Best wheel and tire set up for the UDI / sg1603 and up platform. Tamiya M chassis is the answer!
link to 12mm hex to make these wheels work right:
Traxxas 12mm Hex Wheel Hubs w/Axle Pins (4) [TRA7154] - AMain Hobbies
www.amainhobbies.com/traxxas-...
Best Ebay seller for Tamiya M chassis rims link:
www.ebay.com/itm/Tamiya-Mini-...
This link below has a few really awesome options for abs drift tires including different levels of softness:
www.rcmart.com/M-Chassis-Drif...
Nicest drift tires that fit the M chassis rims link:
www.ebay.com/itm/Tamiya-Drift...
link to where I got my white rally n chassis rims:
www.horizonhobby.com/product/...
Now for the Rubber tires!!!
link to inner foams:
kingcobrahobby.com/products/t...
link to Tamiya M Chassis low profile tires part # 50568:
www.walmart.com/ip/50568-M-Ch...
Amazon link to low profile Tamiya M chassis Tires part # 50568:
Check this out on Amazon
TAMIYA 1/10 M-Chassis Radial Front/Rear Tires (2), TAM50568 a.co/d/bAtnmYU
Another link to low profile Tamiya M chassis tires :
www.rcmart.com/
#rccar #1603 #1604 #banggood #rcdrift #kenblock #driftcar #traxxas #hoonigan #10thscalerc #redcat #hpi #mst #toys #hobbywing #hobby #castlecreations #lipobattery
#traxxas #traxxasslash #traxxasrally #RCdrift #RCdriftcar #adamlz #taylorray #RCcar #tamiya #tamiyarccar #kenblock
Пікірлер: 23
Awesome, dude! Thanks for all the tips! 😊 I don't have one of those, but I have a Scy 16302, if I'm not mistaken... It's the same as the JJRC Q117 F. It's an awesome looking car for me to ride on my street, but the rubber tires are a bit too much sleepy... You know? But they are 50mm and it's hard to find them from China. (I'm from Brazil, so it's our only option.) But I'm definitely going to take a look at those! Anyway, stay safe there with your family! 🖖😊
the standard rubber tyres on my 1604 PRO F, are perfectly fine for road use here in the UK. My car already does 30 mph on the totally bog standard ESC and brushless and fanned motor that comes originally with the PRO F car as standard.
Helpful video sir, I actually followed your links and ended up getting some m-chassis wheels and those tires, I'm pretty hyped. The axles are 3mm, but the bore on the M-Chassis wheel is larger... did you swap axles or get some tiny sleeve to go in there?
get those M-series tires on the mini-b too, great tires thanks
@outerzonerc777
Жыл бұрын
Yes. This man knows!
@ckmitchell212
Жыл бұрын
@@outerzonerc777 looking for foams? try gone bananas (brand) the losi mini-t size
Awesome video! Did you upgrade the steering on it too? You seem to have a red steering bellcrank.
@outerzonerc777
Жыл бұрын
Yes. That and I made some adjustable toe links.
Make a video of it on the track
Could i use the Tamiya 60D rally tires? Maybe if i cut the wheel wells? SG1608
@outerzonerc777
Жыл бұрын
Ya they work, I didn't need to trim. I have them on the car now and use on my off-road track
@Hotmale420
Жыл бұрын
@@outerzonerc777 thanks!
I got the same hex nuts and Tamiya M wheels. When I tighten my wheel nuts up the wheels lock tight. Any advice?
@outerzonerc777
Жыл бұрын
You need to put a small neoprene spacer between the wheel hex and the wheel to space it out just a little bit. Watch the video again from 7:50 to 8:30.
@dalelusted3947
Жыл бұрын
@@outerzonerc777 I'm using spacers but hasn't fixed the problem. It's the hex pushing up against the hub when the wheel is tight. I can't put a spacer behind the hex or the pin won't go through the hole. Hope this makes sense?
@outerzonerc777
Жыл бұрын
@@dalelusted3947 When I get home I'll take a look at mine. It's possible I filed down the lip on the hex that goes towards the bearing. I thought they were pretty plug and play. You described your issue well. I'll look into it.
@dalelusted3947
Жыл бұрын
I had to file down the face of the hex so the pin was sitting slightly proud. This has fixed the issue. Thanks for the reply.
@dalelusted3947
Жыл бұрын
@@outerzonerc777 do you find the motor gets way hotter using the bigger wheels now?
Hell ya
@outerzonerc777
Жыл бұрын
🤙