Doug, you’re awesome. I have wondered about this, and I’m glad that you let everybody know that you have products to take care of this.

@PressureCleaningSch

Жыл бұрын

Thank you

@davidbrucemusicvideo

Жыл бұрын

@@PressureCleaningSch No, thank you!

Great job Doug

@PressureCleaningSch

Жыл бұрын

Thank you Peter. Hope your doing well

Thank you from Japan !

@PressureCleaningSch

Жыл бұрын

Very welcome

Hey Doug thanks for the tips

@PressureCleaningSch

7 ай бұрын

Very welcome

always appreciate you

@PressureCleaningSch

Жыл бұрын

Thanks James

Doug “E” Fresh👍🏻💯

Excellent info.. thanks Doug.. I'm sure there's a range that would be considered standard no different than washing a concrete driveway as opposed to a roof has a different acceptable range in which you would charged.. what's that general range for you for removing for instance the oxidation you demonstrated removing in your video?

@PressureCleaningSch

Жыл бұрын

Just all depends on variables of the job. On these I basically charge by what it will take to get me to do. I don’t really have a range so to speak.

I've got tiny rust dots on my garage door, some thing like u would see on a white car from the break dust, what would you recommend?

@PressureCleaningSch

Ай бұрын

Sounds like you'd need to sand them down, prime, and repaint. They down sound like the type that can be chemically removed

Hello Mr Doug

@PressureCleaningSch

5 ай бұрын

Hello Mrs Patricia. How are you

Doug, doing a aluminum job. Can i soft wash with .75 SH mix and use gutter gaurd to clean it after with a scrub brush?

@PressureCleaningSch

Ай бұрын

That should work fine on the SH mix, just test first. Not sure what gutter guard is. Haven't heard of it.

Question: (and this may or may not be “obvious”) would/could you use this on an oxidized metal roof?

@PressureCleaningSch

Жыл бұрын

Yes. Absolutely

@mid-southsoftwashllc

Жыл бұрын

@@PressureCleaningSch thanks. Probably gonna give this a try if/when this commercial bid is approved.

Question I softwashed a house that was already oxidized and used my sh let dwell and rinsed with low pressure when it dried it look worse than before

@PressureCleaningSch

Жыл бұрын

Yes that can happen depending on how bad the oxidation is.

Mr Doug will you be at the Hugh Convention this weekend in Nashville

@PressureCleaningSch

Жыл бұрын

No sir.

Doug, bonehead move on my part but I clearly striped my vinyl from having too much pressure. Can I use the chemical mentioned to even out and make the stripes less obvious?? thanks!

@PressureCleaningSch

3 ай бұрын

Yes you can!

Question. Do you put the degreaser in your soap or bleach tank to use your 12v system? I'm assuming in the soap and turn the bleach of on the proportioner?

@PressureCleaningSch

Жыл бұрын

I never mix a “degreaser”w bleach. The RAP you can mix w bleach though. Also I don’t use a soap valve. I mix my RAP or surfactant with my bleach. Never going this need or reason to meter soap.

@bretdover3558

Жыл бұрын

@Doug Rucker right. I guess I'm confused. You don't mix bleach with other products and you don't meter surfactant. So where would I put the degreaser in order to use the 12v to spray it on the house?

@PressureCleaningSch

Жыл бұрын

@@bretdover3558 why are you spraying degreaser on a house ?

@bretdover3558

Жыл бұрын

@Doug Rucker in the video you said you would put RAP in your 12v to spray on the house for oxidation? I should have said your product instead of degreaser, my apologies!

@PressureCleaningSch

Жыл бұрын

@@bretdover3558 so on my mixing station I have one valve that isn’t used. I use a hose from it to a five gallon bucket.

Do the oxidation restoration products available work? The apply n rinse ones.

@PressureCleaningSch

5 ай бұрын

I have not tried anything labeled as apply and rinse. I’ve always used our RAP.

What do you do if these lines have already been made?

@PressureCleaningSch

9 ай бұрын

Use our RAP to remove the oxidation. Have videos on it on the channel

I don't know what your talking about, I've been pressuring washing for years and applying pressure to oxidized surfaces it does come off, just be careful watch what your doing. IT Does come off

@PressureCleaningSch

3 ай бұрын

Don’t think I ever said it won’t come off.

Christ I was looking for new ideas to remove oxidation, not the damn science of oxidation

@PressureCleaningSch

2 ай бұрын

Well you got the bonus plan.