BEST UPGRADE FOR YOUR LEAF BLOWER! | Ego, Dewalt, Milwaukee, Ryobi
Автокөліктер мен көлік құралдары
Leaf Blowers are an amazing way to dry your car or clean up around your home. But this small upgrade will drastically improve your user experience. Changing out the long nozzle attachment to a short stubby nozzle allows you have to have more more control and give you a more balanced feel. In todays video I will highlight the nozzle I have been using and compare it to the new version specifically made for the Ego Blower. But dont worry, no matter what brand of blower you are using, you can find a stubby nozzle version to make your blowing efforts much easier... ENJOY!!!
See the items I use and join the mailing list at: www.DTLRsupply.com
ITEMS IN THIS VIDEO:
Stubby Nozzle Co attachments:
For Ego - amzn.to/4bSto4a
For Milwaukee - amzn.to/4e9Yeqr
For Dewalt - amzn.to/45aVjK5
For Greenworks - amzn.to/3Rhdqbx
For Makita - amzn.to/3X8V8wM
Blower Band rubber attachments - bit.ly/4c8hBOP
ApexAire Short Nozzle - bit.ly/4eaM5S2
NEW Ego Brand Short nozzle - amzn.to/3xhYyCJ
Ego 765cfm Blower - amzn.to/3XhfIuT
TIME CODES:
0:00 - Best Upgrade for your leaf blower
0:33 - Short blower attachment for car detailing
0:54 - My favorite stubby nozzle
1:46 - Stubby Nozzle Co Attachments
2:39 - NEW Ego Blower Short Attachment
3:29 - Comparing Stubby Nozzles for your leaf blower
12:14 - Final Thoughts and Opinions
#cardetailing #leafblower #stubbynozzle #ego #milwaukee #ryobi #greenworks #dewalt #makita
**These are affiliate links to the products. We make a small commission on anything purchased from our links.
Disclaimer:
Due to factors beyond my control, I cannot guarantee against improper use of the information I share in my videos. (IMJOSHV) assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not (IMJOSHV) or any business affiliated to (IMJOSHV).
Пікірлер: 91
The ego attachment here is the no brainer pick here, price plus ease of removing.
Forgive my ignorance, but isn't $70 for what is essentially a plastic cylinder too much? I feel like detailing oriented products are becoming too expensive. What's going on? I understand that the price can be justified because it's a niche, but there comes a point where it feels like I'm being ripped off. I seriously don't understand how a plastic cylinder can cost more than $10 to make.
@Kurial94
2 ай бұрын
Yep it’s certainly expensive for a 3D printed and simple designed product
@dekoeneridder2452
2 ай бұрын
You are absolutely right and you are being ripped off:)
@emp0rizzle
2 ай бұрын
@@Kurial94 haha that's not 3D printed. That's clearly injection molded plastic. EGO has the resources to design their own stubby attachment in-house and the economies of scale to produce it at a fraction of the cost.
@emp0rizzle
2 ай бұрын
It cost money to design and make parts. Someone paid an engineer/designer to design the attachment. Someone paid to make an injection mold for the part. Injection molding is very expensive. And since it's a small company catering to a niche and it doesn't seem like they make anything else, it's a low volume. Ego can produce the same part at a fraction of the price because 1) it has economies of scale and in-house engineers 2) they're billion dollar company or rather part of a company that has a market cap of 1B+
@RICARD01
2 ай бұрын
Got mine on Amazon. $29 all damn day
So glad Ego finally made one. I’ve had two stubby nozzles. Broke one and it’s impossible to get off lol😂 don’t worry ur experience was about standard getting it off!
I have a greenworks. I took the extension off and wrapped the edge with a thick soft tape. Didn’t know stubbies were a thing
I put the blower band on top of the new stubby. Looks better and a little more protection!
New to the EGO universe, but I love my lawn mower. Been looking to replace my Worx blower (horrible batteries) with a 765 EGO. After watching this, it's on order with the stubby nozzle. Thanks Josh!
Thanks Josh. I have both as well and like you left the stubby nozzle co one on there as it is not the easiest to remove but it works well leaving it on. The Ego version is also nice. It looks good even adding a blower band onto it as well even though it is not needed. Like you showcased it is easy to remove that one if needed.
@2:58 I have the ego short tube. The little tab is so you can attach the OEM wide fan nozzle if you wanted to that came with the blower.
I love the Ego brand stubby nozzle! Paired with a 2.5 Ah battery it's the perfect weight and balance. I'm just not a fan of the 3D printed look of the Stubby brand nozzle.
I was an early adopter of the ApexAire because I was fed up that EGO were late to the party. However, after many washes the second attachment took off on me and hit the roof of my car a few weeks ago. Let me just say I will be ordering the EGO one very soon because I believe it is shorter too!
Another great video ! I’ve learned so much from your channel . My whole pressure washer set up was all from your RYOBI 1800 psi videos including all upgrades you suggested . So stoked on the performance .
I have used the short tube that the ego gutter cleaning kit has in it. It is about 9 5/8 long . It seems just a tad narrower on the end but maybe it is just thinner. I wish it had the rubbery end on it when using it on the car.
@imjoshv
2 ай бұрын
I bet the blower band would fit on it!
Josh, I struggled removing my stubby nozzle at first however, after watching the video from Stubby nozzle it removes very easily.
The stubble nozzle co is made out of PETG and they are 3d printed. The one from Ego not too sure. Either option looks great to me, the one from obsessed is rather expensive.
If I had a battery blower I would definitely look into a stubby nozzle, thanks Josh 👍😁
Great video Josh! Get the Ego stubby add the band and call it a day. Fits the best, it’s made by the same company making the blower and it’s priced appropriately, no brainer! I was an early adopter for the Apexaire and it’s a joke, I use it as an expensive paperweight.
Tab on the new stubby is so you can add other EGO attachments. Basically you can have it short or add a piece that came with your blower and make it the same length as the Apex Air. Or have a shorty leaf blower.
I am not positive... So don't roast me but on the ego I believe the thin metal strip embedded in the blowers housing that you thought might be for alignment is actually a static wick or drain so that you don't get the dog piss knocked out of you every time you use it. There is enough air moving thru that thing to create lightning!
Amazing video and perfect timing, thank you! Ordering the Ego version via your link, thanks!
I have a Stubby Nozzle Co. one for my Makita, it needs a screw to hold it on. I leave it one anyway as I have a Stihl petrol blower/vac for yard work, although I do find myself just grabbing the Makita 😀
I have Milwaukee batteries and will buy a shorty leaf blower and nozzle.
The stubby on the left is the best!!!!
Thanks for the video Josh. I purchased the highly-overpriced Apexaire model a couple years ago because to my knowledge there wasn't another alternative to it. Seeing all the lower-priced similar items afterwards made me wish I had waited.
When are you going to make a video about the ecoBooster? (It has only been available for a few weeks.) This thing is an absolute revolution in high-pressure cleaning! It delivers much more power, even for older devices, is much quieter, has less recoil, and is much more comfortable to use. The jet is much more homogeneous, allowing for the cleaning of delicate surfaces. Thanks to the wider and stronger jet, you can finish cleaning much faster.
Got one from Amazon for $22 and no issues
Have you seen the Powryte electric pressure washer line?
Is there not an additional attachment to restrict the diameter of the stubby tool further for precision work? It seems suboptimal to have to have another whole smaller leaf blower in your workflow for that task as opposed to just adding the equivalent of a crevice tool attachment for the Ego blower.
Thanks Josh!!!
Your local library may be able to print a nozzle out for you for a more affordable cost.
Josh the one you have had for a year that you use is 3D printed. That's why it has all those little lines.
I have the Stubby Nozzle for my EGO and find it difficult to remove.
Of course Obsessed Garage uses an EGO blower, helps supplements his ego.
CSW has the Stubby nozzle on clearance right now @ $12.99
Do you now use this to dry your cars or do you still use the little Ryobi blower?
Could you make a video on how to tackle stuff stuck in carpets. For example I was detailing a customers car the other day and it seems as if they had sand and splinters from wood in the threads of the carpets and that took me about 1 hour just to finish that part of the car.
@TJsVette
2 ай бұрын
This may sound crazy but get a massage gun with the ball attachment and use that to loosen up the sand and other stuff. Just have your vacuum near to suck it all up.
Made this video much longer than it should’ve been! 🤦🏽♂️
you have ryobi in the title but i dont see a link for any attachments for it. the apexaire doesnt look like it would work with my ryobi?
Josh… As far as Ego CFM, 670 good enough? 765 will be that much better?
I have the Apex. Been wanting to replace it. It disconnects too easily with a light bump of the leg.
@imjoshv
2 ай бұрын
Great to know… thanks for the input!
The moment we realized that having a stubby is a good thing...
Ego is the best
I love EGO products but out of the 5 batteries I've got 2 of them have gone bad after just a couple of years and those things aren't cheap! Dewalt & Milwaukee batteries seem way more reliable.
$70 for a very basic 3D print is crazy
This is unrelated but need some help. I got a 2300 psi ryobi pressure washer on marketplace for cheap. Wondering if this is okay for cars?
@imjoshv
2 ай бұрын
Absolutely! If any worry just keep the top of the pressure washer a little bit further back so by the time it impacts the panel the pressure is lower. Here’s a video I did on that one kzread.info/dash/bejne/d6x1scmOoLKWqbw.htmlsi=i1g1qXLKQkL9k3QC
@prime1192
2 ай бұрын
@@imjoshv really appreciate the reply! Just watched that video as well. Would you recommend a 3.5 orifice with a 40 degree tip to be safe?
With the stubby nozzles you need headphones because the blower screams!
One reason I don't buy ego blower is I can only use ego battery for 1 tool.
Kept waiting for you to give a comparison drying the car off, or demonstration showing the difference in blowing between stubby nozzle and the regular long... Never came... Sad
I just remove the long nozzle and use it without any… and I make sure not to slam it into my vehicle 😂 This seems unnecessary.
Whoa, whoa, whoa… Matt Moreman sells something for twice the price of a comparable product??? 🤯 bet he has a long winded video about how long the development took to make it perfect… 🙄
@NO_OPEC_NO_PROBLEM
2 ай бұрын
Oh of course, goes in lines with Matt’s $87,382 pressure washer setup. We all know why Matt chooses EGO as his brand of course.. helps his ego out. Overpriced Garage.
I'd get the ego one. Wouldn't ever purchase anything from OG.
When do you find time to work
@imjoshv
2 ай бұрын
I know right. When I first started the channel I was doing 3 videos a week… easy 60+ hours a week
@Brian-tu7yn
2 ай бұрын
@imjoshv I have found myself wondering the same. Then makes me believe I’m slower than hell at detailing my own car on the weekends if you’re able to run a business and a YT channel. Your content is great tho. Thank you!
I’m actually not a fan of the stubby nozzles. Doesn’t focus the air enough in one area so you have to hold the blower really close to whatever you’re blowing out. It spreads out the air too much and feels really underpowered vs a more “pointy” outlet.
@imjoshv
2 ай бұрын
Yea the tlsmaller the opening definitely helps to focus the air flow.z I use these for removing the bulk of water and then a smaller unit with a narrower opening to remove all the water from the tight spots
I really enjoy your informative videos, Josh!!! I respect that you use the EGO brand blower, but after watching the Stuuby video, I went with the Greenworks. It's just me at home, so hopefully, I don't have any issues. If I do, I got it from Costco, so it'll be returnable. After watching this, I'll definitely get the stubby nozzle. THANKS AGAIN FOR THE GREAT VIDEOS!!! kzread.info/dash/bejne/nmF-tbqFaZSxitY.htmlsi=-uV6rO_0h3SG82uQ Just make sure Stubby nozzle is for the actual model blower you have - I know it sounds silly but each brand model is a little different.
Too late! I already got my stubby last year and it works just fine. I think I paid around the same price as the ego.
The Stubby Nozzle brand does work well but it is a @#$% to get off my EGO.
I bought www.amazon.com/gp/product/B0BQMR622L . Fits and operates just as the stock attachments. If EGO had theirs out I'd have bought EGO, idk why you would buy anything else. The other 2 you linked are overpriced and way overpriced. They filled a void when there wasn't any other options, but now there are endless cheaper options.
$25 on eBay
Cheaper to just cut the original 😂
It's cheap 3d printed material for milwaukee. Breaks easily
1ST TO COMMENT!!!!
Sorry, but that is not a "nice" material. Those ridges indicate that it's just a 3D printed cylinder. It's not even printed that thick. $40+ for a 3D printed cylinder that probably used not even 5 cents worth of filament....no thanks.
@imjoshv
2 ай бұрын
I just speak on my personal use case and it’s been used everyday in my business and banged around and it’s held up well!
@MC-ht6lw
2 ай бұрын
It works great. You're a cheapskate.
$40 for a stubby EGO nozzle. I don't agree with "Sleepy Joe" our worthless president much, but this $5 worth of plastic.
These are useless and not needed
@imjoshv
2 ай бұрын
That’s true you can definitely live without them, but I do prefer using them
Thats great bro but u missed the most powerful and best one being the CAT smfh...... IDN why every KZread who does a review on these things always leaves the very best one out its just dumb.
@petertorres5813
Ай бұрын
I'm tired of seeing reviews about these blowers and I haven't seen anyone including the one you say is the best. Maybe it's just the best for you.
@TENNESSEETRACKHAWK
Ай бұрын
@@petertorres5813 look for urself snowflake. It’s the best one out period. Has the most power. Can be made a shorty. There is this thing called Google. U shud look it up
@iamjoshv Take note Josh and all others that insist on buying Killed In Auto (KIA) vehicles (misnomer): Kia recalling 463,000 Telluride SUVs because the front seats can catch fire *Owners warned to park vehicles outside. #NeverKIA