Totally agree ! I've sprayed three sets of cabinets with this product so far and I love it. Amazingly quick dry time, with a beautiful smooth finish. Perfect alternative to laquer.

It looks like you are living your dream and for that I’m super happy for you! Thank you for sharing!

I just painted 8 doors using the brackets you suggested. It was the best. Thanks for the awesome tip. They look great.

This is awesome, the Idaho painter and his crews are phenomenal, I've been painting over 22 years myself and I've made some mistakes afew times in my career, first time I sprayed doors I sagged them big time, well instead of leaving it alone and wet sanding my sags out with a rubber block the next day, I freaked out and grabbed a 6 inch half inch nap weenie roller and for one , put firballs in the doors plus stipple, huge mistake. I never repeated that again. Idaho painter is super pro.

Always loved the 3m advanced masking, it just sticks to the windows itself and then I can just work my way around with tape.

I had to make a cabinet panel a week after a cabinet reface was done at a customers home. Pittsburgh paints is where I found Breakthrough paint. They asked me if I worked for the cabinet reface shop because they were the only ones that use breakthrough paint, they said it’s all they use for cabinets. When I sprayed it on I was super impressed. I don’t spray every day but I do spray projects like once a month to every other month. I can remember laughing after using this paint because I thought it laid out so nice that even a toddler could have good results with it! 😀

Awesome again👍👍👍 Thank you Chris!

Striving for perfection! Thanks 👍

Great vid as usual. Keep em coming.

Break through is an awesome product. Used it on my vinyl windows 5 years ago and still looks brand new.

@Idahopainter

4 жыл бұрын

Good to hear! Thanks for sharing🤙

They look awesome!

Breakthrough is all I use painting furniture... Awesome paint.

Your videos are getting better and better. Keep it up. 👍

I’m the painter for 11 years and every time that I see videos for you I always learn something different there for me and I think you are the best painter in the world

@w1ldcard743

4 жыл бұрын

Nestor Mejia 😂😂😂 yeah ok! ....

Very helpful Chris!

Bad ass clean result!!!

Thank you, thank you! I’m looking for a paint to paint my kitchen cabinets. I’m not a professional and since I don’t have the experience I don’t want to purchase or use a HVLP. I was wavering between buying a Wagner or the Titan airless sprayer. And you just helped me decide, not only on the Titan 410, but also on the PPG paint. Thanks again for your video(s) content!

@bailey2624

4 жыл бұрын

you can spray break through in an hvlp easy its very watery.

@davidbahr9612

3 жыл бұрын

A titan 410 is a hell of a sprayer for a DIY project. A graco magnum line is a fraction of the cost and plenty effective.

I use a Clean Shot Swivel Extension Adapter when using a gun extension to eliminate the back pressure squirts. They're awesome!

I work in a paint store during the day and paint new construction and commercial at night up here in British Columbia. Just discovered this channel, Really enjoying seeing what equipment and tools other guys are using in the rest of the world. Checked out your online store too, great tools and the pricing is good. I see a lot of new products come and go, but it's nice to see a selection of quality products geared for pros, tested by pros. Thanks for the remarkably entertaining vids. Subbed.

@Idahopainter

4 жыл бұрын

Thank you for taking the time to share🤙

@toponemarketing

Жыл бұрын

@@Idahopainter do you ever caulk between the baseboard and the stained hardwood floor in new residential homes? Thank you for the response.

Wish I know this paint 2 weeks ago. Great vid

Liked the video people need more videos on types of paints were to use on different surefaces good job

@chrisnewhouse2615

4 жыл бұрын

The angry Emerald i

Breakthrough is good paint. It seem super easy to work with.

Very professional 👏🏻👏🏻

Ppg breakthrough is an amazing product, drys very fast and hard as a rock! I personally like to use a 208 tip as it runs VERY easily! Nice work!

@hypnotelepaticalexx6521

4 жыл бұрын

THE_FAMILY_MAN_CLAN were I can buy it?

@brianpope7345

4 жыл бұрын

@@hypnotelepaticalexx6521 PPG paint stores

@brianpope7345

4 жыл бұрын

I love this PPG product. I have used it on basement concrete and loved it!

Excellent informative vlog.... Good Job..

Thank you for your time. Thanks for sharing this Video,very interesting.👍

Exelent job

Your videos are awesome thanks for sharing the trade knowledge with us DYI Neanderthals.

*👍🏻💥 I didn't know about the Frog tape,* Thanks for sharing, Merry Christmas, by for now Ken,

@Idahopainter

7 ай бұрын

Same to you!

Also when you spray outside you wanna make sure the wind isn't blowing over 10mph cause the over spray can travel up to a mile. I mention that cause when you was spraying the door I was watching where your over spray was traveling. Also that PPG paint sounds pretty good. I have used PPG paints before just not that one. I would definitely give it a shot. For doors like that I've used Emerald and I like using a 311 tip to spray trim and doors. That's just the way I like to do it. I figure a 6 inch fan is good cause of less over spray. Great job as always.

@bailey2624

4 жыл бұрын

310 works just sprayed a thicker paint and worked

Super Spec Benjamin Moore is thin and works really good.

2 cor 4 7-10 love it , GOD bless you bro

@Idahopainter

3 жыл бұрын

👍

I like your shoes. Didn't see them listed in the tools used on this job section. lol :)

thanks for the tip of standing the doors up with the brackets. I was going to make it way harder than I needed too.

@Idahopainter

10 ай бұрын

Glad I could help!

❤❤❤BREAKTHROUGH 💥😁👍🏻💯

wow, so many steps to paint a door! sure they look good though

@cactusqueen6417

4 жыл бұрын

marcelguarachi perfection takes time!! 😉😉

awesome video Chris! I just did my first batch of doors on a new build and confused low pressure tips with Fine finishing tips. WHOOPS! Cleaning the doors was something I could have done as well.

Good job

Great job lads! Just did something similar in Brisbane

@Idahopainter

Жыл бұрын

nice

Could you please show the whole spraying process every time, we love to see the paint go on and it allows us to better understand the technique, maybe some slow-mo too. Also, could we get a long closeup of the product used every time. Love watching your videos, we need to get you to 1 Million subscribers

Just gotta make a comment, i bought one of the whip hoses and i have to say all you guys watching this need to get one, their so flexible they make gun control so easy, its like your guns not actually attached to anything, sprayed whole 4bed house woodwork out in 2hrs including prep, its just so natural your not fighting the hose like you normally would be, so good i got another because we just cant get whips like this in uk

@Idahopainter

4 жыл бұрын

Thank you for sharing and I glad you are liking it🤙

Do you ever use the stack racks for doors. 4 triangles for each door , you can flip door on floor and stack one on top of other when sprayed. Very handy.

Hi Chris, love your videos. I have four interior doors to paint and thinking of using a Graco Magnum X5 sprayer (my DIY budget limit). Wondering how much paint I might need for those 4 doors. I've also read that the PPG Breakthrough yellows after a while, and wondering whether you've experienced this. I'll have 3-5 more doors to do in the future as well. Thanks!

Thanks for taking the time to share your knowledge. Is there another video in which you show how to get the masking off? Just wondering if you cut it with a blade to prevent the paint from tearing.

Hey Chris, I am starting to adopt a lot of your prep work techniques after years of what I call “ego painting”. 😊 The people that taught me the trade had the philosophy that masking was a no no, etc. I have found that by taking these extra prepping steps I don’t end up “wasting time” as my teachers said and the end result is MUCH better and of course the customer is very happy. The time I spend prepping i get back plus some in being able to work a little faster by not worrying about getting paint on trim or glass, etc. However, to anyone reading this please note that you must calculate the prep material into your bid. Its not much but its good business practice so that you / we aren’t losing money. Also I have learned that when the customer see you / us doing this they have a greater sense of confidence in the work.

@Idahopainter

3 жыл бұрын

Awesome thank you for sharing🤙

@Idahopainter

3 жыл бұрын

Thanks for your support

@ChannelEleven59

3 жыл бұрын

@@Idahopainter one last thing. I picked up one of those 3M maskers and LOVE IT! Ironically it was given to me by the guy who taught me to paint 30 yrs ago. He said..... yeah I picked it up on clearance and never used it. 😂🤣

2-4:7-12 That's such a powerful scripture that I live by and continually experience the Power of the Holy Spirit because of it. Praise Jesus! Thank you

@peterlevy7679

2 жыл бұрын

What are you talking about

@Sly_Wolf_1

2 жыл бұрын

@@peterlevy7679 @0.58 to 0.59 look on the left door just below the top payne of glass, you will see the reference to it in faint silver letters. Blink and it's gone.

Do you have a problem with the door weather stripping adhering to the newly painted door, especially if the door doesn't get used often?

Quick question How do you go about cleaning paint off, for example your car seat or inside door panels I don’t want to test any solvent and risk further damage or spread...???

Make a video about how to add a pressure gauge to a titan 440, it’s super cheap and helps a ton

Can I get a link for those steel door hangers please? I can't find them on the same site as the rest of the items listed. This video was very informative thanks.

Great Video! What is an injection card? In case you get injected with what?

You could also use 12 inch masking paper instead of 3m plastic. 2 bucks a roll vs 12. Also it's going on a window so frog tape wouldn't be necessary on this project. If anything bleeds though which shouldnt since tape sticks very well to a window just take a window scraper and clean up the edges. Otherwise nice job.

Tip when putting tape on Windows use your 5in one tool tu cut the tape put the tip of the fiveone at an angle and pull your tape sideways and you will always get a clean cut

@lupillocovarrubias

4 жыл бұрын

Ese tip yo lo hago desde k empeze a pintar hace como 15 años, y este señor porque no lo hace tambien?

@pepescutiaje

4 жыл бұрын

@@lupillocovarrubias hay q aser un vídeo para mostrar como asemos las cosas tal vez aprendan algo d nuestro método así como Nosotros Aprendemos de los métodos de Él.

3inch angle knife works great for clean tape cuts

What do you do about the hinge mortices? Do you mask them?

Ppg👍🏻💥 Thank you for sharing didn't know about this either

@Idahopainter

7 ай бұрын

Happy to help

Every time I shoot a door out in the open bugs are on it immediately

@ryankerans1224

4 жыл бұрын

They make an additive you can box into the paint to repel bugs. Also, I've had some success spraying doors and such outside during the early spring months when the bugs are still dead from the winter.

@lexandersantana8089

4 жыл бұрын

Use sherwin Williams Solo, drys super quick

@assks92

2 жыл бұрын

Florida?

@benwilkinson5457

Жыл бұрын

I immediately thought about small flies/bugs etc

I'm viwer number 7:-):-)

Expensive paint job

@Idahopainter

2 жыл бұрын

OK

Its a shame but we don't have professional painters like you in Florida where I live. No quality, no pride in their work. Just speed and go! And want their money for crapy job! Thanks for video, I suspect to get a goid quality paint job around here there will be more DIY painters because of your videos!

What type of sneakers you wear they look very comfy.

The green hose what brand is it ? Is it special looks more flexible

I recommend My Lord Berry the liquid masking h20 on windows glass easy and fast

just wandering, in your opinion, what`s the difference between that paint and laquer from the pros and cons side, i notice in other videos you use laquers for durability and fast drying, why not on those doors?

How did you prop the doors up to paint them?

Do you have a video explaining how to use an airless sprayer? And the difference between leading brand sprayers. (Wagner, Titan, graco, etc)

I see they have air assisted sprayers, and you get a much finer finish, perhaps you should do some videos on one of them

I like to use gloves putting the freshly painted doors back on. Just the oil from your skin can mess with the fresh paint

@Idahopainter

4 жыл бұрын

🤙yes!

I prefer to use a Titan Capspray HVLP to spray doors if it's only like two doors. Although painting takes a little more time with the HVLP fine finish sprayer, cleanup with the HVLP takes way less time than an airless... Less time cleanup = more $$$

My dad got injected (self inflicted of course) and had to go to the ER. It was a mess because it was drying in there and had scattered. They got it all but it wasn't exactly pleasant and the doctor told him had he waited any longer he could have lost his leg.

hi chris i have a question i know you are good at answering your coments how long should it take 1 person to paint a 1 bedroom 1 bathroom apartment ceiling is flat white walls eggshell gosner veil bathroom and laundry rooms are semi gloss white on cieling and semi gloss gossner veil on walls all trim is semi gloss white also how long on 2 bedroom 2 bathroom same paint scheem i have a sprayer 9 inch rollers and brushes thanks in advance

I did not find a link for the paint used. I also noticed that you did not mention and apply primer. When would you need to use a primer? Thanks for making the video!

When you were taping up the weather strip, the frog tape sounded like a frog as you were running the tape off 😆

@Idahopainter

3 жыл бұрын

lol

Compa estas haciendo un desmadre de over spray yo uso es pintura es muy buena pero no al aire libre y kieres buen finish mucha contaminación en el aire

@ajolote7193

4 жыл бұрын

Oscar Alberto se le olvido usar el carboard shield a Crish ademas esta alta la presion 2300 psi.. pero comparte con que maquina pistola y hasta el tip que usas y a que presion asi tener mas ideas para pintar este tipo de puertas gracias mano.

This was informative.. I did my room door once just using normal brush.. Where I can this spring machine and can I use it for the walls as well.

@ajolote7193

4 жыл бұрын

RedFox rent one in your local HD

Surprised the doors aren't elevated a bit off the ground? How do you clean up the bottom edges?

Thank you for all your videos....one question, How much could a job like this cost? per door... thank you very much.

How did you spray the bottom edge of the doors?

home depot sell PPG Timeless. Is this comparable to PPG Breakthrough?

Can you spray left to right...seen people do that top bottom what's the difference

Good stuff! I hate painting doors!

Do you mask the hinge mortises?

Do you need to use a different primer if the doors are solid wood and have a dark stain on them, I want white as they are so dark they make the hall feel like a cave.

Hi are you using acrylic paint when you spraying doors

How do you store the sprayer over night to paint next day Graco x7

Have you use Alkyd behr pure white ?

0:57 The dogs in the window gave me a chuckle! ;) One dog gets the other as to say, "Hey, come take a look and this guy." "How do we get this guy to let us out?"

How long did the whole process from start to finish take?

Curious about the card you had in your pocket while you were spraying.?what is it?

@lorrainepuente4594

4 жыл бұрын

The injection card will tell the paramedics some details about the job you were doing or what exactly is it and where can you find those. Google injection injuries they're gross

Did you have to thin the paint down in order to use the 410 tip

Is that a new titan sprayer for the job or what hahah

Wondering if you can use this product to go over varnished wood trim without priming with zinnser first...

@bailey2624

4 жыл бұрын

always sand and prime unless its something your walking away from forever. it also doesnt hold back tannins unless its black lol

You are the best.... I wish I can work for you and your company but you too far to me in front of California

@ 6:20 Chris tells us he's using 410 fine finish paint tip

Looks nice! Quick question though, When I have sprayed doors I have had to wait at least a day before moving them to install because even with clean gloves on it can leave fingerprint blemishes on the paint before it cures. How do you not leave those blemishes in such short dry time?

@trackhoecaves92

2 жыл бұрын

8:50

@Nina-tn1xs

2 жыл бұрын

@@trackhoecaves92 Thanks! I don't know how I missed that.

What type of paint did you use on these doors

Would you recommend Breakthrough on kitchen cabinetry

@CCEProductions0

4 жыл бұрын

Ed Conrad I use Breakthrough personally on Cabinets all the time. The product has quite a learning curve, very thin and likes to run, and very short open time window, less than a minute in some cases. So I would definitely experiment with it before going all in.

For us newbies what is an injection card? Also could you comment or make a video on the difference between FF tips and HEA tips. Looking at getting the Titan HEA sprayer and they don't take FF tips and the smallest they go is 311 tips

@juansolorio9683

4 жыл бұрын

It comes when you buy a gun or airless sprayer its so the doctor knows what to do if you accidentally sprsy ur skin and it breacks and gets contaminated with paint

@matan9577

2 жыл бұрын

@@juansolorio9683 Are these airbrushes really so strong so as to break one's skin if accidentally pointed at one's hand or body?!!

@wala3o

2 жыл бұрын

@@matan9577 mine doesn’t do that, maybe his has a hemi engine

The injection card will tell the paramedics some details about the job you were doing or what exactly is it and where can you find those.

@americaneaglepainting187

4 жыл бұрын

The injection card , comes with the sprayer when you purchase a new unit

@krehbein

3 жыл бұрын

Why can’t you tell the paramedics? What does injection mean?

Does the paint work on bare metal?