flaps.

@RCGJR_

3 жыл бұрын

@@guitarguy764 oh you got a lift, i was asking from a stock owner 😂 i guess 0 for me, no lift just yet, just in the near future.

@guitarguy764

3 жыл бұрын

@@RCGJR_ My tires are 285/70r17 (32.7") so thats a big reason for the rubbing. With stock wheel size it still might work for you.

wheel and tires it cost for the set?

I have installed 30mm wheel spacers after a 2 inch suspension lift on Prado. The wheels are still stock. I have 3 options. Should I get -12 offset and remove spacers? Or Keep spacers with stock wheels Or Get -12 offset and let the wheel spacers be there..

@project4runner271

2 жыл бұрын

Go -12 offset with no spacers! Maybe -25 if you want. To Me spacers create a weak link also rough on bearings. Good Luck!

Looks killer

I want to buy those exact wheels and tires for my 2021 runner. I want to know exactly what you have

@project4runner271

3 жыл бұрын

www.relationsracewheels.com/collections/toyota-4runner/products/rr5-s-17x8-5-6x5-5-tacoma-4runner Looks like they are sold out! Stock size Bf Goodrich K02 tires though

So you went completely oem size on wheels too get this look because that's my problem I don't want to change anything and I was gonna go a -12mm offset but now I'm worried it will rub. Have to say I do love that color too I have a salsa red and that color would look great on mine.

@project4runner271

2 жыл бұрын

My stance is actually 2 inches wider than stock, 1 inch per side. If you go with a -12 with the same backspacing that I have your stance will be closer to 3 inches wider, 1 1/2 inches per side. If you turn your steering wheel to full lock in one direction you can see where adding 1 1/2 inches will leave you.

Looks sick

Nice build I have a Tacoma and I like those stock wheels u took off the 4 runner do u know how wide they are

@project4runner271

5 жыл бұрын

17x7.5

nice floor fan. nice wheels too! lol

Would the stock TRD pro 17 rims fit without rubing on stock tires?

@project4runner271

4 жыл бұрын

Yes

Nice

Where did you find those wheels I looked them up on their website and and can’t find them?

@project4runner271

3 жыл бұрын

www.relationsracewheels.com/collections/toyota-4runner/products/rr5-s-17x8-5-6x5-5-tacoma-4runner

Nice car ! Now go for exhaust

@project4runner271

4 жыл бұрын

Thanks, It’s had a Gibson cat-back for almost a year😎

We're you able to swap the stock TPMS sensors over to the new RRW wheels?

@project4runner271

Жыл бұрын

Yes

Im confuse which to get. I like a little bit of offset, but is it bad?

@project4runner271

3 жыл бұрын

Toyota did not intend for the 4Runner to have very big tires and a large negative offset. That being said I think that the zero offset is perfect.

Good morning Rusty! I’m curious to know if those gunmetal wheels appear lighter in the video than in person. What’s your opinion? I also have a white 4runner and interested in gunmetal or matte black.

@project4runner271

Жыл бұрын

They may look a tad bit lighter in the video because of the lighting. I definitely recommend the gunmetal no regrets here!!! Good Luck!

Nice set up. I got a 2016 4runner limited. Would these fit without any rub?

@project4runner271

3 жыл бұрын

Yes as long as you keep the stock tire size on.

narrow tires perform better in most offroad situations. wider is kind of a stance/look trend and good in sand and stuff, thats about it

@darthtyranus7683

3 жыл бұрын

True i run 285 wide in these TX sands they do just fine since the 4runner doesn't weigh a whole lot either

Race Relations in seriously bringing some heat to the wheel market. They putting out some solid products. Did you recently buy these? They website always says sold out. Atleast as of late.

@project4runner271

5 жыл бұрын

Chris G Just installed within the last couple weeks. I guess you just have to catch them when they get a new shipment in, or maybe pre-buy. Thanks for the comment.

If you get the -12 offset would it rub

@project4runner271

4 жыл бұрын

I believe you are right my friend. I think I made the right choice getting the zero offset.

RRW wheels are so dam popular theres a 6/8 week waiting lists to get your wheels

But the fact that they are not flush is actually the cool factor!

So it looks like the 265 -12 offset would be flash.. sweet rims though Im stickin to 265 too

@project4runner271

3 жыл бұрын

The -12 would look great but you’d at least have to remove mud flaps even with stock size all terrains. With level kit or more lift you might be ok though.

What about sr5 I think trd front are higher than sr5?

@project4runner271

4 жыл бұрын

Trd Pro is 1” higher up front. Trd off-road is same as sr5. Thanks

I am looking at this exact setup. Looks great. Do you have any lift or is it stock?

@project4runner271

2 жыл бұрын

Not lifted in video. I am currently picking out a lift.

@teddynaicker2997

2 жыл бұрын

@@project4runner271 thanks for the video bud. Am looking to go for the same wheel specs with stock size tires. Icon rebound wheels with 8.5 width and 0 offset, only the BS is 4.75 . Stock 2018 Sr5 and hoping it Not to rub. Any inputs regarding rubbing, just don't wanna trim any plastic and things. Thanks.

@project4runner271

2 жыл бұрын

@@teddynaicker2997 You’ll be fine! Mudflaps and all.

whats the load rate on the tire c, e???

@project4runner271

3 жыл бұрын

Not sure you’ll have to check their website.

What type of Tire are you running with these and how is the sound on the road

@project4runner271

4 жыл бұрын

Bf Goodrich KO2 (265/70/17) Definitely a little bit of road noise but not bad for such an aggressive tread. Toyo just came out with a new all-terrain tire the open country AT3. They might be one step better than the BF good rich KO2 tires from what I’ve read.

Does this set up work with a 2003??

@project4runner271

4 жыл бұрын

I am pretty positive it does. I would email RRW get their contact info from their website. Good Luck!

Is everything with the suspension stock? Truck looks great! Just trying to figure out what it would take to get a trd off road stock to look like this.

@project4runner271

4 жыл бұрын

Stock suspension, Stock size BF Goodrich K02, and these ☝🏼wheels in the zero offset. Also get the badging blackout kit from amazon(it seems expensive but it is totally worth it) best $70 I’ve spent. Hope that helps!

@project4runner271

4 жыл бұрын

Also don’t forget the Gibson Catback exhaust with the big, black tip 😂

@ryancasey9185

4 жыл бұрын

@@project4runner271 Haha that's fantastic. Thanks for the reply!

so would the -12 offset have rubbed?

@project4runner271

5 жыл бұрын

For sure, even with stock tire size.

Nice Ride! I noticed in your video that you said you went 1" wider than stock (7.5" to 8.5"). Everything I see online says the stock TRD wheel width is 7" , making 1" wider, and 8.0" install. I'm on the cusp of ordering wheels & tires for a 2022, based on yours looking perfect. If you could confirm the 8.5", that would be much appreciated. thanks !

@project4runner271

2 жыл бұрын

I believe that the TRD pro wheels are actually only 7 inches wide. At the same time the TRD off-road wheels which were the stock on mine were 7.5. These are definitely 8.5 that I put on though/ with 0 offset. Sorry about the delay in the reply.

@DavidRamirez-fe5dd

2 жыл бұрын

I measured my trd pro wheels and they are closer to 8 inches. I've heard on forums they are 7.7 inches dunno. I'm just reading my tape measure and is reading well past 7.7 inches and I measured my new 8.5inch rims and they measure closer to 9 inches. very confusing. There must be a offset measuring point or something going on.

@project4runner271

2 жыл бұрын

@@DavidRamirez-fe5dd I have never actually measured them with a tape I just trusted the documentation on them. You probably need to measure to the insides of the beads not the outsides.

Did you have to lift or do anything suspension wise to fit these wheels or did you just have to switch them on no problems?

@project4runner271

4 жыл бұрын

No lift yet! Just swap them out. The -12 offset would probably rub though without modifications.

@TheHondaracingpower

4 жыл бұрын

@@project4runner271 nice thanks man. By the way im not sure if you mentioned it but what tires are you running

@project4runner271

4 жыл бұрын

125ccMotoVlogger 265/70/17 stock size but K02.

@TheHondaracingpower

4 жыл бұрын

@@project4runner271 thanks man

They are the best looking wheels on the market

@project4runner271

4 жыл бұрын

Thanks, and thanks for watching.

What lug nut brand did you go for your new wheels

@project4runner271

4 жыл бұрын

Sorry don’t remember what brand. I didn’t know that the stock wouldn’t work until I took to my local shop and they ordered some got within a day. Just double check the size on RRW website and if they’re sold out hunt down that size elsewhere. Good luck!

@tuoitreomaha9096

3 жыл бұрын

Any update?

What size are your tires? 17in or 20in?

@project4runner271

3 жыл бұрын

265/70/17 (stock size)

At 8.5 wide with 0 offset, wouldn't they be a 4.75 bs? I know factory is 4.50. Stance looks nice.

@project4runner271

4 жыл бұрын

Not sure, if I remember correctly backspacing these were the same as the factory wheels.

@rich1958

4 жыл бұрын

Factory has a different offset

Rusty...I love these wheels RRW is sold out but I have found some on Ebay...with 28 offset...what does this mean

@project4runner271

4 жыл бұрын

Not sure. I only know of them coming in zero or -12 offset. Are they the 17”x8.5” size with six Lugs?

@project4runner271

4 жыл бұрын

Dude I just went on their website needs exact wheels are in stock and ready to ship. www.relationsracewheels.com/collections/rr5-s-17x8-5/products/rr5-s-17x8-5-6x5-5-2019-ford-ranger?variant=31977520595026

@project4runner271

4 жыл бұрын

For some reason that link that I gave you is for the Ford Ranger wheels but I am pretty sure that the 4Runner ones are in stock and ready to ship. Good luck!

@mylesfolger

4 жыл бұрын

Project 4Runner ...Rusty...would the Ford wheel work on the 4Runner...the 4runner wheels are sold out on 0.0 off set....

@project4runner271

4 жыл бұрын

Myles Folger I don’t think so. Have you tried emailing RRW?If I recall they were pretty good about getting back quickly. Good luck!

Hey, I’m looking for a set of the rims you took off. Do you want to sell them?

@project4runner271

2 жыл бұрын

I wouldn’t sell them for much less than you can find brand new online. Then Shipping is expensive. Good luck!

@luisbriceno5237

2 жыл бұрын

Alright, cool. I think you are in Florida and I’m in Florida, I just thought we could do something. Thank you

What is the link to the website to purchase these rims? And what is the name of the rims? Thanks in advance

@project4runner271

4 жыл бұрын

www.relationsracewheels.com/ RR5 is the Model Name

@vincentthegreat82

4 жыл бұрын

@@project4runner271 awesome thanks

So you're running 265 size tire for that AT. My question is are you running a lift? If not then thats dope.

@project4runner271

4 жыл бұрын

No Lift yet. Thanks

@andyham6094

4 жыл бұрын

265 are stock size. You should be fine running any kind of 265 tire on a 4runner.

@mongoslade2325

3 жыл бұрын

Ahh man choo

@andresmorera1118

3 жыл бұрын

What about tire size 275 will it rub?

That is one loud ass bird. What is the wheel size on those rims? 265/65/17?

@project4runner271

4 жыл бұрын

Lol Stock tire size

@project4runner271

4 жыл бұрын

Gantry Crane 265/70/17

Would LOVE these wheels and color for my white 2020 TRD off Road premium... but $2400.00 for a set damn that is pricey as hell... If you know where I can get them a lot cheaper let me know... Thank you. Are these T/A K02 tires C-rated or E-rated for load?

@project4runner271

3 жыл бұрын

They were a lot cheaper when I bought them because they weren’t forged back then. I really want the forged ones but that is a lot of money. My tires are C rated. Take care

Do you still have your old wheels? wanna get rid of them? I'm interested.

@project4runner271

4 жыл бұрын

I do have them, they’re in perfect condition.

@project4runner271

4 жыл бұрын

I would consider selling them. Where are you located?

@anthonyszeto5508

4 жыл бұрын

Project 4Runner I’m located in Texas.

@project4runner271

4 жыл бұрын

Anthony Szeto I’m in Florida, not sure how we would even broker the deal. Also I wouldn’t part with them for less than $500. Cheers to Texas though I was born in Houston!!!

@anthonyszeto5508

4 жыл бұрын

@@project4runner271 Okay, I would pass on it. with shipping it may push over more than I would like to spend. Same here! GO TEXANS! hahha. I do appreciate your time.

Look very nice, I try to order but so out :(

@project4runner271

4 жыл бұрын

Damn! Good luck

Just ordered the same wheel in all black for my 2020 ORP 4R, did you buy longer lug nuts ?

@project4runner271

3 жыл бұрын

The stock Lugnuts definitely won’t work. I don’t remember the ones that you need but they are somewhere in this comment section

@project4runner271

3 жыл бұрын

You can find the lugs on the RRW website although usually sold out

@tycotoys

3 жыл бұрын

I ordered these … 12X1.5 EXTENDED THREAD / ET (SET OF 24) As per note on RRW website * It's a known issue that the Tacoma, 4Runner, and GX have short wheel studs. Upgrading to aftermarket wheels causes the lug seating to change to a conical seating, which then results in less thread engagement than what the factory wheels and lug nuts can obtain. The solution is to use our compatible ET (extended thread) lug nuts. The shank of the lug nuts fit snugly into the wheel's lughole, resulting in more thread engagement and a better peace of mind.

@project4runner271

3 жыл бұрын

How do they look?!

@tycotoys

3 жыл бұрын

@@project4runner271 Don’t have them yet, waiting for Fed Ex to deliver.

So you did no lift on them or anything to get them to fit without rub?

@project4runner271

3 жыл бұрын

No lift and no rub. It’s close though at full turn.

@SnIpErBoY1264

3 жыл бұрын

Thank you. I’m gonna get rn same rims I think I really like them, what are the tires?

@project4runner271

3 жыл бұрын

@@SnIpErBoY1264 just stock size BF K02. If you go bigger than that you will need a lift and possibly to do some trimming also remove the mudflaps on the front.

@SnIpErBoY1264

3 жыл бұрын

@@project4runner271 so stock size as in 265/70/17? Do you think 275 would fit with these wheels or would I rub?

@project4runner271

3 жыл бұрын

@@SnIpErBoY1264 you might be ok. It would definitely rub though if you were at full turn and hit a bump.

I have pro comp rims with Toyo Open country ATs.

@project4runner271

4 жыл бұрын

Very nice, I considered getting those same tires myself still may eventually.

@alexanderestk

4 жыл бұрын

It was a tough call for me but I love the highly aggressive look of the toyos. Rides excellent and I haven’t noticed any increased road noise.

@alexanderestk

4 жыл бұрын

Project 4Runner Oh btw my wheels are 17x8 -12 offset. I had to take off my front mud flaps and trim the fender liner. But it’s worth the aggressive look.

@project4runner271

4 жыл бұрын

Alexander Estk I bet it looks sweet. I can’t wait to get a 3/2 Lift. Then I can consider the 285 c rated tires. The stock size tires aren’t wide enough for my wheels. Still looks good though. Cheers!

Hey guy - did you sell your old wheels?

@project4runner271

4 жыл бұрын

Not yet!

I don't get the all black trend to be honest. In most colors they look weird. Gun metal is the best color in my opinion . Great looking wheels!

@project4runner271

2 жыл бұрын

Thanks, agreed!

Nice set up bro. Simple and clean. I have a 2019 Toyota Hilux 4x4 G here in Philippines ang im planning to buy BF KO2. Whats the performance regarding your usage of your KO2 in terms of Fuel efficiency, road noise and off road capability? Thanks bro.

@project4runner271

4 жыл бұрын

Fuel Efficiency wasn’t noticeably affected( I do have the lighter C-rated k02’s). Road noise is not bad at all. They’re also good off-road.( I’ve really only used them in sand). Cheers Bro,I’m jealous we don’t have Hilux here in US.

Hey, so I have a 2019 SR5 and want to keep the stock size 265/70/17 but go with 17x9 wheel with -12mm. Sounds like you think that will rub? If so, do you think it will be significant and require some trimming or a level? I kinda want to level it anyway.

@project4runner271

4 жыл бұрын

First of all I think those wheels being 9” are too wide for the stock size tire.My stock size KO2’s don’t work with anything wider than the 8.5” wide I have them on. So The wheels that you are talking about are a full half inch wider than mine. I am also pretty sure that the Wheels I have on maintain the stock backspacing which is another thing to consider. So I would definitely check in with the manufacture of the wheels you are considering or find a review or something before you pull the trigger. All of that being said my vehicle at full turn has less than a half inch of clearance from the plastic. also make sure that you are getting hub centric wheels. Thanks

@shawnwood1297

4 жыл бұрын

Project 4Runner Thanks for the info. I didn’t mention, I’m going with a Nitto Tire, not the actual stock tires. Just same stock size. Thanks again.

@shawnwood1297

4 жыл бұрын

Hey, while I’m bugging you. I’m thinking about getting a set of Toytec Coil Springs. Toytec recommended the springs over spacers, saying the springs lift the front about 1.6 inches and actually level it. They said the spacers leave the front higher than the back. Whatcha think? Thanks.

@project4runner271

4 жыл бұрын

Shawn Wood From what I’ve read if you lift the front 1 inch that levels the frame. If you go any higher the wheel wells may match but the frame is actually higher in the front than the rear. I don’t think it is a big deal but it may have slight adverse effects to your handling. If I wanted to level mine without spending too much money I would consider the spacers. I might be wrong but the way that the geometry works on the front suspension if you add 1/2 inch spacer it actually raises it 1 inch. If you’re looking to spend a little bit more look into the Bilstein shocks that come on the old TRD Pro they will also raise it 1 inch with improved handling. I think after I get some life out of my stock suspension I am going to get a full lift kit and lift the front 3 inches and the rear 2 inches. There’s so many ways that you could go with the suspension it can get really $$$ really fast. It’s also such an important aspect of your vehicles performance. Hope that helps.

@shawnwood1297

4 жыл бұрын

Project 4Runner you’re talking about the adjustable 5100 Bilstein’s?

Great Looking 4Runner. Do these wheels fit the center bore just right or did you require rings. Thank you.

@project4runner271

4 жыл бұрын

They are hub-centric spec’d just for your Toyota 😉

@project4runner271

4 жыл бұрын

I believe that they also specify when you’re choosing options on your wheels. Hope that helps!

@howardlee7216

4 жыл бұрын

Project 4Runner , thank you for the reply. Did you get them right from the RRW website?

@project4runner271

4 жыл бұрын

Howard Lee Yes, no middle man pretty good price. I believe it was free shipping also I couldn’t believe the price I got them for.

@howardlee7216

4 жыл бұрын

Project 4Runner, thank you for the reply. I will check them out.

Why did they tell you it will look flush when your intention was to have them stick out?

@project4runner271

4 жыл бұрын

I didn’t want them to stick out. If I wanted them out further I would’ve gotten the -12mm offset. I got the 0 offset. I’m thinking on a Tacoma they probably sit out further.

@leerx7015

4 жыл бұрын

@@project4runner271 so if they're sticking out with 0 offset, would the 12mm still work with no rubbing issues?

@project4runner271

4 жыл бұрын

Lee rX If you watched the video I actually put a straight edge to show you guys that they are a half inch in from the fender flare. I also stated that they were as close as you could be without rubbing with stock size tires. So I am assuming if they would have been the -12 mm offset which equates to almost a half inch further out that they would rub.

@leerx7015

4 жыл бұрын

@@project4runner271 Got it, thanks!

Hey Rusty, I ordered those exact same wheels after watching your video here. So thanks ! The wheels just delivered yesterday and I’m having them installed this weekend. Help a brother out - Which exact lug nuts did you buy, and where did you buy them from? I need to pick these same ones up, but need to know brand & size (part # if you have it would be awesome!). Thanks for your help & advice !

@project4runner271

3 жыл бұрын

I had mine installed at discount tire. They had to next day air order some for me so I really don’t know. Once I have time today I will try to track down the proper size and specs for you just by searching online.

@MattZilla0713

3 жыл бұрын

Project 4Runner thanks man! Yea, if you find the particulars please let me know. I can’t find any that work perfectly.

@project4runner271

3 жыл бұрын

Matthew Elkins they are 12mm x 1.5 , I just did a quick search on Amazon and there are several. Don’t go with the cheap ones and also read in the reviews and make sure that they are fitting on 4Runner but I checked a few reviews and that’s the size.

@MattZilla0713

3 жыл бұрын

Project 4Runner thanks Rusty! I saw that also, and the variations of diameter/length are throwing me off. I’m trying to find out how long the ones on your truck are, and their diameter too. Evidently, some of the reviews stated they bought them and they ended up being too short for aftermarket wheels. There’s also “spline” option lugs. I bought these and many of them arrived with rusted threads and several were chipped/flaking. Definitely sent me used lugs 👎🏻

@MattZilla0713

3 жыл бұрын

Project 4Runner well crap. Couldn’t attach a photo McGard 64015 in black is what I purchased on amazon. Dimensions were 1.45” overall length. 3/4” hex. Conical, and 12x1.5 thread size, of course.

Nice build, would this work with a regular sr5?

@project4runner271

4 жыл бұрын

Absolutely!

@CorbyIzTrill

4 жыл бұрын

@@project4runner271 Hey man, are you sure the rims aren't RR5-(F). On their website, the RR5-S doesn't come with a (0) offset?

@project4runner271

4 жыл бұрын

CorbyIzTrill that’s the new version which are forged(very nice)

@CorbyIzTrill

4 жыл бұрын

@@project4runner271 Awesome! I was hoping I could bypass the forged ones and get the regular RR5-S. Very helpful man. Keep up the videos

@project4runner271

4 жыл бұрын

CorbyIzTrill I’m actually considering upgrading to the forged myself. They are a little bit lighter and maybe more stout.

Any leveling kit on it?

@project4runner271

4 жыл бұрын

No, going to wait and do a proper 3” front/ 2” rear full suspension upgrade soon. Thanks for watching.

@marklamse3261

4 жыл бұрын

What lift kit are you gonna go with

Thanks for the info....you lost me w that frump sticker though

@project4runner271

4 жыл бұрын

Just curious here. What does a so called freedom fighter have against Trump?

@freedomfighter2911

4 жыл бұрын

Project 4Runner if you don’t hate frump, then you missed the point and are part of the problem

@project4runner271

4 жыл бұрын

freedom fighter Great explanation. I guess that you are on this side of the embedded politicians for life that have made millions off the backs of us Americans.

Damn, that thing looks so good. Except that bird shit on your side windows. ;)